U.S. flag   An official website of the United States government
Dot gov

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Https

Secure .gov websites use HTTPS
A lock (Dot gov) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Vulnerability Change Records for CVE-2025-39831

Change History

New CVE Received from kernel.org 9/16/2025 10:15:51 AM

Action Type Old Value New Value
Added Description

								
							
							
						
In the Linux kernel, the following vulnerability has been resolved:

fbnic: Move phylink resume out of service_task and into open/close

The fbnic driver was presenting with the following locking assert coming
out of a PM resume:
[   42.208116][  T164] RTNL: assertion failed at drivers/net/phy/phylink.c (2611)
[   42.208492][  T164] WARNING: CPU: 1 PID: 164 at drivers/net/phy/phylink.c:2611 phylink_resume+0x190/0x1e0
[   42.208872][  T164] Modules linked in:
[   42.209140][  T164] CPU: 1 UID: 0 PID: 164 Comm: bash Not tainted 6.17.0-rc2-virtme #134 PREEMPT(full)
[   42.209496][  T164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[   42.209861][  T164] RIP: 0010:phylink_resume+0x190/0x1e0
[   42.210057][  T164] Code: 83 e5 01 0f 85 b0 fe ff ff c6 05 1c cd 3e 02 01 90 ba 33 0a 00 00 48 c7 c6 20 3a 1d a5 48 c7 c7 e0 3e 1d a5 e8 21 b8 90 fe 90 <0f> 0b 90 90 e9 86 fe ff ff e8 42 ea 1f ff e9 e2 fe ff ff 48 89 ef
[   42.210708][  T164] RSP: 0018:ffffc90000affbd8 EFLAGS: 00010296
[   42.210983][  T164] RAX: 0000000000000000 RBX: ffff8880078d8400 RCX: 0000000000000000
[   42.211235][  T164] RDX: 0000000000000000 RSI: 1ffffffff4f10938 RDI: 0000000000000001
[   42.211466][  T164] RBP: 0000000000000000 R08: ffffffffa2ae79ea R09: fffffbfff4b3eb84
[   42.211707][  T164] R10: 0000000000000003 R11: 0000000000000000 R12: ffff888007ad8000
[   42.211997][  T164] R13: 0000000000000002 R14: ffff888006a18800 R15: ffffffffa34c59e0
[   42.212234][  T164] FS:  00007f0dc8e39740(0000) GS:ffff88808f51f000(0000) knlGS:0000000000000000
[   42.212505][  T164] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   42.212704][  T164] CR2: 00007f0dc8e9fe10 CR3: 000000000b56d003 CR4: 0000000000772ef0
[   42.213227][  T164] PKRU: 55555554
[   42.213366][  T164] Call Trace:
[   42.213483][  T164]  <TASK>
[   42.213565][  T164]  __fbnic_pm_attach.isra.0+0x8e/0xa0
[   42.213725][  T164]  pci_reset_function+0x116/0x1d0
[   42.213895][  T164]  reset_store+0xa0/0x100
[   42.214025][  T164]  ? pci_dev_reset_attr_is_visible+0x50/0x50
[   42.214221][  T164]  ? sysfs_file_kobj+0xc1/0x1e0
[   42.214374][  T164]  ? sysfs_kf_write+0x65/0x160
[   42.214526][  T164]  kernfs_fop_write_iter+0x2f8/0x4c0
[   42.214677][  T164]  ? kernfs_vma_page_mkwrite+0x1f0/0x1f0
[   42.214836][  T164]  new_sync_write+0x308/0x6f0
[   42.214987][  T164]  ? __lock_acquire+0x34c/0x740
[   42.215135][  T164]  ? new_sync_read+0x6f0/0x6f0
[   42.215288][  T164]  ? lock_acquire.part.0+0xbc/0x260
[   42.215440][  T164]  ? ksys_write+0xff/0x200
[   42.215590][  T164]  ? perf_trace_sched_switch+0x6d0/0x6d0
[   42.215742][  T164]  vfs_write+0x65e/0xbb0
[   42.215876][  T164]  ksys_write+0xff/0x200
[   42.215994][  T164]  ? __ia32_sys_read+0xc0/0xc0
[   42.216141][  T164]  ? do_user_addr_fault+0x269/0x9f0
[   42.216292][  T164]  ? rcu_is_watching+0x15/0xd0
[   42.216442][  T164]  do_syscall_64+0xbb/0x360
[   42.216591][  T164]  entry_SYSCALL_64_after_hwframe+0x4b/0x53
[   42.216784][  T164] RIP: 0033:0x7f0dc8ea9986

A bit of digging showed that we were invoking the phylink_resume as a part
of the fbnic_up path when we were enabling the service task while not
holding the RTNL lock. We should be enabling this sooner as a part of the
ndo_open path and then just letting the service task come online later.
This will help to enforce the correct locking and brings the phylink
interface online at the same time as the network interface, instead of at a
later time.

I tested this on QEMU to verify this was working by putting the system to
sleep using "echo mem > /sys/power/state" to put the system to sleep in the
guest and then using the command "system_wakeup" in the QEMU monitor.
Added Reference

								
							
							
						
https://git.kernel.org/stable/c/3ac5f54e47eb348a4bc26e600c63b4d778a22e23
Added Reference

								
							
							
						
https://git.kernel.org/stable/c/6ede14a2c6365e7e5d855643c7c8390b5268c467
Added Reference

								
							
							
						
https://git.kernel.org/stable/c/7aab65c62a8a8b48c02e600fe9367b2af662fcb6