Search Results (Refine Search)
- Keyword (text search): cpe:2.3:a:isc:bind:9.4.0:b2:*:*:-:*:*:*
- CPE Name Search: true
Vuln ID | Summary | CVSS Severity |
---|---|---|
CVE-2023-50387 |
Certain DNSSEC aspects of the DNS protocol (in RFC 4033, 4034, 4035, 6840, and related RFCs) allow remote attackers to cause a denial of service (CPU consumption) via one or more DNSSEC responses, aka the "KeyTrap" issue. One of the concerns is that, when there is a zone with many DNSKEY and RRSIG records, the protocol specification implies that an algorithm must evaluate all combinations of DNSKEY and RRSIG records. Published: February 14, 2024; 11:15:45 AM -0500 |
V4.0:(not available) V3.1: 7.5 HIGH V2.0:(not available) |
CVE-2023-4408 |
The DNS message parsing code in `named` includes a section whose computational complexity is overly high. It does not cause problems for typical DNS traffic, but crafted queries and responses may cause excessive CPU load on the affected `named` instance by exploiting this flaw. This issue affects both authoritative servers and recursive resolvers. This issue affects BIND 9 versions 9.0.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1. Published: February 13, 2024; 9:15:45 AM -0500 |
V4.0:(not available) V3.1: 7.5 HIGH V2.0:(not available) |
CVE-2023-3341 |
The code that processes control channel messages sent to `named` calls certain functions recursively during packet parsing. Recursion depth is only limited by the maximum accepted packet size; depending on the environment, this may cause the packet-parsing code to run out of available stack memory, causing `named` to terminate unexpectedly. Since each incoming control channel message is fully parsed before its contents are authenticated, exploiting this flaw does not require the attacker to hold a valid RNDC key; only network access to the control channel's configured TCP port is necessary. This issue affects BIND 9 versions 9.2.0 through 9.16.43, 9.18.0 through 9.18.18, 9.19.0 through 9.19.16, 9.9.3-S1 through 9.16.43-S1, and 9.18.0-S1 through 9.18.18-S1. Published: September 20, 2023; 9:15:11 AM -0400 |
V4.0:(not available) V3.1: 7.5 HIGH V2.0:(not available) |
CVE-2022-2795 |
By flooding the target resolver with queries exploiting this flaw an attacker can significantly impair the resolver's performance, effectively denying legitimate clients access to the DNS resolution service. Published: September 21, 2022; 7:15:09 AM -0400 |
V4.0:(not available) V3.1: 5.3 MEDIUM V2.0:(not available) |
CVE-2021-25219 |
In BIND 9.3.0 -> 9.11.35, 9.12.0 -> 9.16.21, and versions 9.9.3-S1 -> 9.11.35-S1 and 9.16.8-S1 -> 9.16.21-S1 of BIND Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.18 of the BIND 9.17 development branch, exploitation of broken authoritative servers using a flaw in response processing can cause degradation in BIND resolver performance. The way the lame cache is currently designed makes it possible for its internal data structures to grow almost infinitely, which may cause significant delays in client query processing. Published: October 27, 2021; 5:15:07 PM -0400 |
V4.0:(not available) V3.1: 5.3 MEDIUM V2.0: 5.0 MEDIUM |
CVE-2021-25216 |
In BIND 9.5.0 -> 9.11.29, 9.12.0 -> 9.16.13, and versions BIND 9.11.3-S1 -> 9.11.29-S1 and 9.16.8-S1 -> 9.16.13-S1 of BIND Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.1 of the BIND 9.17 development branch, BIND servers are vulnerable if they are running an affected version and are configured to use GSS-TSIG features. In a configuration which uses BIND's default settings the vulnerable code path is not exposed, but a server can be rendered vulnerable by explicitly setting values for the tkey-gssapi-keytab or tkey-gssapi-credential configuration options. Although the default configuration is not vulnerable, GSS-TSIG is frequently used in networks where BIND is integrated with Samba, as well as in mixed-server environments that combine BIND servers with Active Directory domain controllers. For servers that meet these conditions, the ISC SPNEGO implementation is vulnerable to various attacks, depending on the CPU architecture for which BIND was built: For named binaries compiled for 64-bit platforms, this flaw can be used to trigger a buffer over-read, leading to a server crash. For named binaries compiled for 32-bit platforms, this flaw can be used to trigger a server crash due to a buffer overflow and possibly also to achieve remote code execution. We have determined that standard SPNEGO implementations are available in the MIT and Heimdal Kerberos libraries, which support a broad range of operating systems, rendering the ISC implementation unnecessary and obsolete. Therefore, to reduce the attack surface for BIND users, we will be removing the ISC SPNEGO implementation in the April releases of BIND 9.11 and 9.16 (it had already been dropped from BIND 9.17). We would not normally remove something from a stable ESV (Extended Support Version) of BIND, but since system libraries can replace the ISC SPNEGO implementation, we have made an exception in this case for reasons of stability and security. Published: April 28, 2021; 9:15:08 PM -0400 |
V4.0:(not available) V3.1: 9.8 CRITICAL V2.0: 6.8 MEDIUM |
CVE-2021-25215 |
In BIND 9.0.0 -> 9.11.29, 9.12.0 -> 9.16.13, and versions BIND 9.9.3-S1 -> 9.11.29-S1 and 9.16.8-S1 -> 9.16.13-S1 of BIND Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.11 of the BIND 9.17 development branch, when a vulnerable version of named receives a query for a record triggering the flaw described above, the named process will terminate due to a failed assertion check. The vulnerability affects all currently maintained BIND 9 branches (9.11, 9.11-S, 9.16, 9.16-S, 9.17) as well as all other versions of BIND 9. Published: April 28, 2021; 9:15:08 PM -0400 |
V4.0:(not available) V3.1: 7.5 HIGH V2.0: 5.0 MEDIUM |
CVE-2020-8622 |
In BIND 9.0.0 -> 9.11.21, 9.12.0 -> 9.16.5, 9.17.0 -> 9.17.3, also affects 9.9.3-S1 -> 9.11.21-S1 of the BIND 9 Supported Preview Edition, An attacker on the network path for a TSIG-signed request, or operating the server receiving the TSIG-signed request, could send a truncated response to that request, triggering an assertion failure, causing the server to exit. Alternately, an off-path attacker would have to correctly guess when a TSIG-signed request was sent, along with other characteristics of the packet and message, and spoof a truncated response to trigger an assertion failure, causing the server to exit. Published: August 21, 2020; 5:15:12 PM -0400 |
V4.0:(not available) V3.1: 6.5 MEDIUM V2.0: 4.0 MEDIUM |
CVE-2020-8617 |
Using a specially-crafted message, an attacker may potentially cause a BIND server to reach an inconsistent state if the attacker knows (or successfully guesses) the name of a TSIG key used by the server. Since BIND, by default, configures a local session key even on servers whose configuration does not otherwise make use of it, almost all current BIND servers are vulnerable. In releases of BIND dating from March 2018 and after, an assertion check in tsig.c detects this inconsistent state and deliberately exits. Prior to the introduction of the check the server would continue operating in an inconsistent state, with potentially harmful results. Published: May 19, 2020; 10:15:11 AM -0400 |
V4.0:(not available) V3.1: 5.9 MEDIUM V2.0: 4.3 MEDIUM |
CVE-2020-8616 |
A malicious actor who intentionally exploits this lack of effective limitation on the number of fetches performed when processing referrals can, through the use of specially crafted referrals, cause a recursing server to issue a very large number of fetches in an attempt to process the referral. This has at least two potential effects: The performance of the recursing server can potentially be degraded by the additional work required to perform these fetches, and The attacker can exploit this behavior to use the recursing server as a reflector in a reflection attack with a high amplification factor. Published: May 19, 2020; 10:15:11 AM -0400 |
V4.0:(not available) V3.1: 8.6 HIGH V2.0: 5.0 MEDIUM |
CVE-2018-5741 |
To provide fine-grained controls over the ability to use Dynamic DNS (DDNS) to update records in a zone, BIND 9 provides a feature called update-policy. Various rules can be configured to limit the types of updates that can be performed by a client, depending on the key used when sending the update request. Unfortunately, some rule types were not initially documented, and when documentation for them was added to the Administrator Reference Manual (ARM) in change #3112, the language that was added to the ARM at that time incorrectly described the behavior of two rule types, krb5-subdomain and ms-subdomain. This incorrect documentation could mislead operators into believing that policies they had configured were more restrictive than they actually were. This affects BIND versions prior to BIND 9.11.5 and BIND 9.12.3. Published: January 16, 2019; 3:29:01 PM -0500 |
V4.0:(not available) V3.0: 6.5 MEDIUM V2.0: 4.0 MEDIUM |
CVE-2017-3145 |
BIND was improperly sequencing cleanup operations on upstream recursion fetch contexts, leading in some cases to a use-after-free error that can trigger an assertion failure and crash in named. Affects BIND 9.0.0 to 9.8.x, 9.9.0 to 9.9.11, 9.10.0 to 9.10.6, 9.11.0 to 9.11.2, 9.9.3-S1 to 9.9.11-S1, 9.10.5-S1 to 9.10.6-S1, 9.12.0a1 to 9.12.0rc1. Published: January 16, 2019; 3:29:00 PM -0500 |
V4.0:(not available) V3.1: 7.5 HIGH V2.0: 5.0 MEDIUM |
CVE-2017-3143 |
An attacker who is able to send and receive messages to an authoritative DNS server and who has knowledge of a valid TSIG key name for the zone and service being targeted may be able to manipulate BIND into accepting an unauthorized dynamic update. Affects BIND 9.4.0->9.8.8, 9.9.0->9.9.10-P1, 9.10.0->9.10.5-P1, 9.11.0->9.11.1-P1, 9.9.3-S1->9.9.10-S2, 9.10.5-S1->9.10.5-S2. Published: January 16, 2019; 3:29:00 PM -0500 |
V4.0:(not available) V3.0: 5.9 MEDIUM V2.0: 4.3 MEDIUM |
CVE-2017-3142 |
An attacker who is able to send and receive messages to an authoritative DNS server and who has knowledge of a valid TSIG key name may be able to circumvent TSIG authentication of AXFR requests via a carefully constructed request packet. A server that relies solely on TSIG keys for protection with no other ACL protection could be manipulated into: providing an AXFR of a zone to an unauthorized recipient or accepting bogus NOTIFY packets. Affects BIND 9.4.0->9.8.8, 9.9.0->9.9.10-P1, 9.10.0->9.10.5-P1, 9.11.0->9.11.1-P1, 9.9.3-S1->9.9.10-S2, 9.10.5-S1->9.10.5-S2. Published: January 16, 2019; 3:29:00 PM -0500 |
V4.0:(not available) V3.0: 3.7 LOW V2.0: 4.3 MEDIUM |
CVE-2017-3141 |
The BIND installer on Windows uses an unquoted service path which can enable a local user to achieve privilege escalation if the host file system permissions allow this. Affects BIND 9.2.6-P2->9.2.9, 9.3.2-P1->9.3.6, 9.4.0->9.8.8, 9.9.0->9.9.10, 9.10.0->9.10.5, 9.11.0->9.11.1, 9.9.3-S1->9.9.10-S1, 9.10.5-S1. Published: January 16, 2019; 3:29:00 PM -0500 |
V4.0:(not available) V3.0: 7.8 HIGH V2.0: 7.2 HIGH |
CVE-2016-9444 |
named in ISC BIND 9.x before 9.9.9-P5, 9.10.x before 9.10.4-P5, and 9.11.x before 9.11.0-P2 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a crafted DS resource record in an answer. Published: January 12, 2017; 1:59:00 AM -0500 |
V4.0:(not available) V3.0: 7.5 HIGH V2.0: 5.0 MEDIUM |
CVE-2016-9131 |
named in ISC BIND 9.x before 9.9.9-P5, 9.10.x before 9.10.4-P5, and 9.11.x before 9.11.0-P2 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a malformed response to an RTYPE ANY query. Published: January 12, 2017; 1:59:00 AM -0500 |
V4.0:(not available) V3.1: 7.5 HIGH V2.0: 5.0 MEDIUM |
CVE-2016-8864 |
named in ISC BIND 9.x before 9.9.9-P4, 9.10.x before 9.10.4-P4, and 9.11.x before 9.11.0-P1 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a DNAME record in the answer section of a response to a recursive query, related to db.c and resolver.c. Published: November 02, 2016; 1:59:00 PM -0400 |
V4.0:(not available) V3.1: 7.5 HIGH V2.0: 5.0 MEDIUM |
CVE-2016-2848 |
ISC BIND 9.1.0 through 9.8.4-P2 and 9.9.0 through 9.9.2-P2 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via malformed options data in an OPT resource record. Published: October 21, 2016; 6:59:00 AM -0400 |
V4.0:(not available) V3.0: 7.5 HIGH V2.0: 5.0 MEDIUM |
CVE-2016-2775 |
ISC BIND 9.x before 9.9.9-P2, 9.10.x before 9.10.4-P2, and 9.11.x before 9.11.0b2, when lwresd or the named lwres option is enabled, allows remote attackers to cause a denial of service (daemon crash) via a long request that uses the lightweight resolver protocol. Published: July 19, 2016; 6:59:00 PM -0400 |
V4.0:(not available) V3.1: 5.9 MEDIUM V2.0: 4.3 MEDIUM |