In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Avoid address calculations via out of bounds array indexing req->n_channels must be set before req->channels[] can be used. This patch fixes one of the issues encountered in [1]. [ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4 [ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]' [...] [ 83.964264] Call Trace: [ 83.964267] <TASK> [ 83.964269] dump_stack_lvl+0x3f/0xc0 [ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110 [ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0 [ 83.964281] __ieee80211_start_scan+0x601/0x990 [ 83.964291] nl80211_trigger_scan+0x874/0x980 [ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160 [ 83.964298] genl_rcv_msg+0x240/0x270 [...] [1] https://bugzilla.kernel.org/show_bug.cgi?id=218810

In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group() Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group(). It looks up `stt` from tablefd, but then continues to use it after doing fdput() on the returned fd. After the fdput() the tablefd is free to be closed by another thread. The close calls kvm_spapr_tce_release() and then release_spapr_tce_table() (via call_rcu()) which frees `stt`. Although there are calls to rcu_read_lock() in kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent the UAF, because `stt` is used outside the locked regions. With an artifcial delay after the fdput() and a userspace program which triggers the race, KASAN detects the UAF: BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505 CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1 Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV Call Trace: dump_stack_lvl+0xb4/0x108 (unreliable) print_report+0x2b4/0x6ec kasan_report+0x118/0x2b0 __asan_load4+0xb8/0xd0 kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] kvm_vfio_set_attr+0x524/0xac0 [kvm] kvm_device_ioctl+0x144/0x240 [kvm] sys_ioctl+0x62c/0x1810 system_call_exception+0x190/0x440 system_call_vectored_common+0x15c/0x2ec ... Freed by task 0: ... kfree+0xec/0x3e0 release_spapr_tce_table+0xd4/0x11c [kvm] rcu_core+0x568/0x16a0 handle_softirqs+0x23c/0x920 do_softirq_own_stack+0x6c/0x90 do_softirq_own_stack+0x58/0x90 __irq_exit_rcu+0x218/0x2d0 irq_exit+0x30/0x80 arch_local_irq_restore+0x128/0x230 arch_local_irq_enable+0x1c/0x30 cpuidle_enter_state+0x134/0x5cc cpuidle_enter+0x6c/0xb0 call_cpuidle+0x7c/0x100 do_idle+0x394/0x410 cpu_startup_entry+0x60/0x70 start_secondary+0x3fc/0x410 start_secondary_prolog+0x10/0x14 Fix it by delaying the fdput() until `stt` is no longer in use, which is effectively the entire function. To keep the patch minimal add a call to fdput() at each of the existing return paths. Future work can convert the function to goto or __cleanup style cleanup. With the fix in place the test case no longer triggers the UAF.

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Add tx check to prevent skb leak Below is a summary of how the driver stores a reference to an skb during transmit: tx_buff[free_map[consumer_index]]->skb = new_skb; free_map[consumer_index] = IBMVNIC_INVALID_MAP; consumer_index ++; Where variable data looks like this: free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3] consumer_index^ tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null] The driver has checks to ensure that free_map[consumer_index] pointed to a valid index but there was no check to ensure that this index pointed to an unused/null skb address. So, if, by some chance, our free_map and tx_buff lists become out of sync then we were previously risking an skb memory leak. This could then cause tcp congestion control to stop sending packets, eventually leading to ETIMEDOUT. Therefore, add a conditional to ensure that the skb address is null. If not then warn the user (because this is still a bug that should be patched) and free the old pointer to prevent memleak/tcp problems.

In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: avoid possible crash when edev->pdev changes If a PCI device is removed during eeh_pe_report_edev(), edev->pdev will change and can cause a crash, hold the PCI rescan/remove lock while taking a copy of edev->pdev->bus.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: cancel all works upon hci_unregister_dev() syzbot is reporting that calling hci_release_dev() from hci_error_reset() due to hci_dev_put() from hci_error_reset() can cause deadlock at destroy_workqueue(), for hci_error_reset() is called from hdev->req_workqueue which destroy_workqueue() needs to flush. We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are queued into hdev->workqueue and hdev->{power_on,error_reset} which are queued into hdev->req_workqueue are no longer running by the moment destroy_workqueue(hdev->workqueue); destroy_workqueue(hdev->req_workqueue); are called from hci_release_dev(). Call cancel_work_sync() on these work items from hci_unregister_dev() as soon as hdev->list is removed from hci_dev_list.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport [Why] Potential out of bounds access in dml2_calculate_rq_and_dlg_params() because the value of out_lowest_state_idx used as an index for FCLKChangeSupport array can be greater than 1. [How] Currently dml2 core specifies identical values for all FCLKChangeSupport elements. Always use index 0 in the condition to avoid out of bounds access.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: check bo_va->bo is non-NULL before using it The call to radeon_vm_clear_freed might clear bo_va->bo, so we have to check it before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix uninit-value in copy_name [syzbot reported] BUG: KMSAN: uninit-value in sized_strscpy+0xc4/0x160 sized_strscpy+0xc4/0x160 copy_name+0x2af/0x320 fs/hfsplus/xattr.c:411 hfsplus_listxattr+0x11e9/0x1a50 fs/hfsplus/xattr.c:750 vfs_listxattr fs/xattr.c:493 [inline] listxattr+0x1f3/0x6b0 fs/xattr.c:840 path_listxattr fs/xattr.c:864 [inline] __do_sys_listxattr fs/xattr.c:876 [inline] __se_sys_listxattr fs/xattr.c:873 [inline] __x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873 x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3877 [inline] slab_alloc_node mm/slub.c:3918 [inline] kmalloc_trace+0x57b/0xbe0 mm/slub.c:4065 kmalloc include/linux/slab.h:628 [inline] hfsplus_listxattr+0x4cc/0x1a50 fs/hfsplus/xattr.c:699 vfs_listxattr fs/xattr.c:493 [inline] listxattr+0x1f3/0x6b0 fs/xattr.c:840 path_listxattr fs/xattr.c:864 [inline] __do_sys_listxattr fs/xattr.c:876 [inline] __se_sys_listxattr fs/xattr.c:873 [inline] __x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873 x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Fix] When allocating memory to strbuf, initialize memory to 0.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in fscache_withdraw_volume() We got the following issue in our fault injection stress test: ================================================================== BUG: KASAN: slab-use-after-free in fscache_withdraw_volume+0x2e1/0x370 Read of size 4 at addr ffff88810680be08 by task ondemand-04-dae/5798 CPU: 0 PID: 5798 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #565 Call Trace: kasan_check_range+0xf6/0x1b0 fscache_withdraw_volume+0x2e1/0x370 cachefiles_withdraw_volume+0x31/0x50 cachefiles_withdraw_cache+0x3ad/0x900 cachefiles_put_unbind_pincount+0x1f6/0x250 cachefiles_daemon_release+0x13b/0x290 __fput+0x204/0xa00 task_work_run+0x139/0x230 Allocated by task 5820: __kmalloc+0x1df/0x4b0 fscache_alloc_volume+0x70/0x600 __fscache_acquire_volume+0x1c/0x610 erofs_fscache_register_volume+0x96/0x1a0 erofs_fscache_register_fs+0x49a/0x690 erofs_fc_fill_super+0x6c0/0xcc0 vfs_get_super+0xa9/0x140 vfs_get_tree+0x8e/0x300 do_new_mount+0x28c/0x580 [...] Freed by task 5820: kfree+0xf1/0x2c0 fscache_put_volume.part.0+0x5cb/0x9e0 erofs_fscache_unregister_fs+0x157/0x1b0 erofs_kill_sb+0xd9/0x1c0 deactivate_locked_super+0xa3/0x100 vfs_get_super+0x105/0x140 vfs_get_tree+0x8e/0x300 do_new_mount+0x28c/0x580 [...] ================================================================== Following is the process that triggers the issue: mount failed | daemon exit ------------------------------------------------------------ deactivate_locked_super cachefiles_daemon_release erofs_kill_sb erofs_fscache_unregister_fs fscache_relinquish_volume __fscache_relinquish_volume fscache_put_volume(fscache_volume, fscache_volume_put_relinquish) zero = __refcount_dec_and_test(&fscache_volume->ref, &ref); cachefiles_put_unbind_pincount cachefiles_daemon_unbind cachefiles_withdraw_cache cachefiles_withdraw_volumes list_del_init(&volume->cache_link) fscache_free_volume(fscache_volume) cache->ops->free_volume cachefiles_free_volume list_del_init(&cachefiles_volume->cache_link); kfree(fscache_volume) cachefiles_withdraw_volume fscache_withdraw_volume fscache_volume->n_accesses // fscache_volume UAF !!! The fscache_volume in cache->volumes must not have been freed yet, but its reference count may be 0. So use the new fscache_try_get_volume() helper function try to get its reference count. If the reference count of fscache_volume is 0, fscache_put_volume() is freeing it, so wait for it to be removed from cache->volumes. If its reference count is not 0, call cachefiles_withdraw_volume() with reference count protection to avoid the above issue.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie() We got the following issue in our fault injection stress test: ================================================================== BUG: KASAN: slab-use-after-free in cachefiles_withdraw_cookie+0x4d9/0x600 Read of size 8 at addr ffff888118efc000 by task kworker/u78:0/109 CPU: 13 PID: 109 Comm: kworker/u78:0 Not tainted 6.8.0-dirty #566 Call Trace: <TASK> kasan_report+0x93/0xc0 cachefiles_withdraw_cookie+0x4d9/0x600 fscache_cookie_state_machine+0x5c8/0x1230 fscache_cookie_worker+0x91/0x1c0 process_one_work+0x7fa/0x1800 [...] Allocated by task 117: kmalloc_trace+0x1b3/0x3c0 cachefiles_acquire_volume+0xf3/0x9c0 fscache_create_volume_work+0x97/0x150 process_one_work+0x7fa/0x1800 [...] Freed by task 120301: kfree+0xf1/0x2c0 cachefiles_withdraw_cache+0x3fa/0x920 cachefiles_put_unbind_pincount+0x1f6/0x250 cachefiles_daemon_release+0x13b/0x290 __fput+0x204/0xa00 task_work_run+0x139/0x230 do_exit+0x87a/0x29b0 [...] ================================================================== Following is the process that triggers the issue: p1 | p2 ------------------------------------------------------------ fscache_begin_lookup fscache_begin_volume_access fscache_cache_is_live(fscache_cache) cachefiles_daemon_release cachefiles_put_unbind_pincount cachefiles_daemon_unbind cachefiles_withdraw_cache fscache_withdraw_cache fscache_set_cache_state(cache, FSCACHE_CACHE_IS_WITHDRAWN); cachefiles_withdraw_objects(cache) fscache_wait_for_objects(fscache) atomic_read(&fscache_cache->object_count) == 0 fscache_perform_lookup cachefiles_lookup_cookie cachefiles_alloc_object refcount_set(&object->ref, 1); object->volume = volume fscache_count_object(vcookie->cache); atomic_inc(&fscache_cache->object_count) cachefiles_withdraw_volumes cachefiles_withdraw_volume fscache_withdraw_volume __cachefiles_free_volume kfree(cachefiles_volume) fscache_cookie_state_machine cachefiles_withdraw_cookie cache = object->volume->cache; // cachefiles_volume UAF !!! After setting FSCACHE_CACHE_IS_WITHDRAWN, wait for all the cookie lookups to complete first, and then wait for fscache_cache->object_count == 0 to avoid the cookie exiting after the volume has been freed and triggering the above issue. Therefore call fscache_withdraw_volume() before calling cachefiles_withdraw_objects(). This way, after setting FSCACHE_CACHE_IS_WITHDRAWN, only the following two cases will occur: 1) fscache_begin_lookup fails in fscache_begin_volume_access(). 2) fscache_withdraw_volume() will ensure that fscache_count_object() has been executed before calling fscache_wait_for_objects().

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: lantiq_etop: fix double free in detach The number of the currently released descriptor is never incremented which results in the same skb being released multiple times.

In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix UAF when resolving a clash KASAN reports the following UAF: BUG: KASAN: slab-use-after-free in tcf_ct_flow_table_process_conn+0x12b/0x380 [act_ct] Read of size 1 at addr ffff888c07603600 by task handler130/6469 Call Trace: <IRQ> dump_stack_lvl+0x48/0x70 print_address_description.constprop.0+0x33/0x3d0 print_report+0xc0/0x2b0 kasan_report+0xd0/0x120 __asan_load1+0x6c/0x80 tcf_ct_flow_table_process_conn+0x12b/0x380 [act_ct] tcf_ct_act+0x886/0x1350 [act_ct] tcf_action_exec+0xf8/0x1f0 fl_classify+0x355/0x360 [cls_flower] __tcf_classify+0x1fd/0x330 tcf_classify+0x21c/0x3c0 sch_handle_ingress.constprop.0+0x2c5/0x500 __netif_receive_skb_core.constprop.0+0xb25/0x1510 __netif_receive_skb_list_core+0x220/0x4c0 netif_receive_skb_list_internal+0x446/0x620 napi_complete_done+0x157/0x3d0 gro_cell_poll+0xcf/0x100 __napi_poll+0x65/0x310 net_rx_action+0x30c/0x5c0 __do_softirq+0x14f/0x491 __irq_exit_rcu+0x82/0xc0 irq_exit_rcu+0xe/0x20 common_interrupt+0xa1/0xb0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 Allocated by task 6469: kasan_save_stack+0x38/0x70 kasan_set_track+0x25/0x40 kasan_save_alloc_info+0x1e/0x40 __kasan_krealloc+0x133/0x190 krealloc+0xaa/0x130 nf_ct_ext_add+0xed/0x230 [nf_conntrack] tcf_ct_act+0x1095/0x1350 [act_ct] tcf_action_exec+0xf8/0x1f0 fl_classify+0x355/0x360 [cls_flower] __tcf_classify+0x1fd/0x330 tcf_classify+0x21c/0x3c0 sch_handle_ingress.constprop.0+0x2c5/0x500 __netif_receive_skb_core.constprop.0+0xb25/0x1510 __netif_receive_skb_list_core+0x220/0x4c0 netif_receive_skb_list_internal+0x446/0x620 napi_complete_done+0x157/0x3d0 gro_cell_poll+0xcf/0x100 __napi_poll+0x65/0x310 net_rx_action+0x30c/0x5c0 __do_softirq+0x14f/0x491 Freed by task 6469: kasan_save_stack+0x38/0x70 kasan_set_track+0x25/0x40 kasan_save_free_info+0x2b/0x60 ____kasan_slab_free+0x180/0x1f0 __kasan_slab_free+0x12/0x30 slab_free_freelist_hook+0xd2/0x1a0 __kmem_cache_free+0x1a2/0x2f0 kfree+0x78/0x120 nf_conntrack_free+0x74/0x130 [nf_conntrack] nf_ct_destroy+0xb2/0x140 [nf_conntrack] __nf_ct_resolve_clash+0x529/0x5d0 [nf_conntrack] nf_ct_resolve_clash+0xf6/0x490 [nf_conntrack] __nf_conntrack_confirm+0x2c6/0x770 [nf_conntrack] tcf_ct_act+0x12ad/0x1350 [act_ct] tcf_action_exec+0xf8/0x1f0 fl_classify+0x355/0x360 [cls_flower] __tcf_classify+0x1fd/0x330 tcf_classify+0x21c/0x3c0 sch_handle_ingress.constprop.0+0x2c5/0x500 __netif_receive_skb_core.constprop.0+0xb25/0x1510 __netif_receive_skb_list_core+0x220/0x4c0 netif_receive_skb_list_internal+0x446/0x620 napi_complete_done+0x157/0x3d0 gro_cell_poll+0xcf/0x100 __napi_poll+0x65/0x310 net_rx_action+0x30c/0x5c0 __do_softirq+0x14f/0x491 The ct may be dropped if a clash has been resolved but is still passed to the tcf_ct_flow_table_process_conn function for further usage. This issue can be fixed by retrieving ct from skb again after confirming conntrack.

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix overflow checking of wmfw header Fix the checking that firmware file buffer is large enough for the wmfw header, to prevent overrunning the buffer. The original code tested that the firmware data buffer contained enough bytes for the sums of the size of the structs wmfw_header + wmfw_adsp1_sizes + wmfw_footer But wmfw_adsp1_sizes is only used on ADSP1 firmware. For ADSP2 and Halo Core the equivalent struct is wmfw_adsp2_sizes, which is 4 bytes longer. So the length check didn't guarantee that there are enough bytes in the firmware buffer for a header with wmfw_adsp2_sizes. This patch splits the length check into three separate parts. Each of the wmfw_header, wmfw_adsp?_sizes and wmfw_footer are checked separately before they are used.

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers Check that all fields of a V2 algorithm header fit into the available firmware data buffer. The wmfw V2 format introduced variable-length strings in the algorithm block header. This means the overall header length is variable, and the position of most fields varies depending on the length of the string fields. Each field must be checked to ensure that it does not overflow the firmware data buffer. As this ia bugfix patch, the fixes avoid making any significant change to the existing code. This makes it easier to review and less likely to introduce new bugs.

In the Linux kernel, the following vulnerability has been resolved: filelock: Remove locks reliably when fcntl/close race is detected When fcntl_setlk() races with close(), it removes the created lock with do_lock_file_wait(). However, LSMs can allow the first do_lock_file_wait() that created the lock while denying the second do_lock_file_wait() that tries to remove the lock. Separately, posix_lock_file() could also fail to remove a lock due to GFP_KERNEL allocation failure (when splitting a range in the middle). After the bug has been triggered, use-after-free reads will occur in lock_get_status() when userspace reads /proc/locks. This can likely be used to read arbitrary kernel memory, but can't corrupt kernel memory. Fix it by calling locks_remove_posix() instead, which is designed to reliably get rid of POSIX locks associated with the given file and files_struct and is also used by filp_flush().

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: don't allow mapping the MMIO HDP page with large pages We don't get the right offset in that case. The GPU has an unused 4K area of the register BAR space into which you can remap registers. We remap the HDP flush registers into this space to allow userspace (CPU or GPU) to flush the HDP when it updates VRAM. However, on systems with >4K pages, we end up exposing PAGE_SIZE of MMIO space.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overrunning reservations in ringbuf The BPF ring buffer internally is implemented as a power-of-2 sized circular buffer, with two logical and ever-increasing counters: consumer_pos is the consumer counter to show which logical position the consumer consumed the data, and producer_pos which is the producer counter denoting the amount of data reserved by all producers. Each time a record is reserved, the producer that "owns" the record will successfully advance producer counter. In user space each time a record is read, the consumer of the data advanced the consumer counter once it finished processing. Both counters are stored in separate pages so that from user space, the producer counter is read-only and the consumer counter is read-write. One aspect that simplifies and thus speeds up the implementation of both producers and consumers is how the data area is mapped twice contiguously back-to-back in the virtual memory, allowing to not take any special measures for samples that have to wrap around at the end of the circular buffer data area, because the next page after the last data page would be first data page again, and thus the sample will still appear completely contiguous in virtual memory. Each record has a struct bpf_ringbuf_hdr { u32 len; u32 pg_off; } header for book-keeping the length and offset, and is inaccessible to the BPF program. Helpers like bpf_ringbuf_reserve() return `(void *)hdr + BPF_RINGBUF_HDR_SZ` for the BPF program to use. Bing-Jhong and Muhammad reported that it is however possible to make a second allocated memory chunk overlapping with the first chunk and as a result, the BPF program is now able to edit first chunk's header. For example, consider the creation of a BPF_MAP_TYPE_RINGBUF map with size of 0x4000. Next, the consumer_pos is modified to 0x3000 /before/ a call to bpf_ringbuf_reserve() is made. This will allocate a chunk A, which is in [0x0,0x3008], and the BPF program is able to edit [0x8,0x3008]. Now, lets allocate a chunk B with size 0x3000. This will succeed because consumer_pos was edited ahead of time to pass the `new_prod_pos - cons_pos > rb->mask` check. Chunk B will be in range [0x3008,0x6010], and the BPF program is able to edit [0x3010,0x6010]. Due to the ring buffer memory layout mentioned earlier, the ranges [0x0,0x4000] and [0x4000,0x8000] point to the same data pages. This means that chunk B at [0x4000,0x4008] is chunk A's header. bpf_ringbuf_submit() / bpf_ringbuf_discard() use the header's pg_off to then locate the bpf_ringbuf itself via bpf_ringbuf_restore_from_rec(). Once chunk B modified chunk A's header, then bpf_ringbuf_commit() refers to the wrong page and could cause a crash. Fix it by calculating the oldest pending_pos and check whether the range from the oldest outstanding record to the newest would span beyond the ring buffer size. If that is the case, then reject the request. We've tested with the ring buffer benchmark in BPF selftests (./benchs/run_bench_ringbufs.sh) before/after the fix and while it seems a bit slower on some benchmarks, it is still not significantly enough to matter.

In the Linux kernel, the following vulnerability has been resolved: tcp: avoid too many retransmit packets If a TCP socket is using TCP_USER_TIMEOUT, and the other peer retracted its window to zero, tcp_retransmit_timer() can retransmit a packet every two jiffies (2 ms for HZ=1000), for about 4 minutes after TCP_USER_TIMEOUT has 'expired'. The fix is to make sure tcp_rtx_probe0_timed_out() takes icsk->icsk_user_timeout into account. Before blamed commit, the socket would not timeout after icsk->icsk_user_timeout, but would use standard exponential backoff for the retransmits. Also worth noting that before commit e89688e3e978 ("net: tcp: fix unexcepted socket die when snd_wnd is 0"), the issue would last 2 minutes instead of 4.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix UAF in svc_tcp_listen_data_ready() After the listener svc_sock is freed, and before invoking svc_tcp_accept() for the established child sock, there is a window that the newsock retaining a freed listener svc_sock in sk_user_data which cloning from parent. In the race window, if data is received on the newsock, we will observe use-after-free report in svc_tcp_listen_data_ready(). Reproduce by two tasks: 1. while :; do rpc.nfsd 0 ; rpc.nfsd; done 2. while :; do echo "" | ncat -4 127.0.0.1 2049 ; done KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc] Read of size 8 at addr ffff888139d96228 by task nc/102553 CPU: 7 PID: 102553 Comm: nc Not tainted 6.3.0+ #18 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: <IRQ> dump_stack_lvl+0x33/0x50 print_address_description.constprop.0+0x27/0x310 print_report+0x3e/0x70 kasan_report+0xae/0xe0 svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc] tcp_data_queue+0x9f4/0x20e0 tcp_rcv_established+0x666/0x1f60 tcp_v4_do_rcv+0x51c/0x850 tcp_v4_rcv+0x23fc/0x2e80 ip_protocol_deliver_rcu+0x62/0x300 ip_local_deliver_finish+0x267/0x350 ip_local_deliver+0x18b/0x2d0 ip_rcv+0x2fb/0x370 __netif_receive_skb_one_core+0x166/0x1b0 process_backlog+0x24c/0x5e0 __napi_poll+0xa2/0x500 net_rx_action+0x854/0xc90 __do_softirq+0x1bb/0x5de do_softirq+0xcb/0x100 </IRQ> <TASK> ... </TASK> Allocated by task 102371: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x7b/0x90 svc_setup_socket+0x52/0x4f0 [sunrpc] svc_addsock+0x20d/0x400 [sunrpc] __write_ports_addfd+0x209/0x390 [nfsd] write_ports+0x239/0x2c0 [nfsd] nfsctl_transaction_write+0xac/0x110 [nfsd] vfs_write+0x1c3/0xae0 ksys_write+0xed/0x1c0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 102551: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x50 __kasan_slab_free+0x106/0x190 __kmem_cache_free+0x133/0x270 svc_xprt_free+0x1e2/0x350 [sunrpc] svc_xprt_destroy_all+0x25a/0x440 [sunrpc] nfsd_put+0x125/0x240 [nfsd] nfsd_svc+0x2cb/0x3c0 [nfsd] write_threads+0x1ac/0x2a0 [nfsd] nfsctl_transaction_write+0xac/0x110 [nfsd] vfs_write+0x1c3/0xae0 ksys_write+0xed/0x1c0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix the UAF by simply doing nothing in svc_tcp_listen_data_ready() if state != TCP_LISTEN, that will avoid dereferencing svsk for all child socket.

In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec - Fix memory leak for sec resource release The AIV is one of the SEC resources. When releasing resources, it need to release the AIV resources at the same time. Otherwise, memory leakage occurs. The aiv resource release is added to the sec resource release function.