Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

A vulnerability in the Cisco IOS XE Software REST API could allow an authenticated, remote attacker to bypass API authorization checks and use the API to perform privileged actions on an affected device. The vulnerability is due to insufficient authorization checks for requests that are sent to the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious request to an affected device via the REST API. A successful exploit could allow the attacker to selectively bypass authorization checks for the REST API of the affected software and use the API to perform privileged actions on an affected device. Cisco Bug IDs: CSCuz56428.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

Multiple vulnerabilities in the web-based user interface (web UI) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web UI of the affected software. The vulnerabilities are due to insufficient input validation of certain parameters that are passed to the affected software via the web UI. An attacker could exploit these vulnerabilities by persuading a user of the affected UI to access a malicious link or by intercepting a user request for the affected UI and injecting malicious code into the request. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected UI or allow the attacker to access sensitive browser-based information on the user's system. Cisco Bug IDs: CSCuz38591, CSCvb09530, CSCvb10022.

A vulnerability in the Forwarding Information Base (FIB) code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, network attacker to cause a denial of service (DoS) condition. The vulnerability is due to a limitation in the way the FIB is internally representing recursive routes. An attacker could exploit this vulnerability by injecting routes into the routing protocol that have a specific recursive pattern. The attacker must be in a position on the network that provides the ability to inject a number of recursive routes with a specific pattern. An exploit could allow the attacker to cause an affected device to reload, creating a DoS condition. Cisco Bug IDs: CSCva91655.

Multiple vulnerabilities in the web-based user interface (web UI) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web UI of the affected software. The vulnerabilities are due to insufficient input validation of certain parameters that are passed to the affected software via the web UI. An attacker could exploit these vulnerabilities by persuading a user of the affected UI to access a malicious link or by intercepting a user request for the affected UI and injecting malicious code into the request. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected UI or allow the attacker to access sensitive browser-based information on the user's system. Cisco Bug IDs: CSCuz38591, CSCvb09530, CSCvb10022.

Multiple vulnerabilities in the web-based user interface (web UI) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web UI of the affected software. The vulnerabilities are due to insufficient input validation of certain parameters that are passed to the affected software via the web UI. An attacker could exploit these vulnerabilities by persuading a user of the affected UI to access a malicious link or by intercepting a user request for the affected UI and injecting malicious code into the request. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected UI or allow the attacker to access sensitive browser-based information on the user's system. Cisco Bug IDs: CSCuz38591, CSCvb09530, CSCvb10022.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuv91356.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

A vulnerability in the Border Gateway Protocol (BGP) over an Ethernet Virtual Private Network (EVPN) for Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a denial of service (DoS) condition, or potentially corrupt the BGP routing table, which could result in network instability. The vulnerability exists due to changes in the implementation of the BGP MPLS-Based Ethernet VPN RFC (RFC 7432) draft between IOS XE software releases. When the BGP Inclusive Multicast Ethernet Tag Route or BGP EVPN MAC/IP Advertisement Route update packet is received, it could be possible that the IP address length field is miscalculated. An attacker could exploit this vulnerability by sending a crafted BGP packet to an affected device after the BGP session was established. An exploit could allow the attacker to cause the affected device to reload or corrupt the BGP routing table; either outcome would result in a DoS. The vulnerability may be triggered when the router receives a crafted BGP message from a peer on an existing BGP session. This vulnerability affects all releases of Cisco IOS XE Software prior to software release 16.3 that support BGP EVPN configurations. If the device is not configured for EVPN, it is not vulnerable. Cisco Bug IDs: CSCui67191, CSCvg52875.

A vulnerability in motherboard console ports of line cards for Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to access an affected device's operating system. The vulnerability exists because an engineering console port is available on the motherboard of the affected line cards. An attacker could exploit this vulnerability by physically connecting to the console port on the line card. A successful exploit could allow the attacker to gain full access to the affected device's operating system. This vulnerability affects only Cisco ASR 1000 Series Routers that have removable line cards and Cisco cBR-8 Converged Broadband Routers, if they are running certain Cisco IOS XE 3.16 through 16.5 releases. Cisco Bug IDs: CSCvc65866, CSCve77132.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS 15.0 through 15.6 and Cisco IOS XE 3.5 through 16.5 could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to how an affected device processes certain IKEv2 packets. An attacker could exploit this vulnerability by sending specific IKEv2 packets to an affected device to be processed. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. This vulnerability affects Cisco devices that have the Internet Security Association and Key Management Protocol (ISAKMP) enabled. Although only IKEv2 packets can be used to trigger this vulnerability, devices that are running Cisco IOS Software or Cisco IOS XE Software are vulnerable when ISAKMP is enabled. A device does not need to be configured with any IKEv2-specific features to be vulnerable. Many features use IKEv2, including different types of VPNs such as the following: LAN-to-LAN VPN; Remote-access VPN, excluding SSL VPN; Dynamic Multipoint VPN (DMVPN); and FlexVPN. Cisco Bug IDs: CSCvc41277.

A vulnerability in the Cisco Network Plug and Play application of Cisco IOS 12.4 through 15.6 and Cisco IOS XE 3.3 through 16.4 could allow an unauthenticated, remote attacker to gain unauthorized access to sensitive data by using an invalid certificate. The vulnerability is due to insufficient certificate validation by the affected software. An attacker could exploit this vulnerability by supplying a crafted certificate to an affected device. A successful exploit could allow the attacker to conduct man-in-the-middle attacks to decrypt confidential information on user connections to the affected software. Cisco Bug IDs: CSCvc33171.

A vulnerability in the UDP processing code of Cisco IOS 15.1, 15.2, and 15.4 and IOS XE 3.14 through 3.18 could allow an unauthenticated, remote attacker to cause the input queue of an affected system to hold UDP packets, causing an interface queue wedge and a denial of service (DoS) condition. The vulnerability is due to Cisco IOS Software application changes that create UDP sockets and leave the sockets idle without closing them. An attacker could exploit this vulnerability by sending UDP packets with a destination port of 0 to an affected device. A successful exploit could allow the attacker to cause UDP packets to be held in the input interfaces queue, resulting in a DoS condition. The input interface queue will stop holding UDP packets when it receives 250 packets. Cisco Bug IDs: CSCup10024, CSCva55744, CSCva95506.

A vulnerability in the Autonomic Networking feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to reset the Autonomic Control Plane (ACP) of an affected system and view ACP packets that are transferred in clear text within an affected system, an Information Disclosure Vulnerability. More Information: CSCvd51214. Known Affected Releases: Denali-16.2.1 Denali-16.3.1.

A vulnerability in the Autonomic Networking feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause autonomic nodes of an affected system to reload, resulting in a denial of service (DoS) condition. More Information: CSCvd88936. Known Affected Releases: Denali-16.2.1 Denali-16.3.1.

A vulnerability in the DHCP code for the Zero Touch Provisioning feature of Cisco ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a format string vulnerability when processing a crafted DHCP packet for Zero Touch Provisioning. An attacker could exploit this vulnerability by sending a specially crafted DHCP packet to an affected device. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco ASR 920 Series Aggregation Services Routers that are running an affected release of Cisco IOS XE Software (3.13 through 3.18) and are listening on the DHCP server port. By default, the devices do not listen on the DHCP server port. Cisco Bug IDs: CSCuy56385.

A vulnerability in the Autonomic Networking Infrastructure (ANI) feature of Cisco IOS Software (15.4 through 15.6) and Cisco IOS XE Software (3.7 through 3.18, and 16) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted IPv6 packet to a device that is running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature. A device must meet two conditions to be affected by this vulnerability: (1) the device must be running a version of Cisco IOS Software or Cisco IOS XE Software that supports ANI (regardless of whether ANI is configured); and (2) the device must have a reachable IPv6 interface. An exploit could allow the attacker to cause the affected device to reload. Cisco Bug IDs: CSCvc42729.

A vulnerability in the Autonomic Networking Infrastructure (ANI) registrar feature of Cisco IOS Software (possibly 15.2 through 15.6) and Cisco IOS XE Software (possibly 3.7 through 3.18, and 16) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted autonomic network channel discovery packet to a device that has all the following characteristics: (1) running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature; (2) configured as an autonomic registrar; (3) has a whitelist configured. An exploit could allow the attacker to cause the affected device to reload. Note: Autonomic networking should be configured with a whitelist. Do not remove the whitelist as a workaround. Cisco Bug IDs: CSCvc42717.