In the Linux kernel, the following vulnerability has been resolved: HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver Due to Race Condition In the ssi_protocol_probe() function, &ssi->work is bound with ssip_xmit_work(), In ssip_pn_setup(), the ssip_pn_xmit() function within the ssip_pn_ops structure is capable of starting the work. If we remove the module which will call ssi_protocol_remove() to make a cleanup, it will free ssi through kfree(ssi), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ssip_xmit_work ssi_protocol_remove | kfree(ssi); | | struct hsi_client *cl = ssi->cl; | // use ssi Fix it by ensuring that the work is canceled before proceeding with the cleanup in ssi_protocol_remove().

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_restart: fix use after free bug After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in ksmbd_sessions_deregister() In multichannel mode, UAF issue can occur in session_deregister when the second channel sets up a session through the connection of the first channel. session that is freed through the global session table can be accessed again through ->sessions of connection.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix session use-after-free in multichannel connection There is a race condition between session setup and ksmbd_sessions_deregister. The session can be freed before the connection is added to channel list of session. This patch check reference count of session before freeing it.

In the Linux kernel, the following vulnerability has been resolved: net: atm: fix use after free in lec_send() The ->send() operation frees skb so save the length before calling ->send() to avoid a use after free.

In the Linux kernel, the following vulnerability has been resolved: proc: fix UAF in proc_get_inode() Fix race between rmmod and /proc/XXX's inode instantiation. The bug is that pde->proc_ops don't belong to /proc, it belongs to a module, therefore dereferencing it after /proc entry has been registered is a bug unless use_pde/unuse_pde() pair has been used. use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops never changes so information necessary for inode instantiation can be saved _before_ proc_register() in PDE itself and used later, avoiding pde->proc_ops->... dereference. rmmod lookup sys_delete_module proc_lookup_de pde_get(de); proc_get_inode(dir->i_sb, de); mod->exit() proc_remove remove_proc_subtree proc_entry_rundown(de); free_module(mod); if (S_ISREG(inode->i_mode)) if (de->proc_ops->proc_read_iter) --> As module is already freed, will trigger UAF BUG: unable to handle page fault for address: fffffbfff80a702b PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:proc_get_inode+0x302/0x6e0 RSP: 0018:ffff88811c837998 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007 RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158 RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20 R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0 R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001 FS: 00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_lookup_de+0x11f/0x2e0 __lookup_slow+0x188/0x350 walk_component+0x2ab/0x4f0 path_lookupat+0x120/0x660 filename_lookup+0x1ce/0x560 vfs_statx+0xac/0x150 __do_sys_newstat+0x96/0x110 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e [adobriyan@gmail.com: don't do 2 atomic ops on the common path]

In the Linux kernel, the following vulnerability has been resolved: iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic() When performing an iSCSI boot using IPv6, iscsistart still reads the /sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix length is 64, this causes the shift exponent to become negative, triggering a UBSAN warning. As the concept of a subnet mask does not apply to IPv6, the value is set to ~0 to suppress the warning message.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd After the hci sync command releases l2cap_conn, the hci receive data work queue references the released l2cap_conn when sending to the upper layer. Add hci dev lock to the hci receive data work queue to synchronize the two. [1] BUG: KASAN: slab-use-after-free in l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 Read of size 8 at addr ffff8880271a4000 by task kworker/u9:2/5837 CPU: 0 UID: 0 PID: 5837 Comm: kworker/u9:2 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: hci1 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 l2cap_build_cmd net/bluetooth/l2cap_core.c:2964 [inline] l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 l2cap_sig_send_rej net/bluetooth/l2cap_core.c:5502 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5538 [inline] l2cap_recv_frame+0x221f/0x10db0 net/bluetooth/l2cap_core.c:6817 hci_acldata_packet net/bluetooth/hci_core.c:3797 [inline] hci_rx_work+0x508/0xdb0 net/bluetooth/hci_core.c:4040 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5837: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] l2cap_conn_add+0xa9/0x8e0 net/bluetooth/l2cap_core.c:6860 l2cap_connect_cfm+0x115/0x1090 net/bluetooth/l2cap_core.c:7239 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline] hci_remote_features_evt+0x68e/0xac0 net/bluetooth/hci_event.c:3726 hci_event_func net/bluetooth/hci_event.c:7473 [inline] hci_event_packet+0xac2/0x1540 net/bluetooth/hci_event.c:7525 hci_rx_work+0x3f3/0xdb0 net/bluetooth/hci_core.c:4035 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 54: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x196/0x430 mm/slub.c:4761 l2cap_connect_cfm+0xcc/0x1090 net/bluetooth/l2cap_core.c:7235 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline] hci_conn_failed+0x287/0x400 net/bluetooth/hci_conn.c:1266 hci_abort_conn_sync+0x56c/0x11f0 net/bluetooth/hci_sync.c:5603 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entr ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: qla1280: Fix kernel oops when debug level > 2 A null dereference or oops exception will eventually occur when qla1280.c driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I think its clear from the code that the intention here is sg_dma_len(s) not length of sg_next(s) when printing the debug info.

In the Linux kernel, the following vulnerability has been resolved: ppp: Fix KMSAN uninit-value warning with bpf Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the ppp driver not initializing a 2-byte header when using socket filter. The following code can generate a PPP filter BPF program: ''' struct bpf_program fp; pcap_t *handle; handle = pcap_open_dead(DLT_PPP_PPPD, 65535); pcap_compile(handle, &fp, "ip and outbound", 0, 0); bpf_dump(&fp, 1); ''' Its output is: ''' (000) ldh [2] (001) jeq #0x21 jt 2 jf 5 (002) ldb [0] (003) jeq #0x1 jt 4 jf 5 (004) ret #65535 (005) ret #0 ''' Wen can find similar code at the following link: https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680 The maintainer of this code repository is also the original maintainer of the ppp driver. As you can see the BPF program skips 2 bytes of data and then reads the 'Protocol' field to determine if it's an IP packet. Then it read the first byte of the first 2 bytes to determine the direction. The issue is that only the first byte indicating direction is initialized in current ppp driver code while the second byte is not initialized. For normal BPF programs generated by libpcap, uninitialized data won't be used, so it's not a problem. However, for carefully crafted BPF programs, such as those generated by syzkaller [2], which start reading from offset 0, the uninitialized data will be used and caught by KMSAN. [1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791 [2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000

In the Linux kernel, the following vulnerability has been resolved: vlan: enforce underlying device type Currently, VLAN devices can be created on top of non-ethernet devices. Besides the fact that it doesn't make much sense, this also causes a bug which leaks the address of a kernel function to usermode. When creating a VLAN device, we initialize GARP (garp_init_applicant) and MRP (mrp_init_applicant) for the underlying device. As part of the initialization process, we add the multicast address of each applicant to the underlying device, by calling dev_mc_add. __dev_mc_add uses dev->addr_len to determine the length of the new multicast address. This causes an out-of-bounds read if dev->addr_len is greater than 6, since the multicast addresses provided by GARP and MRP are only 6 bytes long. This behaviour can be reproduced using the following commands: ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo ip l set up dev gretest ip link add link gretest name vlantest type vlan id 100 Then, the following command will display the address of garp_pdu_rcv: ip maddr show | grep 01:80:c2:00:00:21 Fix the bug by enforcing the type of the underlying device during VLAN device initialization.

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Flush the notify_hotplug_work When performing continuous unbind/bind operations on the USB drivers available on the Renesas RZ/G2L SoC, a kernel crash with the message "Unable to handle kernel NULL pointer dereference at virtual address" may occur. This issue points to the usbhsc_notify_hotplug() function. Flush the delayed work to avoid its execution when driver resources are unavailable.

In the Linux kernel, the following vulnerability has been resolved: gpio: rcar: Use raw_spinlock to protect register access Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential memory leaks in session setup Make sure to free cifs_ses::auth_key.response before allocating it as we might end up leaking memory in reconnect or mounting.

In the Linux kernel, the following vulnerability has been resolved: drm/drm_vma_manager: Add drm_vma_node_allow_once() Currently there is no easy way for a drm driver to safely check and allow drm_vma_offset_node for a drm file just once. Allow drm drivers to call non-refcounted version of drm_vma_node_allow() so that a driver doesn't need to keep track of each drm_vma_node_allow() to call subsequent drm_vma_node_revoke() to prevent memory leak.

In the Linux kernel, the following vulnerability has been resolved: x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL Baoquan reported that after triggering a crash the subsequent crash-kernel fails to boot about half of the time. It triggers a NULL pointer dereference in the periodic tick code. This happens because the legacy timer interrupt (IRQ0) is resent in software which happens in soft interrupt (tasklet) context. In this context get_irq_regs() returns NULL which leads to the NULL pointer dereference. The reason for the resend is a spurious APIC interrupt on the IRQ0 vector which is captured and leads to a resend when the legacy timer interrupt is enabled. This is wrong because the legacy PIC interrupts are level triggered and therefore should never be resent in software, but nothing ever sets the IRQ_LEVEL flag on those interrupts, so the core code does not know about their trigger type. Ensure that IRQ_LEVEL is set when the legacy PCI interrupts are set up.

In the Linux kernel, the following vulnerability has been resolved: firewire: fix memory leak for payload of request subaction to IEC 61883-1 FCP region This patch is fix for Linux kernel v2.6.33 or later. For request subaction to IEC 61883-1 FCP region, Linux FireWire subsystem have had an issue of use-after-free. The subsystem allows multiple user space listeners to the region, while data of the payload was likely released before the listeners execute read(2) to access to it for copying to user space. The issue was fixed by a commit 281e20323ab7 ("firewire: core: fix use-after-free regression in FCP handler"). The object of payload is duplicated in kernel space for each listener. When the listener executes ioctl(2) with FW_CDEV_IOC_SEND_RESPONSE request, the object is going to be released. However, it causes memory leak since the commit relies on call of release_request() in drivers/firewire/core-cdev.c. Against the expectation, the function is never called due to the design of release_client_resource(). The function delegates release task to caller when called with non-NULL fourth argument. The implementation of ioctl_send_response() is the case. It should release the object explicitly. This commit fixes the bug.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/via: Avoid potential array out-of-bound in add_secret_dac_path() snd_hda_get_connections() can return a negative error code. It may lead to accessing 'conn' array at a negative index. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress Bug report and analysis from Ding Hui. During iSCSI session logout, if another task accesses the shost ipaddress attr, we can get a KASAN UAF report like this: [ 276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0 [ 276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088 [ 276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G E 6.1.0-rc8+ #3 [ 276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [ 276.944470] Call Trace: [ 276.944943] <TASK> [ 276.945397] dump_stack_lvl+0x34/0x48 [ 276.945887] print_address_description.constprop.0+0x86/0x1e7 [ 276.946421] print_report+0x36/0x4f [ 276.947358] kasan_report+0xad/0x130 [ 276.948234] kasan_check_range+0x35/0x1c0 [ 276.948674] _raw_spin_lock_bh+0x78/0xe0 [ 276.949989] iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp] [ 276.951765] show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi] [ 276.952185] dev_attr_show+0x3f/0x80 [ 276.953005] sysfs_kf_seq_show+0x1fb/0x3e0 [ 276.953401] seq_read_iter+0x402/0x1020 [ 276.954260] vfs_read+0x532/0x7b0 [ 276.955113] ksys_read+0xed/0x1c0 [ 276.955952] do_syscall_64+0x38/0x90 [ 276.956347] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.956769] RIP: 0033:0x7f5d3a679222 [ 276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222 [ 276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003 [ 276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000 [ 276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000 [ 276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58 [ 276.960536] </TASK> [ 276.961357] Allocated by task 2209: [ 276.961756] kasan_save_stack+0x1e/0x40 [ 276.962170] kasan_set_track+0x21/0x30 [ 276.962557] __kasan_kmalloc+0x7e/0x90 [ 276.962923] __kmalloc+0x5b/0x140 [ 276.963308] iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi] [ 276.963712] iscsi_session_setup+0xda/0xba0 [libiscsi] [ 276.964078] iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp] [ 276.964431] iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi] [ 276.964793] iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi] [ 276.965153] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.965546] netlink_unicast+0x4d5/0x7b0 [ 276.965905] netlink_sendmsg+0x78d/0xc30 [ 276.966236] sock_sendmsg+0xe5/0x120 [ 276.966576] ____sys_sendmsg+0x5fe/0x860 [ 276.966923] ___sys_sendmsg+0xe0/0x170 [ 276.967300] __sys_sendmsg+0xc8/0x170 [ 276.967666] do_syscall_64+0x38/0x90 [ 276.968028] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.968773] Freed by task 2209: [ 276.969111] kasan_save_stack+0x1e/0x40 [ 276.969449] kasan_set_track+0x21/0x30 [ 276.969789] kasan_save_free_info+0x2a/0x50 [ 276.970146] __kasan_slab_free+0x106/0x190 [ 276.970470] __kmem_cache_free+0x133/0x270 [ 276.970816] device_release+0x98/0x210 [ 276.971145] kobject_cleanup+0x101/0x360 [ 276.971462] iscsi_session_teardown+0x3fb/0x530 [libiscsi] [ 276.971775] iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp] [ 276.972143] iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi] [ 276.972485] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.972808] netlink_unicast+0x4d5/0x7b0 [ 276.973201] netlink_sendmsg+0x78d/0xc30 [ 276.973544] sock_sendmsg+0xe5/0x120 [ 276.973864] ____sys_sendmsg+0x5fe/0x860 [ 276.974248] ___sys_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress If during iscsi_sw_tcp_session_create() iscsi_tcp_r2tpool_alloc() fails, userspace could be accessing the host's ipaddress attr. If we then free the session via iscsi_session_teardown() while userspace is still accessing the session we will hit a use after free bug. Set the tcp_sw_host->session after we have completed session creation and can no longer fail.