An Origin Validation vulnerability in MAC address validation of Juniper Networks Junos OS Evolved on PTX10003 Series allows a network-adjacent attacker to bypass MAC address checking, allowing MAC addresses not intended to reach the adjacent LAN to be forwarded to the downstream network. Due to this issue, the router will start forwarding traffic if a valid route is present in forwarding-table, causing a loop and congestion in the downstream layer-2 domain connected to the device. This issue affects Juniper Networks Junos OS Evolved on PTX10003 Series: * All versions prior to 21.4R3-S4-EVO; * 22.1 versions prior to 22.1R3-S3-EVO; * 22.2 version 22.2R1-EVO and later versions; * 22.3 versions prior to 22.3R2-S2-EVO, 22.3R3-S1-EVO; * 22.4 versions prior to 22.4R2-S1-EVO, 22.4R3-EVO; * 23.2 versions prior to 23.2R2-EVO.

An Exposure of Sensitive Information vulnerability in the 'file copy' command of Junos OS Evolved allows a local, authenticated attacker with shell access to view passwords supplied on the CLI command-line. These credentials can then be used to provide unauthorized access to the remote system. This issue affects Juniper Networks Junos OS Evolved: * All versions prior to 20.4R3-S7-EVO; * 21.1 versions 21.1R1-EVO and later; * 21.2 versions prior to 21.2R3-S5-EVO; * 21.3 versions prior to 21.3R3-S4-EVO; * 21.4 versions prior to 21.4R3-S4-EVO; * 22.1 versions prior to 22.1R3-S2-EVO; * 22.2 versions prior to 22.2R2-EVO.

An Improper Handling of Exceptional Conditions vulnerability in AS PATH processing of Juniper Networks Junos OS and Junos OS Evolved allows an attacker to send a BGP update message with an AS PATH containing a large number of 4-byte ASes, leading to a Denial of Service (DoS). Continued receipt and processing of these BGP updates will create a sustained Denial of Service (DoS) condition. This issue is hit when the router has Non-Stop Routing (NSR) enabled, has a non-4-byte-AS capable BGP neighbor, receives a BGP update message with a prefix that includes a long AS PATH containing large number of 4-byte ASes, and has to advertise the prefix towards the non-4-byte-AS capable BGP neighbor. Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability. This issue affects: Juniper Networks Junos OS: * All versions prior to 20.4R3-S8; * 21.1 versions 21.1R1 and later; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S5; * 22.1 versions prior to 22.1R3-S4; * 22.2 versions prior to 22.2R3-S2; * 22.3 versions prior to 22.3R2-S2, 22.3R3-S1; * 22.4 versions prior to 22.4R2-S1, 22.4R3. Juniper Networks Junos OS Evolved * All versions prior to 20.4R3-S8-EVO; * 21.1 versions 21.1R1-EVO and later; * 21.2 versions prior to 21.2R3-S6-EVO; * 21.3 versions prior to 21.3R3-S5-EVO; * 21.4 versions prior to 21.4R3-S5-EVO; * 22.1 versions prior to 22.1R3-S4-EVO; * 22.2 versions prior to 22.2R3-S2-EVO; * 22.3 versions prior to 22.3R2-S2-EVO, 22.3R3-S1-EVO; * 22.4 versions prior to 22.4R2-S1-EVO, 22.4R3-EVO.

An Improper Input Validation vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). When certain specific crafted BGP UPDATE messages are received over an established BGP session, one BGP session may be torn down with an UPDATE message error, or the issue may propagate beyond the local system which will remain non-impacted, but may affect one or more remote systems. This issue is exploitable remotely as the crafted UPDATE message can propagate through unaffected systems and intermediate BGP speakers. Continuous receipt of the crafted BGP UPDATE messages will create a sustained Denial of Service (DoS) condition for impacted devices. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations. This issue requires a remote attacker to have at least one established BGP session.

An Improper Check or Handling of Exceptional Conditions vulnerability in the Layer-2 control protocols daemon (l2cpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a Denial of Service (DoS). When a malformed LLDP packet is received, l2cpd will crash and restart. The impact of the l2cpd crash is reinitialization of STP protocols (RSTP, MSTP or VSTP), and MVRP and ERP. Also, if any services depend on LLDP state (like PoE or VoIP device recognition), then these will also be affected. Continued receipt of such packets will lead to a sustained Denial of Service. This issue affects: Juniper Networks Junos OS 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S3; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R2. Juniper Networks Junos OS Evolved 21.4-EVO versions prior to 21.4R3-S2-EVO; 22.1-EVO versions prior to 22.1R3-S3-EVO; 22.2-EVO versions prior to 22.2R2-S1-EVO, 22.2R3-EVO; 22.3-EVO versions prior to 22.3R2-EVO.

A Reachable Assertion vulnerability in Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a locally-based, low-privileged attacker to cause a Denial of Service (DoS). On all Junos OS and Junos OS Evolved, when a specific L2VPN command is run, RPD will crash and restart. Continued execution of this specific command will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS All versions prior to 19.3R3-S10; 20.1 versions prior to 20.1R3-S4; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S2; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R3; 22.2 versions prior to 22.2R2; 22.3 versions prior to 22.3R2; Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S7-EVO; 21.1 versions prior to 21.1R3-S3-EVO; 21.2 versions prior to 21.2R3-S5-EVO; 21.3 versions prior to 21.3R3-S4-EVO; 21.4 versions prior to 21.4R3-EVO; 22.1 versions prior to 22.1R3-EVO; 22.2 versions prior to 22.2R2-EVO; 22.3 versions prior to 22.3R2-EVO;

A Use of an Uninitialized Resource vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, authenticated attacker with low privileges to cause a Denial of Service (DoS). On all Junos OS and Junos OS Evolved platforms, in a Multicast only Fast Reroute (MoFRR) scenario, the rpd process can crash when a a specific low privileged CLI command is executed. The rpd crash will impact all routing protocols until the process has automatically been restarted. As the operational state which makes this issue exploitable is outside the attackers control, this issue is considered difficult to exploit. Continued execution of this command will lead to a sustained DoS. This issue affects: Juniper Networks Junos OS 19.4 version 19.4R3-S5 and later versions prior to 19.4R3-S9; 20.1 version 20.1R2 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S2; 21.3 versions prior to 21.3R3-S1; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R1-S2, 22.1R2; 22.2 versions prior to 22.2R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S6-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO version 21.2R1-EVO and later versions; 21.3-EVO versions prior to 21.3R3-S1-EVO; 21.4-EVO versions prior to 21.4R3-EVO; 22.1-EVO versions prior to 22.1R1-S2-EVO, 22.1R2-EVO; 22.2-EVO versions prior to 22.2R2-EVO.

A Use After Free vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS Evolved on PTX10001-36MR, and PTX10004, PTX10008, PTX10016 with LC1201/1202 allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS). The process 'aftman-bt' will crash after multiple flaps on a multicast-only fast reroute (MoFRR) enabled interface. This will cause the respective FPC to stop forwarding traffic and it needs to be rebooted to restore the service. An indication that the system experienced this issue is the following log message:   <date> <hostname> evo-aftmand-bt[<pid>]: [Error] jexpr_fdb: sanity check failed, ... , app_name L3 Mcast Routes This issue affects Juniper Networks Junos OS Evolved on PTX10001-36MR, PTX10004, PTX10008, PTX10016 with LC1201/1202: 21.2 version 21.2R1-EVO and later versions; 21.3 version 21.3R1-EVO and later versions; 21.4 versions prior to 21.4R3-S3-EVO; 22.1 version 22.1R1-EVO and later versions; 22.2 versions prior to 22.2R3-S2-EVO; 22.3 versions prior to 22.3R3-EVO; 22.4 versions prior to 22.4R1-S2-EVO, 22.4R2-EVO.

An Improper Input Validation vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). When a BGP update message is received over an established BGP session, and that message contains a specific, optional transitive attribute, this session will be torn down with an update message error. This issue cannot propagate beyond an affected system as the processing error occurs as soon as the update is received. This issue is exploitable remotely as the respective attribute can propagate through unaffected systems and intermediate AS (if any). Continuous receipt of a BGP update containing this attribute will create a sustained Denial of Service (DoS) condition. Some customers have experienced these BGP session flaps which prompted Juniper SIRT to release this advisory out of cycle before fixed releases are widely available as there is an effective workaround. This issue affects: Juniper Networks Junos OS 15.1R1 and later versions prior to 20.4R3-S8; 21.1 version 21.1R1 and later versions prior to 21.2R3-S6; 21.3 versions prior to 21.3R3-S5; 21.4 versions prior to 21.4R3-S4; 22.1 versions prior to 22.1R3-S4; 22.2 versions prior to 22.2R3-S2; 22.3 versions prior to 22.3R2-S2, 22.3R3-S1; 22.4 versions prior to 22.4R2-S1, 22.4R3; 23.1 versions prior to 23.1R1-S1, 23.1R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S8-EVO; 21.1 version 21.1R1-EVO and later versions prior to 21.2R3-S6-EVO; 21.3 versions prior to 21.3R3-S5-EVO; 21.4 versions prior to 21.4R3-S4-EVO; 22.1 versions prior to 22.1R3-S4-EVO; 22.2 versions prior to 22.2R3-S2-EVO; 22.3 versions prior to 22.3R2-S2-EVO, 22.3R3-S1-EVO; 22.4 versions prior to 22.4R2-S1-EVO, 22.4R3-EVO; 23.1 versions prior to 23.1R1-S1-EVO, 23.1R2-EVO.

An OS Command Injection vulnerability in gRPC Network Operations Interface (gNOI) server module of Juniper Networks Junos OS Evolved allows an authenticated, low privileged, network based attacker to inject shell commands and execute code. This issue affects Juniper Networks Junos OS Evolved 21.4 version 21.4R1-EVO and later versions prior to 22.1R1-EVO.

An Improper Input Validation vulnerability in the kernel of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS). If the receipt of router advertisements is enabled on an interface and a specifically malformed RA packet is received, memory corruption will happen which leads to an rpd crash. This issue affects: Juniper Networks Junos OS 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S3; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2; 22.1 versions prior to 22.1R2. Juniper Networks Junos OS Evolved 20.3-EVO version 20.3R1-EVO and later versions; 20.4-EVO versions prior to 20.4R3-S6-EVO; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R2-EVO; 22.1-EVO versions prior to 22.1R2-EVO.

A Use After Free vulnerability in the routing protocol daemon of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause Denial of Service (DoS). In a rib sharding scenario the rpd process will crash shortly after specific CLI command is issued. This issue is more likely to occur in a scenario with high route scale (>1M routes). This issue affects: Juniper Networks Junos OS * 20.2 version 20.2R3-S5 and later versions prior to 20.2R3-S6; * 20.3 version 20.3R3-S2 and later versions prior to 20.3R3-S5; * 20.4 version 20.4R3-S1 and later versions prior to 20.4R3-S4 * 21.1 version 21.1R3 and later versions prior to 21.1R3-S3; * 21.2 version 21.2R1-S2, 21.2R2-S1 and later versions prior to 21.2R3-S2; * 21.3 version 21.3R2 and later versions prior to 21.3R3; * 21.4 versions prior to 21.4R2-S1, 21.4R3; * 22.1 versions prior to 22.1R2. Juniper Networks Junos OS Evolved * 20.4-EVO version 20.4R3-S1-EVO and later versions prior to 20.4R3-S6-EVO; * 21.2-EVO version 21.2R1-S2-EVO and later versions prior to 21.2R3-S4-EVO; * 21.3-EVO version 21.3R2-EVO and later versions prior to 21.3R3-S1-EVO; * 21.4-EVO versions prior to 21.4R2-S1-EVO, 21.4R3-EVO; * 22.1-EVO versions prior to 22.1R2-EVO.

An Insecure Default Initialization of Resource vulnerability in Juniper Networks Junos OS Evolved allows an unauthenticated, network based attacker to read certain confidential information. In the default configuration it is possible to read confidential information about locally configured (administrative) users of the affected system. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S7-EVO on pending commit???; 21.1-EVO versions prior to 21.1R3-S4-EVO on awaiting build; 21.4-EVO versions prior to 21.4R3-S1-EVO; 22.2-EVO versions prior to 22.2R3-EVO; 21.2-EVO versions prior to 21.2R3-S5-EVO on pending commit???; 21.3-EVO version 21.3R1-EVO and later versions; 22.1-EVO version 22.1R1-EVO and later versions; 22.2-EVO versions prior to 22.2R2-S1-EVO.

An Improper Authorization vulnerability in the 'sysmanctl' shell command of Juniper Networks Junos OS Evolved allows a local, authenticated attacker to execute administrative commands that could impact the integrity of the system or system availability. Administrative functions such as daemon restarting, routing engine (RE) switchover, and node shutdown can all be performed through exploitation of the 'sysmanctl' command. Access to the 'sysmanctl' command is only available from the Junos shell. Neither direct nor indirect access to 'sysmanctl' is available from the Junos CLI. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S5-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-EVO; 21.4 versions prior to 21.4R1-S2-EVO, 21.4R2-EVO.

A Use of Uninitialized Resource vulnerability in the Border Gateway Protocol (BGP) software of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker to send specific genuine BGP packets to a device configured with BGP to cause a Denial of Service (DoS) by crashing the Routing Protocol Daemon (rpd). This issue is triggered when the packets attempt to initiate a BGP connection before a BGP session is successfully established. Continued receipt of these specific BGP packets will cause a sustained Denial of Service condition. This issue is triggerable in both iBGP and eBGP deployments. This issue affects: Juniper Networks Junos OS 21.1 version 21.1R1 and later versions prior to 21.1R3-S5; 21.2 version 21.2R1 and later versions prior to 21.2R3-S2; 21.3 version 21.3R1 and later versions prior to 21.3R3-S2; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R3; 22.2 versions prior to 22.2R2. This issue does not affect Juniper Networks Junos OS versions prior to 21.1R1. This issue affects: Juniper Networks Junos OS Evolved 21.1-EVO version 21.1R1-EVO and later versions prior to 21.4R3-EVO; 22.1-EVO versions prior to 22.1R3-EVO; 22.2-EVO versions prior to 22.2R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions prior to 21.1R1-EVO.

An Incorrect Permission Assignment for Critical Resource vulnerability in Juniper Networks Junos OS Evolved allows a local, authenticated low-privileged attacker to copy potentially malicious files into an existing Docker container on the local system. A follow-on administrator could then inadvertently start the Docker container leading to the malicious files being executed as root. This issue only affects systems with Docker configured and enabled, which is not enabled by default. Systems without Docker started are not vulnerable to this issue. This issue affects Juniper Networks Junos OS Evolved: 20.4 versions prior to 20.4R3-S5-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R3-EVO; 21.4 versions prior to 21.4R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions prior to 19.2R1-EVO.

A Missing Release of Memory after Effective Lifetime vulnerability in the kernel of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS). In a segment-routing scenario with OSPF as IGP, when a peer interface continuously flaps, next-hop churn will happen and a continuous increase in Routing Protocol Daemon (rpd) memory consumption will be observed. This will eventually lead to an rpd crash and restart when the memory is full. The memory consumption can be monitored using the CLI command "show task memory detail" as shown in the following example: user@host> show task memory detail | match "RT_NEXTHOPS_TEMPLATE|RT_TEMPLATE_BOOK_KEE" RT_NEXTHOPS_TEMPLATE 1008 1024 T 50 51200 50 51200 RT_NEXTHOPS_TEMPLATE 688 768 T 50 38400 50 38400 RT_NEXTHOPS_TEMPLATE 368 384 T 412330 158334720 412330 158334720 RT_TEMPLATE_BOOK_KEE 2064 2560 T 33315 85286400 33315 85286400 user@host> show task memory detail | match "RT_NEXTHOPS_TEMPLATE|RT_TEMPLATE_BOOK_KEE" RT_NEXTHOPS_TEMPLATE 1008 1024 T 50 51200 50 51200 RT_NEXTHOPS_TEMPLATE 688 768 T 50 38400 50 38400 RT_NEXTHOPS_TEMPLATE 368 384 T 419005 160897920 419005 160897920 <=== RT_TEMPLATE_BOOK_KEE 2064 2560 T 39975 102336000 39975 10233600 <=== This issue affects: Juniper Networks Junos OS All versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R2-S8, 19.4R3-S9; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S2; 21.3 versions prior to 21.3R3-S1; 21.4 versions prior to 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S4-EVO; 21.4 versions prior to 21.4R2-S1-EVO, 21.4R3-EVO; 22.1 versions prior to 22.1R2-EVO.

A Use After Free vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). In a Non Stop Routing (NSR) scenario, an unexpected kernel restart might be observed if "bgp auto-discovery" is enabled and if there is a BGP neighbor flap of auto-discovery sessions for any reason. This is a race condition which is outside of an attackers direct control and it depends on system internal timing whether this issue occurs. This issue affects Juniper Networks Junos OS Evolved: 21.3 versions prior to 21.3R3-EVO; 21.4 versions prior to 21.4R2-EVO; 22.1 versions prior to 22.1R2-EVO; 22.2 versions prior to 22.2R1-S1-EVO, 22.2R2-EVO.

An Uncontrolled Resource Consumption vulnerability in the PFE management daemon (evo-pfemand) of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause an FPC crash leading to a Denial of Service (DoS). When a specific SNMP GET operation or a specific CLI command is executed this will cause a GUID resource leak, eventually leading to exhaustion and result in an FPC crash and reboot. GUID exhaustion will trigger a syslog message like one of the following for example: evo-pfemand[<pid>]: get_next_guid: Ran out of Guid Space ... evo-aftmand-zx[<pid>]: get_next_guid: Ran out of Guid Space ... This leak can be monitored by running the following command and taking note of the value in the rightmost column labeled Guids: user@host> show platform application-info allocations app evo-pfemand | match "IFDId|IFLId|Context" Node Application Context Name Live Allocs Fails Guids re0 evo-pfemand net::juniper::interfaces::IFDId 0 3448 0 3448 re0 evo-pfemand net::juniper::interfaces::IFLId 0 561 0 561 user@host> show platform application-info allocations app evo-pfemand | match "IFDId|IFLId|Context" Node Application Context Name Live Allocs Fails Guids re0 evo-pfemand net::juniper::interfaces::IFDId 0 3784 0 3784 re0 evo-pfemand net::juniper::interfaces::IFLId 0 647 0 647 This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S3-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO versions prior to 21.2R3-S4-EVO; 21.3-EVO version 21.3R1-EVO and later versions; 21.4-EVO versions prior to 21.4R2-EVO.

An Allocation of Resources Without Limits or Throttling weakness in the memory management of the Packet Forwarding Engine (PFE) on Juniper Networks Junos OS Evolved PTX10003 Series devices allows an adjacently located attacker who has established certain preconditions and knowledge of the environment to send certain specific genuine packets to begin a Time-of-check Time-of-use (TOCTOU) Race Condition attack which will cause a memory leak to begin. Once this condition begins, and as long as the attacker is able to sustain the offending traffic, a Distributed Denial of Service (DDoS) event occurs. As a DDoS event, the offending packets sent by the attacker will continue to flow from one device to another as long as they are received and processed by any devices, ultimately causing a cascading outage to any vulnerable devices. Devices not vulnerable to the memory leak will process and forward the offending packet(s) to neighboring devices. Due to internal anti-flood security controls and mechanisms reaching their maximum limit of response in the worst-case scenario, all affected Junos OS Evolved devices will reboot in as little as 1.5 days. Reboots to restore services cannot be avoided once the memory leak begins. The device will self-recover after crashing and rebooting. Operator intervention isn't required to restart the device. This issue affects: Juniper Networks Junos OS Evolved on PTX10003: All versions prior to 20.4R3-S4-EVO; 21.3 versions prior to 21.3R3-S1-EVO; 21.4 versions prior to 21.4R2-S2-EVO, 21.4R3-EVO; 22.1 versions prior to 22.1R1-S2-EVO, 22.1R2-EVO; 22.2 versions prior to 22.2R2-EVO. To check memory, customers may VTY to the PFE first then execute the following show statement: show jexpr jtm ingress-main-memory chip 255 | no-more Alternatively one may execute from the RE CLI: request pfe execute target fpc0 command "show jexpr jtm ingress-main-memory chip 255 | no-more" Iteration 1: Example output: Mem type: NH, alloc type: JTM 136776 bytes used (max 138216 bytes used) 911568 bytes available (909312 bytes from free pages) Iteration 2: Example output: Mem type: NH, alloc type: JTM 137288 bytes used (max 138216 bytes used) 911056 bytes available (909312 bytes from free pages) The same can be seen in the CLI below, assuming the scale does not change: show npu memory info Example output: FPC0:NPU16 mem-util-jnh-nh-size 2097152 FPC0:NPU16 mem-util-jnh-nh-allocated 135272 FPC0:NPU16 mem-util-jnh-nh-utilization 6