Search Results (Refine Search)
- CPE Product Version: cpe:/a:digium:asterisk:14.0
Vuln ID | Summary | CVSS Severity |
---|---|---|
CVE-2023-49786 |
Asterisk is an open source private branch exchange and telephony toolkit. In Asterisk prior to versions 18.20.1, 20.5.1, and 21.0.1; as well as certified-asterisk prior to 18.9-cert6; Asterisk is susceptible to a DoS due to a race condition in the hello handshake phase of the DTLS protocol when handling DTLS-SRTP for media setup. This attack can be done continuously, thus denying new DTLS-SRTP encrypted calls during the attack. Abuse of this vulnerability may lead to a massive Denial of Service on vulnerable Asterisk servers for calls that rely on DTLS-SRTP. Commit d7d7764cb07c8a1872804321302ef93bf62cba05 contains a fix, which is part of versions 18.20.1, 20.5.1, 21.0.1, amd 18.9-cert6. Published: December 14, 2023; 3:15:52 PM -0500 |
V3.1: 5.9 MEDIUM V2.0:(not available) |
CVE-2023-49294 |
Asterisk is an open source private branch exchange and telephony toolkit. In Asterisk prior to versions 18.20.1, 20.5.1, and 21.0.1, as well as certified-asterisk prior to 18.9-cert6, it is possible to read any arbitrary file even when the `live_dangerously` is not enabled. This allows arbitrary files to be read. Asterisk versions 18.20.1, 20.5.1, and 21.0.1, as well as certified-asterisk prior to 18.9-cert6, contain a fix for this issue. Published: December 14, 2023; 3:15:52 PM -0500 |
V3.1: 7.5 HIGH V2.0:(not available) |
CVE-2023-37457 |
Asterisk is an open source private branch exchange and telephony toolkit. In Asterisk versions 18.20.0 and prior, 20.5.0 and prior, and 21.0.0; as well as ceritifed-asterisk 18.9-cert5 and prior, the 'update' functionality of the PJSIP_HEADER dialplan function can exceed the available buffer space for storing the new value of a header. By doing so this can overwrite memory or cause a crash. This is not externally exploitable, unless dialplan is explicitly written to update a header based on data from an outside source. If the 'update' functionality is not used the vulnerability does not occur. A patch is available at commit a1ca0268254374b515fa5992f01340f7717113fa. Published: December 14, 2023; 3:15:52 PM -0500 |
V3.1: 8.2 HIGH V2.0:(not available) |
CVE-2020-35652 |
An issue was discovered in res_pjsip_diversion.c in Sangoma Asterisk before 13.38.0, 14.x through 16.x before 16.15.0, 17.x before 17.9.0, and 18.x before 18.1.0. A crash can occur when a SIP message is received with a History-Info header that contains a tel-uri, or when a SIP 181 response is received that contains a tel-uri in the Diversion header. Published: January 29, 2021; 3:15:10 AM -0500 |
V3.1: 6.5 MEDIUM V2.0: 4.0 MEDIUM |
CVE-2017-17090 |
An issue was discovered in chan_skinny.c in Asterisk Open Source 13.18.2 and older, 14.7.2 and older, and 15.1.2 and older, and Certified Asterisk 13.13-cert7 and older. If the chan_skinny (aka SCCP protocol) channel driver is flooded with certain requests, it can cause the asterisk process to use excessive amounts of virtual memory, eventually causing asterisk to stop processing requests of any kind. Published: December 01, 2017; 7:29:00 PM -0500 |
V3.0: 7.5 HIGH V2.0: 5.0 MEDIUM |
CVE-2017-14603 |
In Asterisk 11.x before 11.25.3, 13.x before 13.17.2, and 14.x before 14.6.2 and Certified Asterisk 11.x before 11.6-cert18 and 13.x before 13.13-cert6, insufficient RTCP packet validation could allow reading stale buffer contents and when combined with the "nat" and "symmetric_rtp" options allow redirecting where Asterisk sends the next RTCP report. Published: October 09, 2017; 9:30:21 PM -0400 |
V3.0: 7.5 HIGH V2.0: 5.0 MEDIUM |
CVE-2017-14100 |
In Asterisk 11.x before 11.25.2, 13.x before 13.17.1, and 14.x before 14.6.1 and Certified Asterisk 11.x before 11.6-cert17 and 13.x before 13.13-cert5, unauthorized command execution is possible. The app_minivm module has an "externnotify" program configuration option that is executed by the MinivmNotify dialplan application. The application uses the caller-id name and number as part of a built string passed to the OS shell for interpretation and execution. Since the caller-id name and number can come from an untrusted source, a crafted caller-id name or number allows an arbitrary shell command injection. Published: September 02, 2017; 12:29:00 PM -0400 |
V3.0: 9.8 CRITICAL V2.0: 7.5 HIGH |
CVE-2017-14099 |
In res/res_rtp_asterisk.c in Asterisk 11.x before 11.25.2, 13.x before 13.17.1, and 14.x before 14.6.1 and Certified Asterisk 11.x before 11.6-cert17 and 13.x before 13.13-cert5, unauthorized data disclosure (media takeover in the RTP stack) is possible with careful timing by an attacker. The "strictrtp" option in rtp.conf enables a feature of the RTP stack that learns the source address of media for a session and drops any packets that do not originate from the expected address. This option is enabled by default in Asterisk 11 and above. The "nat" and "rtp_symmetric" options (for chan_sip and chan_pjsip, respectively) enable symmetric RTP support in the RTP stack. This uses the source address of incoming media as the target address of any sent media. This option is not enabled by default, but is commonly enabled to handle devices behind NAT. A change was made to the strict RTP support in the RTP stack to better tolerate late media when a reinvite occurs. When combined with the symmetric RTP support, this introduced an avenue where media could be hijacked. Instead of only learning a new address when expected, the new code allowed a new source address to be learned at all times. If a flood of RTP traffic was received, the strict RTP support would allow the new address to provide media, and (with symmetric RTP enabled) outgoing traffic would be sent to this new address, allowing the media to be hijacked. Provided the attacker continued to send traffic, they would continue to receive traffic as well. Published: September 02, 2017; 12:29:00 PM -0400 |
V3.0: 7.5 HIGH V2.0: 5.0 MEDIUM |
CVE-2017-14098 |
In the pjsip channel driver (res_pjsip) in Asterisk 13.x before 13.17.1 and 14.x before 14.6.1, a carefully crafted tel URI in a From, To, or Contact header could cause Asterisk to crash. Published: September 02, 2017; 12:29:00 PM -0400 |
V3.0: 7.5 HIGH V2.0: 5.0 MEDIUM |
CVE-2017-7617 |
Remote code execution can occur in Asterisk Open Source 13.x before 13.14.1 and 14.x before 14.3.1 and Certified Asterisk 13.13 before 13.13-cert3 because of a buffer overflow in a CDR user field, related to X-ClientCode in chan_sip, the CDR dialplan function, and the AMI Monitor action. Published: April 10, 2017; 10:59:00 AM -0400 |
V3.0: 8.8 HIGH V2.0: 6.5 MEDIUM |
CVE-2016-9937 |
An issue was discovered in Asterisk Open Source 13.12.x and 13.13.x before 13.13.1 and 14.x before 14.2.1. If an SDP offer or answer is received with the Opus codec and with the format parameters separated using a space the code responsible for parsing will recursively call itself until it crashes. This occurs as the code does not properly handle spaces separating the parameters. This does NOT require the endpoint to have Opus configured in Asterisk. This also does not require the endpoint to be authenticated. If guest is enabled for chan_sip or anonymous in chan_pjsip an SDP offer or answer is still processed and the crash occurs. Published: December 12, 2016; 4:59:00 PM -0500 |
V3.0: 7.5 HIGH V2.0: 5.0 MEDIUM |
CVE-2011-0495 |
Stack-based buffer overflow in the ast_uri_encode function in main/utils.c in Asterisk Open Source before 1.4.38.1, 1.4.39.1, 1.6.1.21, 1.6.2.15.1, 1.6.2.16.1, 1.8.1.2, 1.8.2.; and Business Edition before C.3.6.2; when running in pedantic mode allows remote authenticated users to execute arbitrary code via crafted caller ID data in vectors involving the (1) SIP channel driver, (2) URIENCODE dialplan function, or (3) AGI dialplan function. Published: January 20, 2011; 2:00:08 PM -0500 |
V3.x:(not available) V2.0: 6.0 MEDIUM |
CVE-2009-2726 |
The SIP channel driver in Asterisk Open Source 1.2.x before 1.2.34, 1.4.x before 1.4.26.1, 1.6.0.x before 1.6.0.12, and 1.6.1.x before 1.6.1.4; Asterisk Business Edition A.x.x, B.x.x before B.2.5.9, C.2.x before C.2.4.1, and C.3.x before C.3.1; and Asterisk Appliance s800i 1.2.x before 1.3.0.3 does not use a maximum width when invoking sscanf style functions, which allows remote attackers to cause a denial of service (stack memory consumption) via SIP packets containing large sequences of ASCII decimal characters, as demonstrated via vectors related to (1) the CSeq value in a SIP header, (2) large Content-Length value, and (3) SDP. Published: August 12, 2009; 6:30:01 AM -0400 |
V3.x:(not available) V2.0: 7.8 HIGH |