In the Linux kernel, the following vulnerability has been resolved: RDMA/ib_srp: Fix a deadlock Remove the flush_workqueue(system_long_wq) call since flushing system_long_wq is deadlock-prone and since that call is redundant with a preceding cancel_work_sync()

In the Linux kernel, the following vulnerability has been resolved: iio: adc: men_z188_adc: Fix a resource leak in an error handling path If iio_device_register() fails, a previous ioremap() is left unbalanced. Update the error handling path and add the missing iounmap() call, as already done in the remove function.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: tsc2046: fix memory corruption by preventing array overflow On one side we have indio_dev->num_channels includes all physical channels + timestamp channel. On other side we have an array allocated only for physical channels. So, fix memory corruption by ARRAY_SIZE() instead of num_channels variable. Note the first case is a cleanup rather than a fix as the software timestamp channel bit in active_scanmask is never set by the IIO core.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: rndis: add spinlock for rndis response list There's no lock for rndis response list. It could cause list corruption if there're two different list_add at the same time like below. It's better to add in rndis_add_response / rndis_free_response / rndis_get_next_response to prevent any race condition on response list. [ 361.894299] [1: irq/191-dwc3:16979] list_add corruption. next->prev should be prev (ffffff80651764d0), but was ffffff883dc36f80. (next=ffffff80651764d0). [ 361.904380] [1: irq/191-dwc3:16979] Call trace: [ 361.904391] [1: irq/191-dwc3:16979] __list_add_valid+0x74/0x90 [ 361.904401] [1: irq/191-dwc3:16979] rndis_msg_parser+0x168/0x8c0 [ 361.904409] [1: irq/191-dwc3:16979] rndis_command_complete+0x24/0x84 [ 361.904417] [1: irq/191-dwc3:16979] usb_gadget_giveback_request+0x20/0xe4 [ 361.904426] [1: irq/191-dwc3:16979] dwc3_gadget_giveback+0x44/0x60 [ 361.904434] [1: irq/191-dwc3:16979] dwc3_ep0_complete_data+0x1e8/0x3a0 [ 361.904442] [1: irq/191-dwc3:16979] dwc3_ep0_interrupt+0x29c/0x3dc [ 361.904450] [1: irq/191-dwc3:16979] dwc3_process_event_entry+0x78/0x6cc [ 361.904457] [1: irq/191-dwc3:16979] dwc3_process_event_buf+0xa0/0x1ec [ 361.904465] [1: irq/191-dwc3:16979] dwc3_thread_interrupt+0x34/0x5c

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Do not change route.addr.src_addr outside state checks If the state is not idle then resolve_prepare_src() should immediately fail and no change to global state should happen. However, it unconditionally overwrites the src_addr trying to build a temporary any address. For instance if the state is already RDMA_CM_LISTEN then this will corrupt the src_addr and would cause the test in cma_cancel_operation(): if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev) Which would manifest as this trace from syzkaller: BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26 Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204 CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416 __list_add_valid+0x93/0xa0 lib/list_debug.c:26 __list_add include/linux/list.h:67 [inline] list_add_tail include/linux/list.h:100 [inline] cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline] rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751 ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102 ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xa30 fs/read_write.c:603 ksys_write+0x1ee/0x250 fs/read_write.c:658 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae This is indicating that an rdma_id_private was destroyed without doing cma_cancel_listens(). Instead of trying to re-use the src_addr memory to indirectly create an any address derived from the dst build one explicitly on the stack and bind to that as any other normal flow would do. rdma_bind_addr() will copy it over the src_addr once it knows the state is valid. This is similar to commit bc0bdc5afaa7 ("RDMA/cma: Do not change route.addr.src_addr.ss_family")

In the Linux kernel, the following vulnerability has been resolved: thermal: int340x: fix memory leak in int3400_notify() It is easy to hit the below memory leaks in my TigerLake platform: unreferenced object 0xffff927c8b91dbc0 (size 32): comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s) hex dump (first 32 bytes): 4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The 72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk. backtrace: [<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0 [<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0 [<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70 [<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal] [<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71 [<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30 [<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0 [<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0 [<ffffffff9c2cb4dd>] kthread+0xfd/0x130 [<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30 Fix it by calling kfree() accordingly.

In the Linux kernel, the following vulnerability has been resolved: btrfs: prevent copying too big compressed lzo segment Compressed length can be corrupted to be a lot larger than memory we have allocated for buffer. This will cause memcpy in copy_compressed_segment to write outside of allocated memory. This mostly results in stuck read syscall but sometimes when using btrfs send can get #GP kernel: general protection fault, probably for non-canonical address 0x841551d5c1000: 0000 [#1] PREEMPT SMP NOPTI kernel: CPU: 17 PID: 264 Comm: kworker/u256:7 Tainted: P OE 5.17.0-rc2-1 #12 kernel: Workqueue: btrfs-endio btrfs_work_helper [btrfs] kernel: RIP: 0010:lzo_decompress_bio (./include/linux/fortify-string.h:225 fs/btrfs/lzo.c:322 fs/btrfs/lzo.c:394) btrfs Code starting with the faulting instruction =========================================== 0:* 48 8b 06 mov (%rsi),%rax <-- trapping instruction 3: 48 8d 79 08 lea 0x8(%rcx),%rdi 7: 48 83 e7 f8 and $0xfffffffffffffff8,%rdi b: 48 89 01 mov %rax,(%rcx) e: 44 89 f0 mov %r14d,%eax 11: 48 8b 54 06 f8 mov -0x8(%rsi,%rax,1),%rdx kernel: RSP: 0018:ffffb110812efd50 EFLAGS: 00010212 kernel: RAX: 0000000000001000 RBX: 000000009ca264c8 RCX: ffff98996e6d8ff8 kernel: RDX: 0000000000000064 RSI: 000841551d5c1000 RDI: ffffffff9500435d kernel: RBP: ffff989a3be856c0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000000 R11: 0000000000001000 R12: ffff98996e6d8000 kernel: R13: 0000000000000008 R14: 0000000000001000 R15: 000841551d5c1000 kernel: FS: 0000000000000000(0000) GS:ffff98a09d640000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00001e9f984d9ea8 CR3: 000000014971a000 CR4: 00000000003506e0 kernel: Call Trace: kernel: <TASK> kernel: end_compressed_bio_read (fs/btrfs/compression.c:104 fs/btrfs/compression.c:1363 fs/btrfs/compression.c:323) btrfs kernel: end_workqueue_fn (fs/btrfs/disk-io.c:1923) btrfs kernel: btrfs_work_helper (fs/btrfs/async-thread.c:326) btrfs kernel: process_one_work (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:212 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2312) kernel: worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2455) kernel: ? process_one_work (kernel/workqueue.c:2397) kernel: kthread (kernel/kthread.c:377) kernel: ? kthread_complete_and_exit (kernel/kthread.c:332) kernel: ret_from_fork (arch/x86/entry/entry_64.S:301) kernel: </TASK>

In the Linux kernel, the following vulnerability has been resolved: riscv: fix oops caused by irqsoff latency tracer The trace_hardirqs_{on,off}() require the caller to setup frame pointer properly. This because these two functions use macro 'CALLER_ADDR1' (aka. __builtin_return_address(1)) to acquire caller info. If the $fp is used for other purpose, the code generated this macro (as below) could trigger memory access fault. 0xffffffff8011510e <+80>: ld a1,-16(s0) 0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here The oops message during booting if compiled with 'irqoff' tracer enabled: [ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 [ 0.041925][ T0] Oops [#1] [ 0.042063][ T0] Modules linked in: [ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29 [ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT) [ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2 [ 0.044601][ T0] ra : restore_all+0x12/0x6e [ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0 [ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020 [ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0 [ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100 [ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45 [ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50 [ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8 [ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000 [ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000 [ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368 [ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d [ 0.046402][ T0] [<ffffffff80003b94>] restore_all+0x12/0x6e This because the $fp(aka. $s0) register is not used as frame pointer in the assembly entry code. resume_kernel: REG_L s0, TASK_TI_PREEMPT_COUNT(tp) bnez s0, restore_all REG_L s0, TASK_TI_FLAGS(tp) andi s0, s0, _TIF_NEED_RESCHED beqz s0, restore_all call preempt_schedule_irq j restore_all To fix above issue, here we add one extra level wrapper for function trace_hardirqs_{on,off}() so they can be safely called by low level entry code.

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix fault in reweight_entity Syzbot found a GPF in reweight_entity. This has been bisected to commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") There is a race between sched_post_fork() and setpriority(PRIO_PGRP) within a thread group that causes a null-ptr-deref in reweight_entity() in CFS. The scenario is that the main process spawns number of new threads, which then call setpriority(PRIO_PGRP, 0, -20), wait, and exit. For each of the new threads the copy_process() gets invoked, which adds the new task_struct and calls sched_post_fork() for it. In the above scenario there is a possibility that setpriority(PRIO_PGRP) and set_one_prio() will be called for a thread in the group that is just being created by copy_process(), and for which the sched_post_fork() has not been executed yet. This will trigger a null pointer dereference in reweight_entity(), as it will try to access the run queue pointer, which hasn't been set. Before the mentioned change the cfs_rq pointer for the task has been set in sched_fork(), which is called much earlier in copy_process(), before the new task is added to the thread_group. Now it is done in the sched_post_fork(), which is called after that. To fix the issue the remove the update_load param from the update_load param() function and call reweight_task() only if the task flag doesn't have the TASK_NEW flag set.

In the Linux kernel, the following vulnerability has been resolved: btrfs: get rid of warning on transaction commit when using flushoncommit When using the flushoncommit mount option, during almost every transaction commit we trigger a warning from __writeback_inodes_sb_nr(): $ cat fs/fs-writeback.c: (...) static void __writeback_inodes_sb_nr(struct super_block *sb, ... { (...) WARN_ON(!rwsem_is_locked(&sb->s_umount)); (...) } (...) The trace produced in dmesg looks like the following: [947.473890] WARNING: CPU: 5 PID: 930 at fs/fs-writeback.c:2610 __writeback_inodes_sb_nr+0x7e/0xb3 [947.481623] Modules linked in: nfsd nls_cp437 cifs asn1_decoder cifs_arc4 fscache cifs_md4 ipmi_ssif [947.489571] CPU: 5 PID: 930 Comm: btrfs-transacti Not tainted 95.16.3-srb-asrock-00001-g36437ad63879 #186 [947.497969] RIP: 0010:__writeback_inodes_sb_nr+0x7e/0xb3 [947.502097] Code: 24 10 4c 89 44 24 18 c6 (...) [947.519760] RSP: 0018:ffffc90000777e10 EFLAGS: 00010246 [947.523818] RAX: 0000000000000000 RBX: 0000000000963300 RCX: 0000000000000000 [947.529765] RDX: 0000000000000000 RSI: 000000000000fa51 RDI: ffffc90000777e50 [947.535740] RBP: ffff888101628a90 R08: ffff888100955800 R09: ffff888100956000 [947.541701] R10: 0000000000000002 R11: 0000000000000001 R12: ffff888100963488 [947.547645] R13: ffff888100963000 R14: ffff888112fb7200 R15: ffff888100963460 [947.553621] FS: 0000000000000000(0000) GS:ffff88841fd40000(0000) knlGS:0000000000000000 [947.560537] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [947.565122] CR2: 0000000008be50c4 CR3: 000000000220c000 CR4: 00000000001006e0 [947.571072] Call Trace: [947.572354] <TASK> [947.573266] btrfs_commit_transaction+0x1f1/0x998 [947.576785] ? start_transaction+0x3ab/0x44e [947.579867] ? schedule_timeout+0x8a/0xdd [947.582716] transaction_kthread+0xe9/0x156 [947.585721] ? btrfs_cleanup_transaction.isra.0+0x407/0x407 [947.590104] kthread+0x131/0x139 [947.592168] ? set_kthread_struct+0x32/0x32 [947.595174] ret_from_fork+0x22/0x30 [947.597561] </TASK> [947.598553] ---[ end trace 644721052755541c ]--- This is because we started using writeback_inodes_sb() to flush delalloc when committing a transaction (when using -o flushoncommit), in order to avoid deadlocks with filesystem freeze operations. This change was made by commit ce8ea7cc6eb313 ("btrfs: don't call btrfs_start_delalloc_roots in flushoncommit"). After that change we started producing that warning, and every now and then a user reports this since the warning happens too often, it spams dmesg/syslog, and a user is unsure if this reflects any problem that might compromise the filesystem's reliability. We can not just lock the sb->s_umount semaphore before calling writeback_inodes_sb(), because that would at least deadlock with filesystem freezing, since at fs/super.c:freeze_super() sync_filesystem() is called while we are holding that semaphore in write mode, and that can trigger a transaction commit, resulting in a deadlock. It would also trigger the same type of deadlock in the unmount path. Possibly, it could also introduce some other locking dependencies that lockdep would report. To fix this call try_to_writeback_inodes_sb() instead of writeback_inodes_sb(), because that will try to read lock sb->s_umount and then will only call writeback_inodes_sb() if it was able to lock it. This is fine because the cases where it can't read lock sb->s_umount are during a filesystem unmount or during a filesystem freeze - in those cases sb->s_umount is write locked and sync_filesystem() is called, which calls writeback_inodes_sb(). In other words, in all cases where we can't take a read lock on sb->s_umount, writeback is already being triggered elsewhere. An alternative would be to call btrfs_start_delalloc_roots() with a number of pages different from LONG_MAX, for example matching the number of delalloc bytes we currently have, in ---truncated---

In the Linux kernel, the following vulnerability has been resolved: cifs: fix double free race when mount fails in cifs_get_root() When cifs_get_root() fails during cifs_smb3_do_mount() we call deactivate_locked_super() which eventually will call delayed_free() which will free the context. In this situation we should not proceed to enter the out: section in cifs_smb3_do_mount() and free the same resources a second time. [Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] Read of size 8 at addr ffff888364f4d110 by task swapper/1/0 [Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 5.17.0-rc3+ #4 [Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019 [Thu Feb 10 12:59:06 2022] Call Trace: [Thu Feb 10 12:59:06 2022] <IRQ> [Thu Feb 10 12:59:06 2022] dump_stack_lvl+0x5d/0x78 [Thu Feb 10 12:59:06 2022] print_address_description.constprop.0+0x24/0x150 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] kasan_report.cold+0x7d/0x117 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] __asan_load8+0x86/0xa0 [Thu Feb 10 12:59:06 2022] rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] rcu_core+0x547/0xca0 [Thu Feb 10 12:59:06 2022] ? call_rcu+0x3c0/0x3c0 [Thu Feb 10 12:59:06 2022] ? __this_cpu_preempt_check+0x13/0x20 [Thu Feb 10 12:59:06 2022] ? lock_is_held_type+0xea/0x140 [Thu Feb 10 12:59:06 2022] rcu_core_si+0xe/0x10 [Thu Feb 10 12:59:06 2022] __do_softirq+0x1d4/0x67b [Thu Feb 10 12:59:06 2022] __irq_exit_rcu+0x100/0x150 [Thu Feb 10 12:59:06 2022] irq_exit_rcu+0xe/0x30 [Thu Feb 10 12:59:06 2022] sysvec_hyperv_stimer0+0x9d/0xc0 ... [Thu Feb 10 12:59:07 2022] Freed by task 58179: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] kasan_set_track+0x25/0x30 [Thu Feb 10 12:59:07 2022] kasan_set_free_info+0x24/0x40 [Thu Feb 10 12:59:07 2022] ____kasan_slab_free+0x137/0x170 [Thu Feb 10 12:59:07 2022] __kasan_slab_free+0x12/0x20 [Thu Feb 10 12:59:07 2022] slab_free_freelist_hook+0xb3/0x1d0 [Thu Feb 10 12:59:07 2022] kfree+0xcd/0x520 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0x149/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae [Thu Feb 10 12:59:07 2022] Last potentially related work creation: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] __kasan_record_aux_stack+0xb6/0xc0 [Thu Feb 10 12:59:07 2022] kasan_record_aux_stack_noalloc+0xb/0x10 [Thu Feb 10 12:59:07 2022] call_rcu+0x76/0x3c0 [Thu Feb 10 12:59:07 2022] cifs_umount+0xce/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] cifs_kill_sb+0xc8/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] deactivate_locked_super+0x5d/0xd0 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0xab9/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: iwlwifi: mvm: check debugfs_dir ptr before use When "debugfs=off" is used on the kernel command line, iwiwifi's mvm module uses an invalid/unchecked debugfs_dir pointer and causes a BUG: BUG: kernel NULL pointer dereference, address: 000000000000004f #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 503 Comm: modprobe Tainted: G W 5.17.0-rc5 #7 Hardware name: Dell Inc. Inspiron 15 5510/076F7Y, BIOS 2.4.1 11/05/2021 RIP: 0010:iwl_mvm_dbgfs_register+0x692/0x700 [iwlmvm] Code: 69 a0 be 80 01 00 00 48 c7 c7 50 73 6a a0 e8 95 cf ee e0 48 8b 83 b0 1e 00 00 48 c7 c2 54 73 6a a0 be 64 00 00 00 48 8d 7d 8c <48> 8b 48 50 e8 15 22 07 e1 48 8b 43 28 48 8d 55 8c 48 c7 c7 5f 73 RSP: 0018:ffffc90000a0ba68 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff88817d6e3328 RCX: ffff88817d6e3328 RDX: ffffffffa06a7354 RSI: 0000000000000064 RDI: ffffc90000a0ba6c RBP: ffffc90000a0bae0 R08: ffffffff824e4880 R09: ffffffffa069d620 R10: ffffc90000a0ba00 R11: ffffffffffffffff R12: 0000000000000000 R13: ffffc90000a0bb28 R14: ffff88817d6e3328 R15: ffff88817d6e3320 FS: 00007f64dd92d740(0000) GS:ffff88847f640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004f CR3: 000000016fc79001 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> ? iwl_mvm_mac_setup_register+0xbdc/0xda0 [iwlmvm] iwl_mvm_start_post_nvm+0x71/0x100 [iwlmvm] iwl_op_mode_mvm_start+0xab8/0xb30 [iwlmvm] _iwl_op_mode_start+0x6f/0xd0 [iwlwifi] iwl_opmode_register+0x6a/0xe0 [iwlwifi] ? 0xffffffffa0231000 iwl_mvm_init+0x35/0x1000 [iwlmvm] ? 0xffffffffa0231000 do_one_initcall+0x5a/0x1b0 ? kmem_cache_alloc+0x1e5/0x2f0 ? do_init_module+0x1e/0x220 do_init_module+0x48/0x220 load_module+0x2602/0x2bc0 ? __kernel_read+0x145/0x2e0 ? kernel_read_file+0x229/0x290 __do_sys_finit_module+0xc5/0x130 ? __do_sys_finit_module+0xc5/0x130 __x64_sys_finit_module+0x13/0x20 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f64dda564dd Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 29 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdba393f88 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f64dda564dd RDX: 0000000000000000 RSI: 00005575399e2ab2 RDI: 0000000000000001 RBP: 000055753a91c5e0 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000001 R11: 0000000000000246 R12: 00005575399e2ab2 R13: 000055753a91ceb0 R14: 0000000000000000 R15: 000055753a923018 </TASK> Modules linked in: btintel(+) btmtk bluetooth vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm(+) snd_sof_pci_intel_tgl mac80211 snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence soundwire_bus snd_sof_intel_hda snd_sof_pci snd_sof snd_sof_xtensa_dsp snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core btrfs snd_compress snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec raid6_pq iwlwifi snd_hda_core snd_pcm snd_timer snd soundcore cfg80211 intel_ish_ipc(+) thunderbolt rfkill intel_ishtp ucsi_acpi wmi i2c_hid_acpi i2c_hid evdev CR2: 000000000000004f ---[ end trace 0000000000000000 ]--- Check the debugfs_dir pointer for an error before using it. [change to make both conditional]

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix double list_add when enabling VMD in scalable mode When enabling VMD and IOMMU scalable mode, the following kernel panic call trace/kernel log is shown in Eagle Stream platform (Sapphire Rapids CPU) during booting: pci 0000:59:00.5: Adding to iommu group 42 ... vmd 0000:59:00.5: PCI host bridge to bus 10000:80 pci 10000:80:01.0: [8086:352a] type 01 class 0x060400 pci 10000:80:01.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:01.0: enabling Extended Tags pci 10000:80:01.0: PME# supported from D0 D3hot D3cold pci 10000:80:01.0: DMAR: Setup RID2PASID failed pci 10000:80:01.0: Failed to add to iommu group 42: -16 pci 10000:80:03.0: [8086:352b] type 01 class 0x060400 pci 10000:80:03.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:03.0: enabling Extended Tags pci 10000:80:03.0: PME# supported from D0 D3hot D3cold ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:29! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.17.0-rc3+ #7 Hardware name: Lenovo ThinkSystem SR650V3/SB27A86647, BIOS ESE101Y-1.00 01/13/2022 Workqueue: events work_for_cpu_fn RIP: 0010:__list_add_valid.cold+0x26/0x3f Code: 9a 4a ab ff 4c 89 c1 48 c7 c7 40 0c d9 9e e8 b9 b1 fe ff 0f 0b 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 f0 0c d9 9e e8 a2 b1 fe ff <0f> 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 98 0c d9 9e e8 8b b1 fe RSP: 0000:ff5ad434865b3a40 EFLAGS: 00010246 RAX: 0000000000000058 RBX: ff4d61160b74b880 RCX: ff4d61255e1fffa8 RDX: 0000000000000000 RSI: 00000000fffeffff RDI: ffffffff9fd34f20 RBP: ff4d611d8e245c00 R08: 0000000000000000 R09: ff5ad434865b3888 R10: ff5ad434865b3880 R11: ff4d61257fdc6fe8 R12: ff4d61160b74b8a0 R13: ff4d61160b74b8a0 R14: ff4d611d8e245c10 R15: ff4d611d8001ba70 FS: 0000000000000000(0000) GS:ff4d611d5ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ff4d611fa1401000 CR3: 0000000aa0210001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> intel_pasid_alloc_table+0x9c/0x1d0 dmar_insert_one_dev_info+0x423/0x540 ? device_to_iommu+0x12d/0x2f0 intel_iommu_attach_device+0x116/0x290 __iommu_attach_device+0x1a/0x90 iommu_group_add_device+0x190/0x2c0 __iommu_probe_device+0x13e/0x250 iommu_probe_device+0x24/0x150 iommu_bus_notifier+0x69/0x90 blocking_notifier_call_chain+0x5a/0x80 device_add+0x3db/0x7b0 ? arch_memremap_can_ram_remap+0x19/0x50 ? memremap+0x75/0x140 pci_device_add+0x193/0x1d0 pci_scan_single_device+0xb9/0xf0 pci_scan_slot+0x4c/0x110 pci_scan_child_bus_extend+0x3a/0x290 vmd_enable_domain.constprop.0+0x63e/0x820 vmd_probe+0x163/0x190 local_pci_probe+0x42/0x80 work_for_cpu_fn+0x13/0x20 process_one_work+0x1e2/0x3b0 worker_thread+0x1c4/0x3a0 ? rescuer_thread+0x370/0x370 kthread+0xc7/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- ... Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The following 'lspci' output shows devices '10000:80:*' are subdevices of the VMD device 0000:59:00.5: $ lspci ... 0000:59:00.5 RAID bus controller: Intel Corporation Volume Management Device NVMe RAID Controller (rev 20) ... 10000:80:01.0 PCI bridge: Intel Corporation Device 352a (rev 03) 10000:80:03.0 PCI bridge: Intel Corporation Device 352b (rev 03) 10000:80:05.0 PCI bridge: Intel Corporation Device 352c (rev 03) 10000:80:07.0 PCI bridge: Intel Corporation Device 352d (rev 03) 10000:81:00.0 Non-Volatile memory controller: Intel Corporation NVMe Datacenter SSD [3DNAND, Beta Rock Controller] 10000:82:00 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix TZ_GET_TRIP NULL pointer dereference Do not call get_trip_hyst() from thermal_genl_cmd_tz_get_trip() if the thermal zone does not define one.

In the Linux kernel, the following vulnerability has been resolved: blktrace: fix use after free for struct blk_trace When tracing the whole disk, 'dropped' and 'msg' will be created under 'q->debugfs_dir' and 'bt->dir' is NULL, thus blk_trace_free() won't remove those files. What's worse, the following UAF can be triggered because of accessing stale 'dropped' and 'msg': ================================================================== BUG: KASAN: use-after-free in blk_dropped_read+0x89/0x100 Read of size 4 at addr ffff88816912f3d8 by task blktrace/1188 CPU: 27 PID: 1188 Comm: blktrace Not tainted 5.17.0-rc4-next-20220217+ #469 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-4 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_address_description.constprop.0.cold+0xab/0x381 ? blk_dropped_read+0x89/0x100 ? blk_dropped_read+0x89/0x100 kasan_report.cold+0x83/0xdf ? blk_dropped_read+0x89/0x100 kasan_check_range+0x140/0x1b0 blk_dropped_read+0x89/0x100 ? blk_create_buf_file_callback+0x20/0x20 ? kmem_cache_free+0xa1/0x500 ? do_sys_openat2+0x258/0x460 full_proxy_read+0x8f/0xc0 vfs_read+0xc6/0x260 ksys_read+0xb9/0x150 ? vfs_write+0x3d0/0x3d0 ? fpregs_assert_state_consistent+0x55/0x60 ? exit_to_user_mode_prepare+0x39/0x1e0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fbc080d92fd Code: ce 20 00 00 75 10 b8 00 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 1 RSP: 002b:00007fbb95ff9cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007fbb95ff9dc0 RCX: 00007fbc080d92fd RDX: 0000000000000100 RSI: 00007fbb95ff9cc0 RDI: 0000000000000045 RBP: 0000000000000045 R08: 0000000000406299 R09: 00000000fffffffd R10: 000000000153afa0 R11: 0000000000000293 R12: 00007fbb780008c0 R13: 00007fbb78000938 R14: 0000000000608b30 R15: 00007fbb780029c8 </TASK> Allocated by task 1050: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 do_blk_trace_setup+0xcb/0x410 __blk_trace_setup+0xac/0x130 blk_trace_ioctl+0xe9/0x1c0 blkdev_ioctl+0xf1/0x390 __x64_sys_ioctl+0xa5/0xe0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 1050: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x103/0x180 kfree+0x9a/0x4c0 __blk_trace_remove+0x53/0x70 blk_trace_ioctl+0x199/0x1c0 blkdev_common_ioctl+0x5e9/0xb30 blkdev_ioctl+0x1a5/0x390 __x64_sys_ioctl+0xa5/0xe0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88816912f380 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 88 bytes inside of 96-byte region [ffff88816912f380, ffff88816912f3e0) The buggy address belongs to the page: page:000000009a1b4e7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0f flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0000200 ffffea00044f1100 dead000000000002 ffff88810004c780 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88816912f280: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff88816912f300: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc >ffff88816912f380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff88816912f400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff88816912f480: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ==================================================================

In the Linux kernel, the following vulnerability has been resolved: netfilter: fix use-after-free in __nf_register_net_hook() We must not dereference @new_hooks after nf_hook_mutex has been released, because other threads might have freed our allocated hooks already. BUG: KASAN: use-after-free in nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline] BUG: KASAN: use-after-free in hooks_validate net/netfilter/core.c:171 [inline] BUG: KASAN: use-after-free in __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438 Read of size 2 at addr ffff88801c1a8000 by task syz-executor237/4430 CPU: 1 PID: 4430 Comm: syz-executor237 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline] hooks_validate net/netfilter/core.c:171 [inline] __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline] find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline] do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101 ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1024 rawv6_setsockopt+0xd3/0x6a0 net/ipv6/raw.c:1084 __sys_setsockopt+0x2db/0x610 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f65a1ace7d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 71 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f65a1a7f308 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f65a1ace7d9 RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 RBP: 00007f65a1b574c8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000020000000 R11: 0000000000000246 R12: 00007f65a1b55130 R13: 00007f65a1b574c0 R14: 00007f65a1b24090 R15: 0000000000022000 </TASK> The buggy address belongs to the page: page:ffffea0000706a00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c1a8 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000000 ffffea0001c1b108 ffffea000046dd08 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 2, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 4430, ts 1061781545818, free_ts 1061791488993 prep_new_page mm/page_alloc.c:2434 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389 __alloc_pages_node include/linux/gfp.h:572 [inline] alloc_pages_node include/linux/gfp.h:595 [inline] kmalloc_large_node+0x62/0x130 mm/slub.c:4438 __kmalloc_node+0x35a/0x4a0 mm/slub. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: fix possible use-after-free Eric Dumazet says: The sock_hold() side seems suspect, because there is no guarantee that sk_refcnt is not already 0. On failure, we cannot queue the packet and need to indicate an error. The packet will be dropped by the caller. v2: split skb prefetch hunk into separate change

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ensure we call ipv6_mc_down() at most once There are two reasons for addrconf_notify() to be called with NETDEV_DOWN: either the network device is actually going down, or IPv6 was disabled on the interface. If either of them stays down while the other is toggled, we repeatedly call the code for NETDEV_DOWN, including ipv6_mc_down(), while never calling the corresponding ipv6_mc_up() in between. This will cause a new entry in idev->mc_tomb to be allocated for each multicast group the interface is subscribed to, which in turn leaks one struct ifmcaddr6 per nontrivial multicast group the interface is subscribed to. The following reproducer will leak at least $n objects: ip addr add ff2e::4242/32 dev eth0 autojoin sysctl -w net.ipv6.conf.eth0.disable_ipv6=1 for i in $(seq 1 $n); do ip link set up eth0; ip link set down eth0 done Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2) can also be used to create a nontrivial idev->mc_list, which will the leak objects with the right up-down-sequence. Based on both sources for NETDEV_DOWN events the interface IPv6 state should be considered: - not ready if the network interface is not ready OR IPv6 is disabled for it - ready if the network interface is ready AND IPv6 is enabled for it The functions ipv6_mc_up() and ipv6_down() should only be run when this state changes. Implement this by remembering when the IPv6 state is ready, and only run ipv6_mc_down() if it actually changed from ready to not ready. The other direction (not ready -> ready) already works correctly, as: - the interface notification triggered codepath for NETDEV_UP / NETDEV_CHANGE returns early if ipv6 is disabled, and - the disable_ipv6=0 triggered codepath skips fully initializing the interface as long as addrconf_link_ready(dev) returns false - calling ipv6_mc_up() repeatedly does not leak anything

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix connection leak There's a potential leak issue under following execution sequence : smc_release smc_connect_work if (sk->sk_state == SMC_INIT) send_clc_confirim tcp_abort(); ... sk.sk_state = SMC_ACTIVE smc_close_active switch(sk->sk_state) { ... case SMC_ACTIVE: smc_close_final() // then wait peer closed Unfortunately, tcp_abort() may discard CLC CONFIRM messages that are still in the tcp send buffer, in which case our connection token cannot be delivered to the server side, which means that we cannot get a passive close message at all. Therefore, it is impossible for the to be disconnected at all. This patch tries a very simple way to avoid this issue, once the state has changed to SMC_ACTIVE after tcp_abort(), we can actively abort the smc connection, considering that the state is SMC_INIT before tcp_abort(), abandoning the complete disconnection process should not cause too much problem. In fact, this problem may exist as long as the CLC CONFIRM message is not received by the server. Whether a timer should be added after smc_close_final() needs to be discussed in the future. But even so, this patch provides a faster release for connection in above case, it should also be valuable.

In the Linux kernel, the following vulnerability has been resolved: net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe() During driver initialization, the pointer of card info, i.e. the variable 'ci' is required. However, the definition of 'com20020pci_id_table' reveals that this field is empty for some devices, which will cause null pointer dereference when initializing these devices. The following log reveals it: [ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci] [ 3.975181] Call Trace: [ 3.976208] local_pci_probe+0x13f/0x210 [ 3.977248] pci_device_probe+0x34c/0x6d0 [ 3.977255] ? pci_uevent+0x470/0x470 [ 3.978265] really_probe+0x24c/0x8d0 [ 3.978273] __driver_probe_device+0x1b3/0x280 [ 3.979288] driver_probe_device+0x50/0x370 Fix this by checking whether the 'ci' is a null pointer first.