Search Results (Refine Search)
- Results Type: Overview
- Keyword (text search): cpe:2.3:o:linux:linux_kernel:5.4.21:*:*:*:*:*:*:*
- CPE Name Search: true
Vuln ID | Summary | CVSS Severity |
---|---|---|
CVE-2024-42246 |
In the Linux kernel, the following vulnerability has been resolved: net, sunrpc: Remap EPERM in case of connection failure in xs_tcp_setup_socket When using a BPF program on kernel_connect(), the call can return -EPERM. This causes xs_tcp_setup_socket() to loop forever, filling up the syslog and causing the kernel to potentially freeze up. Neil suggested: This will propagate -EPERM up into other layers which might not be ready to handle it. It might be safer to map EPERM to an error we would be more likely to expect from the network system - such as ECONNREFUSED or ENETDOWN. ECONNREFUSED as error seems reasonable. For programs setting a different error can be out of reach (see handling in 4fbac77d2d09) in particular on kernels which do not have f10d05966196 ("bpf: Make BPF_PROG_RUN_ARRAY return -err instead of allow boolean"), thus given that it is better to simply remap for consistent behavior. UDP does handle EPERM in xs_udp_send_request(). Published: August 07, 2024; 12:15:47 PM -0400 |
V4.0:(not available) V3.1: 5.5 MEDIUM V2.0:(not available) |
CVE-2024-42244 |
In the Linux kernel, the following vulnerability has been resolved: USB: serial: mos7840: fix crash on resume Since commit c49cfa917025 ("USB: serial: use generic method if no alternative is provided in usb serial layer"), USB serial core calls the generic resume implementation when the driver has not provided one. This can trigger a crash on resume with mos7840 since support for multiple read URBs was added back in 2011. Specifically, both port read URBs are now submitted on resume for open ports, but the context pointer of the second URB is left set to the core rather than mos7840 port structure. Fix this by implementing dedicated suspend and resume functions for mos7840. Tested with Delock 87414 USB 2.0 to 4x serial adapter. [ johan: analyse crash and rewrite commit message; set busy flag on resume; drop bulk-in check; drop unnecessary usb_kill_urb() ] Published: August 07, 2024; 12:15:47 PM -0400 |
V4.0:(not available) V3.1: 5.5 MEDIUM V2.0:(not available) |
CVE-2024-42237 |
In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Validate payload length before processing block Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load() to be done before the block is processed. The check that the length of a block payload does not exceed the number of remaining bytes in the firwmware file buffer was being done near the end of the loop iteration. However, some code before that check used the length field without validating it. Published: August 07, 2024; 12:15:46 PM -0400 |
V4.0:(not available) V3.1: 5.5 MEDIUM V2.0:(not available) |
CVE-2024-42236 |
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: configfs: Prevent OOB read/write in usb_string_copy() Userspace provided string 's' could trivially have the length zero. Left unchecked this will firstly result in an OOB read in the form `if (str[0 - 1] == '\n') followed closely by an OOB write in the form `str[0 - 1] = '\0'`. There is already a validating check to catch strings that are too long. Let's supply an additional check for invalid strings that are too short. Published: August 07, 2024; 12:15:46 PM -0400 |
V4.0:(not available) V3.1: 5.5 MEDIUM V2.0:(not available) |
CVE-2024-42232 |
In the Linux kernel, the following vulnerability has been resolved: libceph: fix race between delayed_work() and ceph_monc_stop() The way the delayed work is handled in ceph_monc_stop() is prone to races with mon_fault() and possibly also finish_hunting(). Both of these can requeue the delayed work which wouldn't be canceled by any of the following code in case that happens after cancel_delayed_work_sync() runs -- __close_session() doesn't mess with the delayed work in order to avoid interfering with the hunting interval logic. This part was missed in commit b5d91704f53e ("libceph: behave in mon_fault() if cur_mon < 0") and use-after-free can still ensue on monc and objects that hang off of it, with monc->auth and monc->monmap being particularly susceptible to quickly being reused. To fix this: - clear monc->cur_mon and monc->hunting as part of closing the session in ceph_monc_stop() - bail from delayed_work() if monc->cur_mon is cleared, similar to how it's done in mon_fault() and finish_hunting() (based on monc->hunting) - call cancel_delayed_work_sync() after the session is closed Published: August 07, 2024; 12:15:46 PM -0400 |
V4.0:(not available) V3.1: 5.5 MEDIUM V2.0:(not available) |
CVE-2024-42229 |
In the Linux kernel, the following vulnerability has been resolved: crypto: aead,cipher - zeroize key buffer after use I.G 9.7.B for FIPS 140-3 specifies that variables temporarily holding cryptographic information should be zeroized once they are no longer needed. Accomplish this by using kfree_sensitive for buffers that previously held the private key. Published: July 30, 2024; 4:15:08 AM -0400 |
V4.0:(not available) V3.1: 4.1 MEDIUM V2.0:(not available) |
CVE-2024-42228 |
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Using uninitialized value *size when calling amdgpu_vce_cs_reloc Initialize the size before calling amdgpu_vce_cs_reloc, such as case 0x03000001. V2: To really improve the handling we would actually need to have a separate value of 0xffffffff.(Christian) Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 7.0 HIGH V2.0:(not available) |
CVE-2024-42227 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix overlapping copy within dml_core_mode_programming [WHY] &mode_lib->mp.Watermark and &locals->Watermark are the same address. memcpy may lead to unexpected behavior. [HOW] memmove should be used. Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 4.7 MEDIUM V2.0:(not available) |
CVE-2024-42225 |
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: replace skb_put with skb_put_zero Avoid potentially reusing uninitialized data Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 7.5 HIGH V2.0:(not available) |
CVE-2024-42224 |
In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: Correct check for empty list Since commit a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") mv88e6xxx_default_mdio_bus() has checked that the return value of list_first_entry() is non-NULL. This appears to be intended to guard against the list chip->mdios being empty. However, it is not the correct check as the implementation of list_first_entry is not designed to return NULL for empty lists. Instead, use list_first_entry_or_null() which does return NULL if the list is empty. Flagged by Smatch. Compile tested only. Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 7.8 HIGH V2.0:(not available) |
CVE-2024-42223 |
In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: tda10048: Fix integer overflow state->xtal_hz can be up to 16M, so it can overflow a 32 bit integer when multiplied by pll_mfactor. Create a new 64 bit variable to hold the calculations. Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 5.5 MEDIUM V2.0:(not available) |
CVE-2024-42162 |
In the Linux kernel, the following vulnerability has been resolved: gve: Account for stopped queues when reading NIC stats We now account for the fact that the NIC might send us stats for a subset of queues. Without this change, gve_get_ethtool_stats might make an invalid access on the priv->stats_report->stats array. Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 7.0 HIGH V2.0:(not available) |
CVE-2024-42161 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid uninitialized value in BPF_CORE_READ_BITFIELD [Changes from V1: - Use a default branch in the switch statement to initialize `val'.] GCC warns that `val' may be used uninitialized in the BPF_CRE_READ_BITFIELD macro, defined in bpf_core_read.h as: [...] unsigned long long val; \ [...] \ switch (__CORE_RELO(s, field, BYTE_SIZE)) { \ case 1: val = *(const unsigned char *)p; break; \ case 2: val = *(const unsigned short *)p; break; \ case 4: val = *(const unsigned int *)p; break; \ case 8: val = *(const unsigned long long *)p; break; \ } \ [...] val; \ } \ This patch adds a default entry in the switch statement that sets `val' to zero in order to avoid the warning, and random values to be used in case __builtin_preserve_field_info returns unexpected values for BPF_FIELD_BYTE_SIZE. Tested in bpf-next master. No regressions. Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 7.8 HIGH V2.0:(not available) |
CVE-2024-42160 |
In the Linux kernel, the following vulnerability has been resolved: f2fs: check validation of fault attrs in f2fs_build_fault_attr() - It missed to check validation of fault attrs in parse_options(), let's fix to add check condition in f2fs_build_fault_attr(). - Use f2fs_build_fault_attr() in __sbi_store() to clean up code. Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 7.8 HIGH V2.0:(not available) |
CVE-2024-42159 |
In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Sanitise num_phys Information is stored in mr_sas_port->phy_mask, values larger then size of this field shouldn't be allowed. Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 7.8 HIGH V2.0:(not available) |
CVE-2024-42158 |
In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Use kfree_sensitive() to fix Coccinelle warnings Replace memzero_explicit() and kfree() with kfree_sensitive() to fix warnings reported by Coccinelle: WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1506) WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1643) WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1770) Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 4.1 MEDIUM V2.0:(not available) |
CVE-2024-42157 |
In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Wipe sensitive data on failure Wipe sensitive data from stack also if the copy_to_user() fails. Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 4.1 MEDIUM V2.0:(not available) |
CVE-2024-42156 |
In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Wipe copies of clear-key structures on failure Wipe all sensitive data from stack for all IOCTLs, which convert a clear-key into a protected- or secure-key. Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 4.1 MEDIUM V2.0:(not available) |
CVE-2024-42155 |
In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Wipe copies of protected- and secure-keys Although the clear-key of neither protected- nor secure-keys is accessible, this key material should only be visible to the calling process. So wipe all copies of protected- or secure-keys from stack, even in case of an error. Published: July 30, 2024; 4:15:07 AM -0400 |
V4.0:(not available) V3.1: 1.9 LOW V2.0:(not available) |
CVE-2024-42154 |
In the Linux kernel, the following vulnerability has been resolved: tcp_metrics: validate source addr length I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4 is at least 4 bytes long, and the policy doesn't have an entry for this attribute at all (neither does it for IPv6 but v6 is manually validated). Published: July 30, 2024; 4:15:06 AM -0400 |
V4.0:(not available) V3.1: 9.8 CRITICAL V2.0:(not available) |