In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix GEM handle creation UAF Userspace can guess the handle value and try to race GEM object creation with handle close, resulting in a use-after-free if we dereference the object after dropping the handle's reference. For that reason, dropping the handle's reference must be done *after* we are done dereferencing the object.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer There are 3 possible interrupt sources are handled by DP controller, HPDstatus, Controller state changes and Aux read/write transaction. At every irq, DP controller have to check isr status of every interrupt sources and service the interrupt if its isr status bits shows interrupts are pending. There is potential race condition may happen at current aux isr handler implementation since it is always complete dp_aux_cmd_fifo_tx() even irq is not for aux read or write transaction. This may cause aux read transaction return premature if host aux data read is in the middle of waiting for sink to complete transferring data to host while irq happen. This will cause host's receiving buffer contains unexpected data. This patch fixes this problem by checking aux isr and return immediately at aux isr handler if there are no any isr status bits set. Current there is a bug report regrading eDP edid corruption happen during system booting up. After lengthy debugging to found that VIDEO_READY interrupt was continuously firing during system booting up which cause dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data from aux hardware buffer which is not yet contains complete data transfer from sink. This cause edid corruption. Follows are the signature at kernel logs when problem happen, EDID has corrupt header panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID Changes in v2: -- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr() -- add more commit text Changes in v3: -- add Stephen suggested -- dp_aux_isr() return IRQ_XXX back to caller -- dp_ctrl_isr() return IRQ_XXX back to caller Changes in v4: -- split into two patches Changes in v5: -- delete empty line between tags Changes in v6: -- remove extra "that" and fixed line more than 75 char at commit text Patchwork: https://patchwork.freedesktop.org/patch/516121/

In the Linux kernel, the following vulnerability has been resolved: arm64/mm: fix incorrect file_map_count for invalid pmd The page table check trigger BUG_ON() unexpectedly when split hugepage: ------------[ cut here ]------------ kernel BUG at mm/page_table_check.c:119! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 7 PID: 210 Comm: transhuge-stres Not tainted 6.1.0-rc3+ #748 Hardware name: linux,dummy-virt (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : page_table_check_set.isra.0+0x398/0x468 lr : page_table_check_set.isra.0+0x1c0/0x468 [...] Call trace: page_table_check_set.isra.0+0x398/0x468 __page_table_check_pte_set+0x160/0x1c0 __split_huge_pmd_locked+0x900/0x1648 __split_huge_pmd+0x28c/0x3b8 unmap_page_range+0x428/0x858 unmap_single_vma+0xf4/0x1c8 zap_page_range+0x2b0/0x410 madvise_vma_behavior+0xc44/0xe78 do_madvise+0x280/0x698 __arm64_sys_madvise+0x90/0xe8 invoke_syscall.constprop.0+0xdc/0x1d8 do_el0_svc+0xf4/0x3f8 el0_svc+0x58/0x120 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x19c/0x1a0 [...] On arm64, pmd_leaf() will return true even if the pmd is invalid due to pmd_present_invalid() check. So in pmdp_invalidate() the file_map_count will not only decrease once but also increase once. Then in set_pte_at(), the file_map_count increase again, and so trigger BUG_ON() unexpectedly. Add !pmd_present_invalid() check in pmd_user_accessible_page() to fix the problem.

In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix pci device refcount leak As the comment of pci_get_domain_bus_and_slot() says, it returns a PCI device with refcount incremented, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(), pci_dev_put() is called to avoid leak.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Cleanup partial engine discovery failures If we abort driver initialisation in the middle of gt/engine discovery, some engines will be fully setup and some not. Those incompletely setup engines only have 'engine->release == NULL' and so will leak any of the common objects allocated. v2: - Drop the destroy_pinned_context() helper for now. It's not really worth it with just a single callsite at the moment. (Janusz)

In the Linux kernel, the following vulnerability has been resolved: sched/core: Fix use-after-free bug in dup_user_cpus_ptr() Since commit 07ec77a1d4e8 ("sched: Allow task CPU affinity to be restricted on asymmetric systems"), the setting and clearing of user_cpus_ptr are done under pi_lock for arm64 architecture. However, dup_user_cpus_ptr() accesses user_cpus_ptr without any lock protection. Since sched_setaffinity() can be invoked from another process, the process being modified may be undergoing fork() at the same time. When racing with the clearing of user_cpus_ptr in __set_cpus_allowed_ptr_locked(), it can lead to user-after-free and possibly double-free in arm64 kernel. Commit 8f9ea86fdf99 ("sched: Always preserve the user requested cpumask") fixes this problem as user_cpus_ptr, once set, will never be cleared in a task's lifetime. However, this bug was re-introduced in commit 851a723e45d1 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()") which allows the clearing of user_cpus_ptr in do_set_cpus_allowed(). This time, it will affect all arches. Fix this bug by always clearing the user_cpus_ptr of the newly cloned/forked task before the copying process starts and check the user_cpus_ptr state of the source task under pi_lock. Note to stable, this patch won't be applicable to stable releases. Just copy the new dup_user_cpus_ptr() function over.

In the Linux kernel, the following vulnerability has been resolved: regulator: da9211: Use irq handler when ready If the system does not come from reset (like when it is kexec()), the regulator might have an IRQ waiting for us. If we enable the IRQ handler before its structures are ready, we crash. This patch fixes: [ 1.141839] Unable to handle kernel read from unreadable memory at virtual address 0000000000000078 [ 1.316096] Call trace: [ 1.316101] blocking_notifier_call_chain+0x20/0xa8 [ 1.322757] cpu cpu0: dummy supplies not allowed for exclusive requests [ 1.327823] regulator_notifier_call_chain+0x1c/0x2c [ 1.327825] da9211_irq_handler+0x68/0xf8 [ 1.327829] irq_thread+0x11c/0x234 [ 1.327833] kthread+0x13c/0x154

In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM storvsc_queuecommand() maps the scatter/gather list using scsi_dma_map(), which in a confidential VM allocates swiotlb bounce buffers. If the I/O submission fails in storvsc_do_io(), the I/O is typically retried by higher level code, but the bounce buffer memory is never freed. The mostly like cause of I/O submission failure is a full VMBus channel ring buffer, which is not uncommon under high I/O loads. Eventually enough bounce buffer memory leaks that the confidential VM can't do any I/O. The same problem can arise in a non-confidential VM with kernel boot parameter swiotlb=force. Fix this by doing scsi_dma_unmap() in the case of an I/O submission error, which frees the bounce buffer memory.

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof-nau8825: fix module alias overflow The maximum name length for a platform_device_id entry is 20 characters including the trailing NUL byte. The sof_nau8825.c file exceeds that, which causes an obscure error message: sound/soc/intel/boards/snd-soc-sof_nau8825.mod.c:35:45: error: illegal character encoding in string literal [-Werror,-Winvalid-source-encoding] MODULE_ALIAS("platform:adl_max98373_nau8825<U+0018><AA>"); ^~~~ include/linux/module.h:168:49: note: expanded from macro 'MODULE_ALIAS' ^~~~~~ include/linux/module.h:165:56: note: expanded from macro 'MODULE_INFO' ^~~~ include/linux/moduleparam.h:26:47: note: expanded from macro '__MODULE_INFO' = __MODULE_INFO_PREFIX __stringify(tag) "=" info I could not figure out how to make the module handling robust enough to handle this better, but as a quick fix, using slightly shorter names that are still unique avoids the build issue.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Fix memory leak in msm_mdss_parse_data_bus_icc_path of_icc_get() alloc resources for path1, we should release it when not need anymore. Early return when IS_ERR_OR_NULL(path0) may leak path1. Defer getting path1 to fix this. Patchwork: https://patchwork.freedesktop.org/patch/514264/

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Remove rcu locks from user resources User resource lookups used rcu to avoid two extra atomics. Unfortunately the rcu paths were buggy and it was easy to make the driver crash by submitting command buffers from two different threads. Because the lookups never show up in performance profiles replace them with a regular spin lock which fixes the races in accesses to those shared resources. Fixes kernel oops'es in IGT's vmwgfx execution_buffer stress test and seen crashes with apps using shared resources.

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: Fix refcount leak in amd_pmc_probe pci_get_domain_bus_and_slot() takes reference, the caller should release the reference by calling pci_dev_put() after use. Call pci_dev_put() in the error path to fix this.

In the Linux kernel, the following vulnerability has been resolved: efi: fix NULL-deref in init error path In cases where runtime services are not supported or have been disabled, the runtime services workqueue will never have been allocated. Do not try to destroy the workqueue unconditionally in the unlikely event that EFI initialisation fails to avoid dereferencing a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Fix driver shutdown on closed serdev The driver shutdown callback (which sends EDL_SOC_RESET to the device over serdev) should not be invoked when HCI device is not open (e.g. if hci_dev_open_sync() failed), because the serdev and its TTY are not open either. Also skip this step if device is powered off (qca_power_shutdown()). The shutdown callback causes use-after-free during system reboot with Qualcomm Atheros Bluetooth: Unable to handle kernel paging request at virtual address 0072662f67726fd7 ... CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W 6.1.0-rt5-00325-g8a5f56bcfcca #8 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: tty_driver_flush_buffer+0x4/0x30 serdev_device_write_flush+0x24/0x34 qca_serdev_shutdown+0x80/0x130 [hci_uart] device_shutdown+0x15c/0x260 kernel_restart+0x48/0xac KASAN report: BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50 Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1 CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xdc/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x68/0x84 print_report+0x188/0x488 kasan_report+0xa4/0xf0 __asan_load8+0x80/0xac tty_driver_flush_buffer+0x1c/0x50 ttyport_write_flush+0x34/0x44 serdev_device_write_flush+0x48/0x60 qca_serdev_shutdown+0x124/0x274 device_shutdown+0x1e8/0x350 kernel_restart+0x48/0xb0 __do_sys_reboot+0x244/0x2d0 __arm64_sys_reboot+0x54/0x70 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x44/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xbc/0x140 el0t_64_sync+0x190/0x194

In the Linux kernel, the following vulnerability has been resolved: f2fs: let's avoid panic if extent_tree is not created This patch avoids the below panic. pc : __lookup_extent_tree+0xd8/0x760 lr : f2fs_do_write_data_page+0x104/0x87c sp : ffffffc010cbb3c0 x29: ffffffc010cbb3e0 x28: 0000000000000000 x27: ffffff8803e7f020 x26: ffffff8803e7ed40 x25: ffffff8803e7f020 x24: ffffffc010cbb460 x23: ffffffc010cbb480 x22: 0000000000000000 x21: 0000000000000000 x20: ffffffff22e90900 x19: 0000000000000000 x18: ffffffc010c5d080 x17: 0000000000000000 x16: 0000000000000020 x15: ffffffdb1acdbb88 x14: ffffff888759e2b0 x13: 0000000000000000 x12: ffffff802da49000 x11: 000000000a001200 x10: ffffff8803e7ed40 x9 : ffffff8023195800 x8 : ffffff802da49078 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0000000000000006 x4 : ffffffc010cbba28 x3 : 0000000000000000 x2 : ffffffc010cbb480 x1 : 0000000000000000 x0 : ffffff8803e7ed40 Call trace: __lookup_extent_tree+0xd8/0x760 f2fs_do_write_data_page+0x104/0x87c f2fs_write_single_data_page+0x420/0xb60 f2fs_write_cache_pages+0x418/0xb1c __f2fs_write_data_pages+0x428/0x58c f2fs_write_data_pages+0x30/0x40 do_writepages+0x88/0x190 __writeback_single_inode+0x48/0x448 writeback_sb_inodes+0x468/0x9e8 __writeback_inodes_wb+0xb8/0x2a4 wb_writeback+0x33c/0x740 wb_do_writeback+0x2b4/0x400 wb_workfn+0xe4/0x34c process_one_work+0x24c/0x5bc worker_thread+0x3e8/0xa50 kthread+0x150/0x1b4

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: sdata can be NULL during AMPDU start ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a deauthentication is ongoing. Here a trace triggering the race with the hostapd test multi_ap_fronthaul_on_ap: (gdb) list *drv_ampdu_action+0x46 0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396). 391 int ret = -EOPNOTSUPP; 392 393 might_sleep(); 394 395 sdata = get_bss_sdata(sdata); 396 if (!check_sdata_in_driver(sdata)) 397 return -EIO; 398 399 trace_drv_ampdu_action(local, sdata, params); 400 wlan0: moving STA 02:00:00:00:03:00 to state 3 wlan0: associated wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING) wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0 wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port) wlan0: moving STA 02:00:00:00:03:00 to state 2 wlan0: moving STA 02:00:00:00:03:00 to state 1 wlan0: Removed STA 02:00:00:00:03:00 wlan0: Destroyed STA 02:00:00:00:03:00 BUG: unable to handle page fault for address: fffffffffffffb48 PGD 11814067 P4D 11814067 PUD 11816067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G W 6.1.0-rc8-wt+ #59 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Workqueue: phy3 ieee80211_ba_session_work [mac80211] RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211] Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85 RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287 RAX: 0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240 RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40 RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0 R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8 FS: 0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0 Call Trace: <TASK> ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211] ieee80211_ba_session_work+0xff/0x2e0 [mac80211] process_one_work+0x29f/0x620 worker_thread+0x4d/0x3d0 ? process_one_work+0x620/0x620 kthread+0xfb/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix use-after-free and race in fastrpc_map_find Currently, there is a race window between the point when the mutex is unlocked in fastrpc_map_lookup and the reference count increasing (fastrpc_map_get) in fastrpc_map_find, which can also lead to use-after-free. So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us to both protect the maps list by also taking the &fl->lock spinlock and the reference count, since the spinlock will be released only after. Add take_ref argument to make this suitable for all callers.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Don't remove map on creater_process and device_release Do not remove the map from the list on error path in fastrpc_init_create_process, instead call fastrpc_map_put, to avoid use-after-free. Do not remove it on fastrpc_device_release either, call fastrpc_map_put instead. The fastrpc_free_map is the only proper place to remove the map. This is called only after the reference count is 0.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix use-after-free race condition for maps It is possible that in between calling fastrpc_map_get() until map->fl->lock is taken in fastrpc_free_map(), another thread can call fastrpc_map_lookup() and get a reference to a map that is about to be deleted. Rewrite fastrpc_map_get() to only increase the reference count of a map if it's non-zero. Propagate this to callers so they can know if a map is about to be deleted. Fixes this warning: refcount_t: addition on 0; use-after-free. WARNING: CPU: 5 PID: 10100 at lib/refcount.c:25 refcount_warn_saturate ... Call trace: refcount_warn_saturate [fastrpc_map_get inlined] [fastrpc_map_lookup inlined] fastrpc_map_create fastrpc_internal_invoke fastrpc_device_ioctl __arm64_sys_ioctl invoke_syscall

In the Linux kernel, the following vulnerability has been resolved: tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on default RX FIFO depth, e.g. 16. Later during serial startup the qcom_geni_serial_port_setup() updates the RX FIFO depth (port->rx_fifo_depth) to match real device capabilities, e.g. to 32. The RX UART handle code will read "port->rx_fifo_depth" number of words into "port->rx_fifo" buffer, thus exceeding the bounds. This can be observed in certain configurations with Qualcomm Bluetooth HCI UART device and KASAN: Bluetooth: hci0: QCA Product ID :0x00000010 Bluetooth: hci0: QCA SOC Version :0x400a0200 Bluetooth: hci0: QCA ROM Version :0x00000200 Bluetooth: hci0: QCA Patch Version:0x00000d2b Bluetooth: hci0: QCA controller version 0x02000200 Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2 Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2) Bluetooth: hci0: QCA Failed to download patch (-2) ================================================================== BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c Write of size 4 at addr ffff279347d578c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 print_report+0x188/0x488 kasan_report+0xb4/0x100 __asan_store4+0x80/0xa4 handle_rx_uart+0xa8/0x18c qcom_geni_serial_handle_rx+0x84/0x9c qcom_geni_serial_isr+0x24c/0x760 __handle_irq_event_percpu+0x108/0x500 handle_irq_event+0x6c/0x110 handle_fasteoi_irq+0x138/0x2cc generic_handle_domain_irq+0x48/0x64 If the RX FIFO depth changes after probe, be sure to resize the buffer.