In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix double list_add when enabling VMD in scalable mode When enabling VMD and IOMMU scalable mode, the following kernel panic call trace/kernel log is shown in Eagle Stream platform (Sapphire Rapids CPU) during booting: pci 0000:59:00.5: Adding to iommu group 42 ... vmd 0000:59:00.5: PCI host bridge to bus 10000:80 pci 10000:80:01.0: [8086:352a] type 01 class 0x060400 pci 10000:80:01.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:01.0: enabling Extended Tags pci 10000:80:01.0: PME# supported from D0 D3hot D3cold pci 10000:80:01.0: DMAR: Setup RID2PASID failed pci 10000:80:01.0: Failed to add to iommu group 42: -16 pci 10000:80:03.0: [8086:352b] type 01 class 0x060400 pci 10000:80:03.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:03.0: enabling Extended Tags pci 10000:80:03.0: PME# supported from D0 D3hot D3cold ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:29! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.17.0-rc3+ #7 Hardware name: Lenovo ThinkSystem SR650V3/SB27A86647, BIOS ESE101Y-1.00 01/13/2022 Workqueue: events work_for_cpu_fn RIP: 0010:__list_add_valid.cold+0x26/0x3f Code: 9a 4a ab ff 4c 89 c1 48 c7 c7 40 0c d9 9e e8 b9 b1 fe ff 0f 0b 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 f0 0c d9 9e e8 a2 b1 fe ff <0f> 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 98 0c d9 9e e8 8b b1 fe RSP: 0000:ff5ad434865b3a40 EFLAGS: 00010246 RAX: 0000000000000058 RBX: ff4d61160b74b880 RCX: ff4d61255e1fffa8 RDX: 0000000000000000 RSI: 00000000fffeffff RDI: ffffffff9fd34f20 RBP: ff4d611d8e245c00 R08: 0000000000000000 R09: ff5ad434865b3888 R10: ff5ad434865b3880 R11: ff4d61257fdc6fe8 R12: ff4d61160b74b8a0 R13: ff4d61160b74b8a0 R14: ff4d611d8e245c10 R15: ff4d611d8001ba70 FS: 0000000000000000(0000) GS:ff4d611d5ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ff4d611fa1401000 CR3: 0000000aa0210001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> intel_pasid_alloc_table+0x9c/0x1d0 dmar_insert_one_dev_info+0x423/0x540 ? device_to_iommu+0x12d/0x2f0 intel_iommu_attach_device+0x116/0x290 __iommu_attach_device+0x1a/0x90 iommu_group_add_device+0x190/0x2c0 __iommu_probe_device+0x13e/0x250 iommu_probe_device+0x24/0x150 iommu_bus_notifier+0x69/0x90 blocking_notifier_call_chain+0x5a/0x80 device_add+0x3db/0x7b0 ? arch_memremap_can_ram_remap+0x19/0x50 ? memremap+0x75/0x140 pci_device_add+0x193/0x1d0 pci_scan_single_device+0xb9/0xf0 pci_scan_slot+0x4c/0x110 pci_scan_child_bus_extend+0x3a/0x290 vmd_enable_domain.constprop.0+0x63e/0x820 vmd_probe+0x163/0x190 local_pci_probe+0x42/0x80 work_for_cpu_fn+0x13/0x20 process_one_work+0x1e2/0x3b0 worker_thread+0x1c4/0x3a0 ? rescuer_thread+0x370/0x370 kthread+0xc7/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- ... Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The following 'lspci' output shows devices '10000:80:*' are subdevices of the VMD device 0000:59:00.5: $ lspci ... 0000:59:00.5 RAID bus controller: Intel Corporation Volume Management Device NVMe RAID Controller (rev 20) ... 10000:80:01.0 PCI bridge: Intel Corporation Device 352a (rev 03) 10000:80:03.0 PCI bridge: Intel Corporation Device 352b (rev 03) 10000:80:05.0 PCI bridge: Intel Corporation Device 352c (rev 03) 10000:80:07.0 PCI bridge: Intel Corporation Device 352d (rev 03) 10000:81:00.0 Non-Volatile memory controller: Intel Corporation NVMe Datacenter SSD [3DNAND, Beta Rock Controller] 10000:82:00 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix TZ_GET_TRIP NULL pointer dereference Do not call get_trip_hyst() from thermal_genl_cmd_tz_get_trip() if the thermal zone does not define one.

In the Linux kernel, the following vulnerability has been resolved: xen/netfront: destroy queues before real_num_tx_queues is zeroed xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to delete queues. Since d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ("net-sysfs: update the queue counts in the unregistration path"), unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two facts together means, that xennet_destroy_queues() called from xennet_remove() cannot do its job, because it's called after unregister_netdev(). This results in kfree-ing queues that are still linked in napi, which ultimately crashes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ #226 RIP: 0010:free_netdev+0xa3/0x1a0 Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00 RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050 R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0 Call Trace: <TASK> xennet_remove+0x13d/0x300 [xen_netfront] xenbus_dev_remove+0x6d/0xf0 __device_release_driver+0x17a/0x240 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18b/0x410 ? _raw_spin_unlock+0x16/0x30 ? klist_iter_exit+0x14/0x20 ? xenbus_dev_request_and_reply+0x80/0x80 device_unregister+0x13/0x60 xenbus_dev_changed+0x18e/0x1f0 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Fix this by calling xennet_destroy_queues() from xennet_uninit(), when real_num_tx_queues is still available. This ensures that queues are destroyed when real_num_tx_queues is set to 0, regardless of how unregister_netdev() was called. Originally reported at https://github.com/QubesOS/qubes-issues/issues/7257

In the Linux kernel, the following vulnerability has been resolved: blktrace: fix use after free for struct blk_trace When tracing the whole disk, 'dropped' and 'msg' will be created under 'q->debugfs_dir' and 'bt->dir' is NULL, thus blk_trace_free() won't remove those files. What's worse, the following UAF can be triggered because of accessing stale 'dropped' and 'msg': ================================================================== BUG: KASAN: use-after-free in blk_dropped_read+0x89/0x100 Read of size 4 at addr ffff88816912f3d8 by task blktrace/1188 CPU: 27 PID: 1188 Comm: blktrace Not tainted 5.17.0-rc4-next-20220217+ #469 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-4 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_address_description.constprop.0.cold+0xab/0x381 ? blk_dropped_read+0x89/0x100 ? blk_dropped_read+0x89/0x100 kasan_report.cold+0x83/0xdf ? blk_dropped_read+0x89/0x100 kasan_check_range+0x140/0x1b0 blk_dropped_read+0x89/0x100 ? blk_create_buf_file_callback+0x20/0x20 ? kmem_cache_free+0xa1/0x500 ? do_sys_openat2+0x258/0x460 full_proxy_read+0x8f/0xc0 vfs_read+0xc6/0x260 ksys_read+0xb9/0x150 ? vfs_write+0x3d0/0x3d0 ? fpregs_assert_state_consistent+0x55/0x60 ? exit_to_user_mode_prepare+0x39/0x1e0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fbc080d92fd Code: ce 20 00 00 75 10 b8 00 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 1 RSP: 002b:00007fbb95ff9cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007fbb95ff9dc0 RCX: 00007fbc080d92fd RDX: 0000000000000100 RSI: 00007fbb95ff9cc0 RDI: 0000000000000045 RBP: 0000000000000045 R08: 0000000000406299 R09: 00000000fffffffd R10: 000000000153afa0 R11: 0000000000000293 R12: 00007fbb780008c0 R13: 00007fbb78000938 R14: 0000000000608b30 R15: 00007fbb780029c8 </TASK> Allocated by task 1050: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 do_blk_trace_setup+0xcb/0x410 __blk_trace_setup+0xac/0x130 blk_trace_ioctl+0xe9/0x1c0 blkdev_ioctl+0xf1/0x390 __x64_sys_ioctl+0xa5/0xe0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 1050: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x103/0x180 kfree+0x9a/0x4c0 __blk_trace_remove+0x53/0x70 blk_trace_ioctl+0x199/0x1c0 blkdev_common_ioctl+0x5e9/0xb30 blkdev_ioctl+0x1a5/0x390 __x64_sys_ioctl+0xa5/0xe0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88816912f380 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 88 bytes inside of 96-byte region [ffff88816912f380, ffff88816912f3e0) The buggy address belongs to the page: page:000000009a1b4e7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0f flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0000200 ffffea00044f1100 dead000000000002 ffff88810004c780 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88816912f280: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff88816912f300: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc >ffff88816912f380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff88816912f400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff88816912f480: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ==================================================================

In the Linux kernel, the following vulnerability has been resolved: netfilter: fix use-after-free in __nf_register_net_hook() We must not dereference @new_hooks after nf_hook_mutex has been released, because other threads might have freed our allocated hooks already. BUG: KASAN: use-after-free in nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline] BUG: KASAN: use-after-free in hooks_validate net/netfilter/core.c:171 [inline] BUG: KASAN: use-after-free in __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438 Read of size 2 at addr ffff88801c1a8000 by task syz-executor237/4430 CPU: 1 PID: 4430 Comm: syz-executor237 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline] hooks_validate net/netfilter/core.c:171 [inline] __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline] find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline] do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101 ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1024 rawv6_setsockopt+0xd3/0x6a0 net/ipv6/raw.c:1084 __sys_setsockopt+0x2db/0x610 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f65a1ace7d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 71 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f65a1a7f308 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f65a1ace7d9 RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 RBP: 00007f65a1b574c8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000020000000 R11: 0000000000000246 R12: 00007f65a1b55130 R13: 00007f65a1b574c0 R14: 00007f65a1b24090 R15: 0000000000022000 </TASK> The buggy address belongs to the page: page:ffffea0000706a00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c1a8 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000000 ffffea0001c1b108 ffffea000046dd08 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 2, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 4430, ts 1061781545818, free_ts 1061791488993 prep_new_page mm/page_alloc.c:2434 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389 __alloc_pages_node include/linux/gfp.h:572 [inline] alloc_pages_node include/linux/gfp.h:595 [inline] kmalloc_large_node+0x62/0x130 mm/slub.c:4438 __kmalloc_node+0x35a/0x4a0 mm/slub. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: fix possible use-after-free Eric Dumazet says: The sock_hold() side seems suspect, because there is no guarantee that sk_refcnt is not already 0. On failure, we cannot queue the packet and need to indicate an error. The packet will be dropped by the caller. v2: split skb prefetch hunk into separate change

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ensure we call ipv6_mc_down() at most once There are two reasons for addrconf_notify() to be called with NETDEV_DOWN: either the network device is actually going down, or IPv6 was disabled on the interface. If either of them stays down while the other is toggled, we repeatedly call the code for NETDEV_DOWN, including ipv6_mc_down(), while never calling the corresponding ipv6_mc_up() in between. This will cause a new entry in idev->mc_tomb to be allocated for each multicast group the interface is subscribed to, which in turn leaks one struct ifmcaddr6 per nontrivial multicast group the interface is subscribed to. The following reproducer will leak at least $n objects: ip addr add ff2e::4242/32 dev eth0 autojoin sysctl -w net.ipv6.conf.eth0.disable_ipv6=1 for i in $(seq 1 $n); do ip link set up eth0; ip link set down eth0 done Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2) can also be used to create a nontrivial idev->mc_list, which will the leak objects with the right up-down-sequence. Based on both sources for NETDEV_DOWN events the interface IPv6 state should be considered: - not ready if the network interface is not ready OR IPv6 is disabled for it - ready if the network interface is ready AND IPv6 is enabled for it The functions ipv6_mc_up() and ipv6_down() should only be run when this state changes. Implement this by remembering when the IPv6 state is ready, and only run ipv6_mc_down() if it actually changed from ready to not ready. The other direction (not ready -> ready) already works correctly, as: - the interface notification triggered codepath for NETDEV_UP / NETDEV_CHANGE returns early if ipv6 is disabled, and - the disable_ipv6=0 triggered codepath skips fully initializing the interface as long as addrconf_link_ready(dev) returns false - calling ipv6_mc_up() repeatedly does not leak anything

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix connection leak There's a potential leak issue under following execution sequence : smc_release smc_connect_work if (sk->sk_state == SMC_INIT) send_clc_confirim tcp_abort(); ... sk.sk_state = SMC_ACTIVE smc_close_active switch(sk->sk_state) { ... case SMC_ACTIVE: smc_close_final() // then wait peer closed Unfortunately, tcp_abort() may discard CLC CONFIRM messages that are still in the tcp send buffer, in which case our connection token cannot be delivered to the server side, which means that we cannot get a passive close message at all. Therefore, it is impossible for the to be disconnected at all. This patch tries a very simple way to avoid this issue, once the state has changed to SMC_ACTIVE after tcp_abort(), we can actively abort the smc connection, considering that the state is SMC_INIT before tcp_abort(), abandoning the complete disconnection process should not cause too much problem. In fact, this problem may exist as long as the CLC CONFIRM message is not received by the server. Whether a timer should be added after smc_close_final() needs to be discussed in the future. But even so, this patch provides a faster release for connection in above case, it should also be valuable.

In the Linux kernel, the following vulnerability has been resolved: net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe() During driver initialization, the pointer of card info, i.e. the variable 'ci' is required. However, the definition of 'com20020pci_id_table' reveals that this field is empty for some devices, which will cause null pointer dereference when initializing these devices. The following log reveals it: [ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci] [ 3.975181] Call Trace: [ 3.976208] local_pci_probe+0x13f/0x210 [ 3.977248] pci_device_probe+0x34c/0x6d0 [ 3.977255] ? pci_uevent+0x470/0x470 [ 3.978265] really_probe+0x24c/0x8d0 [ 3.978273] __driver_probe_device+0x1b3/0x280 [ 3.979288] driver_probe_device+0x50/0x370 Fix this by checking whether the 'ci' is a null pointer first.

In the Linux kernel, the following vulnerability has been resolved: auxdisplay: lcd2s: Fix memory leak in ->remove() Once allocated the struct lcd2s_data is never freed. Fix the memory leak by switching to devm_kzalloc().

In the Linux kernel, the following vulnerability has been resolved: mptcp: Correctly set DATA_FIN timeout when number of retransmits is large Syzkaller with UBSAN uncovered a scenario where a large number of DATA_FIN retransmits caused a shift-out-of-bounds in the DATA_FIN timeout calculation: ================================================================================ UBSAN: shift-out-of-bounds in net/mptcp/protocol.c:470:29 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 1 PID: 13059 Comm: kworker/1:0 Not tainted 5.17.0-rc2-00630-g5fbf21c90c60 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e lib/ubsan.c:330 mptcp_set_datafin_timeout net/mptcp/protocol.c:470 [inline] __mptcp_retrans.cold+0x72/0x77 net/mptcp/protocol.c:2445 mptcp_worker+0x58a/0xa70 net/mptcp/protocol.c:2528 process_one_work+0x9df/0x16d0 kernel/workqueue.c:2307 worker_thread+0x95/0xe10 kernel/workqueue.c:2454 kthread+0x2f4/0x3b0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================================ This change limits the maximum timeout by limiting the size of the shift, which keeps all intermediate values in-bounds.

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: free reset-work-item when flushing Fix a tiny memory leak when flushing the reset work queue.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix I/O page table memory leak The current logic updates the I/O page table mode for the domain before calling the logic to free memory used for the page table. This results in IOMMU page table memory leak, and can be observed when launching VM w/ pass-through devices. Fix by freeing the memory used for page table before updating the mode.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix relocation crash due to premature return from btrfs_commit_transaction() We are seeing crashes similar to the following trace: [38.969182] WARNING: CPU: 20 PID: 2105 at fs/btrfs/relocation.c:4070 btrfs_relocate_block_group+0x2dc/0x340 [btrfs] [38.973556] CPU: 20 PID: 2105 Comm: btrfs Not tainted 5.17.0-rc4 #54 [38.974580] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [38.976539] RIP: 0010:btrfs_relocate_block_group+0x2dc/0x340 [btrfs] [38.980336] RSP: 0000:ffffb0dd42e03c20 EFLAGS: 00010206 [38.981218] RAX: ffff96cfc4ede800 RBX: ffff96cfc3ce0000 RCX: 000000000002ca14 [38.982560] RDX: 0000000000000000 RSI: 4cfd109a0bcb5d7f RDI: ffff96cfc3ce0360 [38.983619] RBP: ffff96cfc309c000 R08: 0000000000000000 R09: 0000000000000000 [38.984678] R10: ffff96cec0000001 R11: ffffe84c80000000 R12: ffff96cfc4ede800 [38.985735] R13: 0000000000000000 R14: 0000000000000000 R15: ffff96cfc3ce0360 [38.987146] FS: 00007f11c15218c0(0000) GS:ffff96d6dfb00000(0000) knlGS:0000000000000000 [38.988662] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [38.989398] CR2: 00007ffc922c8e60 CR3: 00000001147a6001 CR4: 0000000000370ee0 [38.990279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [38.991219] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [38.992528] Call Trace: [38.992854] <TASK> [38.993148] btrfs_relocate_chunk+0x27/0xe0 [btrfs] [38.993941] btrfs_balance+0x78e/0xea0 [btrfs] [38.994801] ? vsnprintf+0x33c/0x520 [38.995368] ? __kmalloc_track_caller+0x351/0x440 [38.996198] btrfs_ioctl_balance+0x2b9/0x3a0 [btrfs] [38.997084] btrfs_ioctl+0x11b0/0x2da0 [btrfs] [38.997867] ? mod_objcg_state+0xee/0x340 [38.998552] ? seq_release+0x24/0x30 [38.999184] ? proc_nr_files+0x30/0x30 [38.999654] ? call_rcu+0xc8/0x2f0 [39.000228] ? __x64_sys_ioctl+0x84/0xc0 [39.000872] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [39.001973] __x64_sys_ioctl+0x84/0xc0 [39.002566] do_syscall_64+0x3a/0x80 [39.003011] entry_SYSCALL_64_after_hwframe+0x44/0xae [39.003735] RIP: 0033:0x7f11c166959b [39.007324] RSP: 002b:00007fff2543e998 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [39.008521] RAX: ffffffffffffffda RBX: 00007f11c1521698 RCX: 00007f11c166959b [39.009833] RDX: 00007fff2543ea40 RSI: 00000000c4009420 RDI: 0000000000000003 [39.011270] RBP: 0000000000000003 R08: 0000000000000013 R09: 00007f11c16f94e0 [39.012581] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff25440df3 [39.014046] R13: 0000000000000000 R14: 00007fff2543ea40 R15: 0000000000000001 [39.015040] </TASK> [39.015418] ---[ end trace 0000000000000000 ]--- [43.131559] ------------[ cut here ]------------ [43.132234] kernel BUG at fs/btrfs/extent-tree.c:2717! [43.133031] invalid opcode: 0000 [#1] PREEMPT SMP PTI [43.133702] CPU: 1 PID: 1839 Comm: btrfs Tainted: G W 5.17.0-rc4 #54 [43.134863] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [43.136426] RIP: 0010:unpin_extent_range+0x37a/0x4f0 [btrfs] [43.139913] RSP: 0000:ffffb0dd4216bc70 EFLAGS: 00010246 [43.140629] RAX: 0000000000000000 RBX: ffff96cfc34490f8 RCX: 0000000000000001 [43.141604] RDX: 0000000080000001 RSI: 0000000051d00000 RDI: 00000000ffffffff [43.142645] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff96cfd07dca50 [43.143669] R10: ffff96cfc46e8a00 R11: fffffffffffec000 R12: 0000000041d00000 [43.144657] R13: ffff96cfc3ce0000 R14: ffffb0dd4216bd08 R15: 0000000000000000 [43.145686] FS: 00007f7657dd68c0(0000) GS:ffff96d6df640000(0000) knlGS:0000000000000000 [43.146808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [43.147584] CR2: 00007f7fe81bf5b0 CR3: 00000001093ee004 CR4: 0000000000370ee0 [43.148589] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [43.149581] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not WARN_ON() if we have PageError set Whenever we do any extent buffer operations we call assert_eb_page_uptodate() to complain loudly if we're operating on an non-uptodate page. Our overnight tests caught this warning earlier this week WARNING: CPU: 1 PID: 553508 at fs/btrfs/extent_io.c:6849 assert_eb_page_uptodate+0x3f/0x50 CPU: 1 PID: 553508 Comm: kworker/u4:13 Tainted: G W 5.17.0-rc3+ #564 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: btrfs-cache btrfs_work_helper RIP: 0010:assert_eb_page_uptodate+0x3f/0x50 RSP: 0018:ffffa961440a7c68 EFLAGS: 00010246 RAX: 0017ffffc0002112 RBX: ffffe6e74453f9c0 RCX: 0000000000001000 RDX: ffffe6e74467c887 RSI: ffffe6e74453f9c0 RDI: ffff8d4c5efc2fc0 RBP: 0000000000000d56 R08: ffff8d4d4a224000 R09: 0000000000000000 R10: 00015817fa9d1ef0 R11: 000000000000000c R12: 00000000000007b1 R13: ffff8d4c5efc2fc0 R14: 0000000001500000 R15: 0000000001cb1000 FS: 0000000000000000(0000) GS:ffff8d4dbbd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff31d3448d8 CR3: 0000000118be8004 CR4: 0000000000370ee0 Call Trace: extent_buffer_test_bit+0x3f/0x70 free_space_test_bit+0xa6/0xc0 load_free_space_tree+0x1f6/0x470 caching_thread+0x454/0x630 ? rcu_read_lock_sched_held+0x12/0x60 ? rcu_read_lock_sched_held+0x12/0x60 ? rcu_read_lock_sched_held+0x12/0x60 ? lock_release+0x1f0/0x2d0 btrfs_work_helper+0xf2/0x3e0 ? lock_release+0x1f0/0x2d0 ? finish_task_switch.isra.0+0xf9/0x3a0 process_one_work+0x26d/0x580 ? process_one_work+0x580/0x580 worker_thread+0x55/0x3b0 ? process_one_work+0x580/0x580 kthread+0xf0/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 This was partially fixed by c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it"), however all that fix did was keep us from finding extent buffers after a failed writeout. It didn't keep us from continuing to use a buffer that we already had found. In this case we're searching the commit root to cache the block group, so we can start committing the transaction and switch the commit root and then start writing. After the switch we can look up an extent buffer that hasn't been written yet and start processing that block group. Then we fail to write that block out and clear Uptodate on the page, and then we start spewing these errors. Normally we're protected by the tree lock to a certain degree here. If we read a block we have that block read locked, and we block the writer from locking the block before we submit it for the write. However this isn't necessarily fool proof because the read could happen before we do the submit_bio and after we locked and unlocked the extent buffer. Also in this particular case we have path->skip_locking set, so that won't save us here. We'll simply get a block that was valid when we read it, but became invalid while we were using it. What we really want is to catch the case where we've "read" a block but it's not marked Uptodate. On read we ClearPageError(), so if we're !Uptodate and !Error we know we didn't do the right thing for reading the page. Fix this by checking !Uptodate && !Error, this way we will not complain if our buffer gets invalidated while we're using it, and we'll maintain the spirit of the check which is to make sure we have a fully in-cache block while we're messing with it.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not start relocation until in progress drops are done We hit a bug with a recovering relocation on mount for one of our file systems in production. I reproduced this locally by injecting errors into snapshot delete with balance running at the same time. This presented as an error while looking up an extent item WARNING: CPU: 5 PID: 1501 at fs/btrfs/extent-tree.c:866 lookup_inline_extent_backref+0x647/0x680 CPU: 5 PID: 1501 Comm: btrfs-balance Not tainted 5.16.0-rc8+ #8 RIP: 0010:lookup_inline_extent_backref+0x647/0x680 RSP: 0018:ffffae0a023ab960 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000000000 RBP: ffff943fd2a39b60 R08: 0000000000000000 R09: 0000000000000001 R10: 0001434088152de0 R11: 0000000000000000 R12: 0000000001d05000 R13: ffff943fd2a39b60 R14: ffff943fdb96f2a0 R15: ffff9442fc923000 FS: 0000000000000000(0000) GS:ffff944e9eb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1157b1fca8 CR3: 000000010f092000 CR4: 0000000000350ee0 Call Trace: <TASK> insert_inline_extent_backref+0x46/0xd0 __btrfs_inc_extent_ref.isra.0+0x5f/0x200 ? btrfs_merge_delayed_refs+0x164/0x190 __btrfs_run_delayed_refs+0x561/0xfa0 ? btrfs_search_slot+0x7b4/0xb30 ? btrfs_update_root+0x1a9/0x2c0 btrfs_run_delayed_refs+0x73/0x1f0 ? btrfs_update_root+0x1a9/0x2c0 btrfs_commit_transaction+0x50/0xa50 ? btrfs_update_reloc_root+0x122/0x220 prepare_to_merge+0x29f/0x320 relocate_block_group+0x2b8/0x550 btrfs_relocate_block_group+0x1a6/0x350 btrfs_relocate_chunk+0x27/0xe0 btrfs_balance+0x777/0xe60 balance_kthread+0x35/0x50 ? btrfs_balance+0xe60/0xe60 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Normally snapshot deletion and relocation are excluded from running at the same time by the fs_info->cleaner_mutex. However if we had a pending balance waiting to get the ->cleaner_mutex, and a snapshot deletion was running, and then the box crashed, we would come up in a state where we have a half deleted snapshot. Again, in the normal case the snapshot deletion needs to complete before relocation can start, but in this case relocation could very well start before the snapshot deletion completes, as we simply add the root to the dead roots list and wait for the next time the cleaner runs to clean up the snapshot. Fix this by setting a bit on the fs_info if we have any DEAD_ROOT's that had a pending drop_progress key. If they do then we know we were in the middle of the drop operation and set a flag on the fs_info. Then balance can wait until this flag is cleared to start up again. If there are DEAD_ROOT's that don't have a drop_progress set then we're safe to start balance right away as we'll be properly protected by the cleaner_mutex.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op() In zynq_qspi_exec_mem_op(), kzalloc() is directly used in memset(), which could lead to a NULL pointer dereference on failure of kzalloc(). Fix this bug by adding a check of tmpbuf. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_SPI_ZYNQ_QSPI=m show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential context UAFs gem_context_register() makes the context visible to userspace, and which point a separate thread can trigger the I915_GEM_CONTEXT_DESTROY ioctl. So we need to ensure that nothing uses the ctx ptr after this. And we need to ensure that adding the ctx to the xarray is the *last* thing that gem_context_register() does with the ctx pointer. [tursulin: Stable and fixes tags add/tidy.] (cherry picked from commit bed4b455cf5374e68879be56971c1da563bcd90c)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fixed bug on error when unloading amdgpu Fixed bug on error when unloading amdgpu. The error message is as follows: [ 377.706202] kernel BUG at drivers/gpu/drm/drm_buddy.c:278! [ 377.706215] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 377.706222] CPU: 4 PID: 8610 Comm: modprobe Tainted: G IOE 6.0.0-thomas #1 [ 377.706231] Hardware name: ASUS System Product Name/PRIME Z390-A, BIOS 2004 11/02/2021 [ 377.706238] RIP: 0010:drm_buddy_free_block+0x26/0x30 [drm_buddy] [ 377.706264] Code: 00 00 00 90 0f 1f 44 00 00 48 8b 0e 89 c8 25 00 0c 00 00 3d 00 04 00 00 75 10 48 8b 47 18 48 d3 e0 48 01 47 28 e9 fa fe ff ff <0f> 0b 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 55 48 89 f5 53 [ 377.706282] RSP: 0018:ffffad2dc4683cb8 EFLAGS: 00010287 [ 377.706289] RAX: 0000000000000000 RBX: ffff8b1743bd5138 RCX: 0000000000000000 [ 377.706297] RDX: ffff8b1743bd5160 RSI: ffff8b1743bd5c78 RDI: ffff8b16d1b25f70 [ 377.706304] RBP: ffff8b1743bd59e0 R08: 0000000000000001 R09: 0000000000000001 [ 377.706311] R10: ffff8b16c8572400 R11: ffffad2dc4683cf0 R12: ffff8b16d1b25f70 [ 377.706318] R13: ffff8b16d1b25fd0 R14: ffff8b1743bd59c0 R15: ffff8b16d1b25f70 [ 377.706325] FS: 00007fec56c72c40(0000) GS:ffff8b1836500000(0000) knlGS:0000000000000000 [ 377.706334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 377.706340] CR2: 00007f9b88c1ba50 CR3: 0000000110450004 CR4: 00000000003706e0 [ 377.706347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 377.706354] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 377.706361] Call Trace: [ 377.706365] <TASK> [ 377.706369] drm_buddy_free_list+0x2a/0x60 [drm_buddy] [ 377.706376] amdgpu_vram_mgr_fini+0xea/0x180 [amdgpu] [ 377.706572] amdgpu_ttm_fini+0x12e/0x1a0 [amdgpu] [ 377.706650] amdgpu_bo_fini+0x22/0x90 [amdgpu] [ 377.706727] gmc_v11_0_sw_fini+0x26/0x30 [amdgpu] [ 377.706821] amdgpu_device_fini_sw+0xa1/0x3c0 [amdgpu] [ 377.706897] amdgpu_driver_release_kms+0x12/0x30 [amdgpu] [ 377.706975] drm_dev_release+0x20/0x40 [drm] [ 377.707006] release_nodes+0x35/0xb0 [ 377.707014] devres_release_all+0x8b/0xc0 [ 377.707020] device_unbind_cleanup+0xe/0x70 [ 377.707027] device_release_driver_internal+0xee/0x160 [ 377.707033] driver_detach+0x44/0x90 [ 377.707039] bus_remove_driver+0x55/0xe0 [ 377.707045] pci_unregister_driver+0x3b/0x90 [ 377.707052] amdgpu_exit+0x11/0x6c [amdgpu] [ 377.707194] __x64_sys_delete_module+0x142/0x2b0 [ 377.707201] ? fpregs_assert_state_consistent+0x22/0x50 [ 377.707208] ? exit_to_user_mode_prepare+0x3e/0x190 [ 377.707215] do_syscall_64+0x38/0x90 [ 377.707221] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: iommu/iova: Fix alloc iova overflows issue In __alloc_and_insert_iova_range, there is an issue that retry_pfn overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will overflow. As a result, if the retry logic is executed, low_pfn is updated to 0, and then new_pfn < low_pfn returns false to make the allocation successful. This issue occurs in the following two situations: 1. The first iova size exceeds the domain size. When initializing iova domain, iovad->cached_node is assigned as iovad->anchor. For example, the iova domain size is 10M, start_pfn is 0x1_F000_0000, and the iova size allocated for the first time is 11M. The following is the log information, new->pfn_lo is smaller than iovad->cached_node. Example log as follows: [ 223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00 [ 223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff 2. The node with the largest iova->pfn_lo value in the iova domain is deleted, iovad->cached_node will be updated to iovad->anchor, and then the alloc iova size exceeds the maximum iova size that can be allocated in the domain. After judging that retry_pfn is less than limit_pfn, call retry_pfn+1 to fix the overflow issue.