You are viewing this page in an unauthorized frame window.
This is a potential security issue, you are being redirected to
https://nvd.nist.gov
An official website of the United States government
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock () or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.
This CVE record has recently been published to the CVE List and has been included within the NVD dataset.
Description
The 'podman quadlet install --replace' command opens the existing destination file with O_CREATE|O_WRONLY but omits O_TRUNC. When the initial reflink copy attempt fails (common on non-reflink-capable filesystems including many RHEL default XFS configurations), the fallback in ReflinkOrCopy uses io.Copy which performs a non-truncating write. If the original Quadlet is larger than the new Quadlet, the file is not truncated and content from the original is preserved. The command completes with no warning.
There is no risk of information leakage as the user already had access to the Quadlet in order to replace it, and in most cases, this would only lead to invalid Quadlet files. However, security-related options from the end of the old Quadlet could be included in the new Quadlet, and if the truncation resulted in a valid Quadlet file, this could result in undesirable behavior. For example, running podman quadlet install --replace to remove a single line from the end of a Quadlet - including security-sensitive content, like AddCapability - will fail, and the option will continue to be used. Further, with Volume Quadlets, this can include additional mounts which can cause content to be unintentionally exposed into containers. If, later, the image is updated then compromised content might be leaked to an attacker.
The vulnerable code paths are in pkg/domain/infra/abi/quadlet.go (lines 338-360, O_CREATE|O_WRONLY without O_TRUNC) and vendor/go.podman.io/storage/pkg/fileutils/reflink_linux.go (lines 12-19, non-truncating io.Copy fallback).
Metrics
NVD enrichment efforts reference publicly available information to associate
vector strings. CVSS information contributed by other sources is also
displayed.
By selecting these links, you will be leaving NIST webspace.
We have provided these links to other web sites because they
may have information that would be of interest to you. No
inferences should be drawn on account of other sites being
referenced, or not, from this page. There may be other web
sites that are more appropriate for your purpose. NIST does
not necessarily endorse the views expressed, or concur with
the facts presented on these sites. Further, NIST does not
endorse any commercial products that may be mentioned on
these sites. Please address comments about this page to [email protected].
A flaw was found in Podman 5.8.x. The 'podman quadlet install --replace' command opens the existing destination file with O_CREATE|O_WRONLY but omits O_TRUNC. When the initial reflink copy attempt fails (common on non-reflink-capable filesystems including many RHEL default XFS configurations), the fallback in ReflinkOrCopy uses io.Copy which performs a non-truncating write. If the original Quadlet is larger than the new Quadlet, the file is not truncated and content from the original is preserved. The command completes with no warning.
There is no risk of information leakage as the user already had access to the Quadlet in order to replace it, and in most cases, this would only lead to invalid Quadlet files (see https://github.com/podman-container-tools/podman/issues/29013). However, security-related options from the end of the old Quadlet could be included in the new Quadlet, and if the truncation resulted in a valid Quadlet file, this could result in undesirable behavior. For example, running podman quadlet install --replace to remove a single line from the end of a Quadlet - including security-sensitive content, like AddCapability - will fail, and the option will continue to be used. Further, with Volume Quadlets, this can include additional mounts which can cause content to be unintentionally exposed into containers. If, later, the image is updated then compromised content might be leaked to an attacker.
The vulnerable code paths are in pkg/domain/infra/abi/quadlet.go (lines 338-360, O_CREATE|O_WRONLY without O_TRUNC) and vendor/go.podman.io/storage/pkg/fileutils/reflink_linux.go (lines 12-19, non-truncating io.Copy fallback).
The 'podman quadlet install --replace' command opens the existing destination file with O_CREATE|O_WRONLY but omits O_TRUNC. When the initial reflink copy attempt fails (common on non-reflink-capable filesystems including many RHEL default XFS configurations), the fallback in ReflinkOrCopy uses io.Copy which performs a non-truncating write. If the original Quadlet is larger than the new Quadlet, the file is not truncated and content from the original is preserved. The command completes with no warning.
There is no risk of information leakage as the user already had access to the Quadlet in order to replace it, and in most cases, this would only lead to invalid Quadlet files. However, security-related options from the end of the old Quadlet could be included in the new Quadlet, and if the truncation resulted in a valid Quadlet file, this could result in undesirable behavior. For example, running podman quadlet install --replace to remove a single line from the end of a Quadlet - including security-sensitive content, like AddCapability - will fail, and the option will continue to be used. Further, with Volume Quadlets, this can include additional mounts which can cause content to be unintentionally exposed into containers. If, later, the image is updated then compromised content might be leaked to an attacker.
The vulnerable code paths are in pkg/domain/infra/abi/quadlet.go (lines 338-360, O_CREATE|O_WRONLY without O_TRUNC) and vendor/go.podman.io/storage/pkg/fileutils/reflink_linux.go (lines 12-19, non-truncating io.Copy fallback).
New CVE Received from Red Hat, Inc.8/13/2026 2:17:25 PM
Action
Type
Old Value
New Value
Added
Description
A flaw was found in Podman 5.8.x. The 'podman quadlet install --replace' command opens the existing destination file with O_CREATE|O_WRONLY but omits O_TRUNC. When the initial reflink copy attempt fails (common on non-reflink-capable filesystems including many RHEL default XFS configurations), the fallback in ReflinkOrCopy uses io.Copy which performs a non-truncating write. If the original Quadlet is larger than the new Quadlet, the file is not truncated and content from the original is preserved. The command completes with no warning.
There is no risk of information leakage as the user already had access to the Quadlet in order to replace it, and in most cases, this would only lead to invalid Quadlet files (see https://github.com/podman-container-tools/podman/issues/29013). However, security-related options from the end of the old Quadlet could be included in the new Quadlet, and if the truncation resulted in a valid Quadlet file, this could result in undesirable behavior. For example, running podman quadlet install --replace to remove a single line from the end of a Quadlet - including security-sensitive content, like AddCapability - will fail, and the option will continue to be used. Further, with Volume Quadlets, this can include additional mounts which can cause content to be unintentionally exposed into containers. If, later, the image is updated then compromised content might be leaked to an attacker.
The vulnerable code paths are in pkg/domain/infra/abi/quadlet.go (lines 338-360, O_CREATE|O_WRONLY without O_TRUNC) and vendor/go.podman.io/storage/pkg/fileutils/reflink_linux.go (lines 12-19, non-truncating io.Copy fallback).
[{"vendor":"Red Hat","product":"Red Hat Ansible Automation Platform 2","defaultStatus":"unaffected","collectionURL":"https://access.redhat.com/downloads/content/package-browser/","packageName":"ansible-automation-platform-24/eda-controller-rhel8","cpes":["cpe:/a:redhat:ansible_automation_platform:2"]},{"vendor":"Red Hat","product":"Red Hat Ansible Automation Platform 2","defaultStatus":"unaffected","collectionURL":"https://access.redhat.com/downloads/content/package-browser/","packageName":"ansible-automation-platform-25/eda-controller-rhel8","cpes":["cpe:/a:redhat:ansible_automation_platform:2"]},{"vendor":"Red Hat","product":"Red Hat Ansible Automation Platform 2","defaultStatus":"unaffected","collectionURL":"https://access.redhat.com/downloads/content/package-browser/","packageName":"ansible-automation-platform-26/eda-controller-rhel9","cpes":["cpe:/a:redhat:ansible_automation_platform:2"]},{"vendor":"Red Hat","product":"Red Hat Ansible Automation Platform 2","defaultStatus":"unaffected","collectionURL":"https://access.redhat.com/downloads/content/package-browser/","packageName":"ansible-automation-platform-27/eda-controller-rhel9","cpes":["cpe:/a:redhat:ansible_automation_platform:2"]},{"vendor":"Red Hat","product":"Red Hat Enterprise Linux 10","defaultStatus":"affected","collectionURL":"https://access.redhat.com/downloads/content/package-browser/","packageName":"podman","cpes":["cpe:/o:redhat:enterprise_linux:10"]},{"vendor":"Red Hat","product":"Red Hat Enterprise Linux 8","defaultStatus":"unaffected","collectionURL":"https://access.redhat.com/downloads/content/package-browser/","packageName":"container-tools:rhel8/podman","cpes":["cpe:/o:redhat:enterprise_linux:8"]},{"vendor":"Red Hat","product":"Red Hat Enterprise Linux 9","defaultStatus":"affected","collectionURL":"https://access.redhat.com/downloads/content/package-browser/","packageName":"podman","cpes":["cpe:/o:redhat:enterprise_linux:9"]},{"vendor":"Red Hat","product":"Red Hat Hardened Images","defaultStatus":"affected","collectionURL":"https://access
Quick Info
CVE Dictionary Entry: CVE-2026-19730 NVD
Published Date: 08/13/2026 NVD
Last Modified: 08/13/2026
Source: Red Hat, Inc.
) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.
