In the Linux kernel, the following vulnerability has been resolved: kdb: Fix buffer overflow during tab-complete Currently, when the user attempts symbol completion with the Tab key, kdb will use strncpy() to insert the completed symbol into the command buffer. Unfortunately it passes the size of the source buffer rather than the destination to strncpy() with predictably horrible results. Most obviously if the command buffer is already full but cp, the cursor position, is in the middle of the buffer, then we will write past the end of the supplied buffer. Fix this by replacing the dubious strncpy() calls with memmove()/memcpy() calls plus explicit boundary checks to make sure we have enough space before we start moving characters around.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/hwmon: Get rid of devm When both hwmon and hwmon drvdata (on which hwmon depends) are device managed resources, the expectation, on device unbind, is that hwmon will be released before drvdata. However, in i915 there are two separate code paths, which both release either drvdata or hwmon and either can be released before the other. These code paths (for device unbind) are as follows (see also the bug referenced below): Call Trace: release_nodes+0x11/0x70 devres_release_group+0xb2/0x110 component_unbind_all+0x8d/0xa0 component_del+0xa5/0x140 intel_pxp_tee_component_fini+0x29/0x40 [i915] intel_pxp_fini+0x33/0x80 [i915] i915_driver_remove+0x4c/0x120 [i915] i915_pci_remove+0x19/0x30 [i915] pci_device_remove+0x32/0xa0 device_release_driver_internal+0x19c/0x200 unbind_store+0x9c/0xb0 and Call Trace: release_nodes+0x11/0x70 devres_release_all+0x8a/0xc0 device_unbind_cleanup+0x9/0x70 device_release_driver_internal+0x1c1/0x200 unbind_store+0x9c/0xb0 This means that in i915, if use devm, we cannot gurantee that hwmon will always be released before drvdata. Which means that we have a uaf if hwmon sysfs is accessed when drvdata has been released but hwmon hasn't. The only way out of this seems to be do get rid of devm_ and release/free everything explicitly during device unbind. v2: Change commit message and other minor code changes v3: Cleanup from i915_hwmon_register on error (Armin Wolf) v4: Eliminate potential static analyzer warning (Rodrigo) Eliminate fetch_and_zero (Jani) v5: Restore previous logic for ddat_gt->hwmon_dev error return (Andi)

In the Linux kernel, the following vulnerability has been resolved: crypto: starfive - Do not free stack buffer RSA text data uses variable length buffer allocated in software stack. Calling kfree on it causes undefined behaviour in subsequent operations.

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: do not call vma_add_reservation upon ENOMEM sysbot reported a splat [1] on __unmap_hugepage_range(). This is because vma_needs_reservation() can return -ENOMEM if allocate_file_region_entries() fails to allocate the file_region struct for the reservation. Check for that and do not call vma_add_reservation() if that is the case, otherwise region_abort() and region_del() will see that we do not have any file_regions. If we detect that vma_needs_reservation() returned -ENOMEM, we clear the hugetlb_restore_reserve flag as if this reservation was still consumed, so free_huge_folio() will not increment the resv count. [1] https://lore.kernel.org/linux-mm/0000000000004096100617c58d54@google.com/T/#ma5983bc1ab18a54910da83416b3f89f3c7ee43aa

In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with small possibility, the root cause is exactly the same as commit bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"") However, Dan reported another hang after that, and junxiao investigated the problem and found out that this is caused by plugged bio can't issue from raid5d(). Current implementation in raid5d() has a weird dependence: 1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' to clear MD_SB_CHANGE_PENDING; 2) raid5d() handles IO in a deadloop, until all IO are issued; 3) IO from raid5d() must wait for MD_SB_CHANGE_PENDING to be cleared; This behaviour is introduce before v2.6, and for consequence, if other context hold 'reconfig_mutex', and md_check_recovery() can't update super_block, then raid5d() will waste one cpu 100% by the deadloop, until 'reconfig_mutex' is released. Refer to the implementation from raid1 and raid10, fix this problem by skipping issue IO if MD_SB_CHANGE_PENDING is still set after md_check_recovery(), daemon thread will be woken up when 'reconfig_mutex' is released. Meanwhile, the hang problem will be fixed as well.

In the Linux kernel, the following vulnerability has been resolved: fbdev: savage: Handle err return when savagefb_check_var failed The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero") checks the value of pixclock to avoid divide-by-zero error. However the function savagefb_probe doesn't handle the error return of savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error.

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL commit a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc") includes support for __GFP_NOFAIL, but it presents a conflict with commit dd544141b9eb ("vmalloc: back off when the current task is OOM-killed"). A possible scenario is as follows: process-a __vmalloc_node_range(GFP_KERNEL | __GFP_NOFAIL) __vmalloc_area_node() vm_area_alloc_pages() --> oom-killer send SIGKILL to process-a if (fatal_signal_pending(current)) break; --> return NULL; To fix this, do not check fatal_signal_pending() in vm_area_alloc_pages() if __GFP_NOFAIL set. This issue occurred during OPLUS KASAN TEST. Below is part of the log -> oom-killer sends signal to process [65731.222840] [ T1308] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/apps/uid_10198,task=gs.intelligence,pid=32454,uid=10198 [65731.259685] [T32454] Call trace: [65731.259698] [T32454] dump_backtrace+0xf4/0x118 [65731.259734] [T32454] show_stack+0x18/0x24 [65731.259756] [T32454] dump_stack_lvl+0x60/0x7c [65731.259781] [T32454] dump_stack+0x18/0x38 [65731.259800] [T32454] mrdump_common_die+0x250/0x39c [mrdump] [65731.259936] [T32454] ipanic_die+0x20/0x34 [mrdump] [65731.260019] [T32454] atomic_notifier_call_chain+0xb4/0xfc [65731.260047] [T32454] notify_die+0x114/0x198 [65731.260073] [T32454] die+0xf4/0x5b4 [65731.260098] [T32454] die_kernel_fault+0x80/0x98 [65731.260124] [T32454] __do_kernel_fault+0x160/0x2a8 [65731.260146] [T32454] do_bad_area+0x68/0x148 [65731.260174] [T32454] do_mem_abort+0x151c/0x1b34 [65731.260204] [T32454] el1_abort+0x3c/0x5c [65731.260227] [T32454] el1h_64_sync_handler+0x54/0x90 [65731.260248] [T32454] el1h_64_sync+0x68/0x6c [65731.260269] [T32454] z_erofs_decompress_queue+0x7f0/0x2258 --> be->decompressed_pages = kvcalloc(be->nr_pages, sizeof(struct page *), GFP_KERNEL | __GFP_NOFAIL); kernel panic by NULL pointer dereference. erofs assume kvmalloc with __GFP_NOFAIL never return NULL. [65731.260293] [T32454] z_erofs_runqueue+0xf30/0x104c [65731.260314] [T32454] z_erofs_readahead+0x4f0/0x968 [65731.260339] [T32454] read_pages+0x170/0xadc [65731.260364] [T32454] page_cache_ra_unbounded+0x874/0xf30 [65731.260388] [T32454] page_cache_ra_order+0x24c/0x714 [65731.260411] [T32454] filemap_fault+0xbf0/0x1a74 [65731.260437] [T32454] __do_fault+0xd0/0x33c [65731.260462] [T32454] handle_mm_fault+0xf74/0x3fe0 [65731.260486] [T32454] do_mem_abort+0x54c/0x1b34 [65731.260509] [T32454] el0_da+0x44/0x94 [65731.260531] [T32454] el0t_64_sync_handler+0x98/0xb4 [65731.260553] [T32454] el0t_64_sync+0x198/0x19c

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension If a process module does not have base config extension then the same format applies to all of it's inputs and the process->base_config_ext is NULL, causing NULL dereference when specifically crafted topology and sequences used.

In the Linux kernel, the following vulnerability has been resolved: xfs: fix log recovery buffer allocation for the legacy h_size fixup Commit a70f9fe52daa ("xfs: detect and handle invalid iclog size set by mkfs") added a fixup for incorrect h_size values used for the initial umount record in old xfsprogs versions. Later commit 0c771b99d6c9 ("xfs: clean up calculation of LR header blocks") cleaned up the log reover buffer calculation, but stoped using the fixed up h_size value to size the log recovery buffer, which can lead to an out of bounds access when the incorrect h_size does not come from the old mkfs tool, but a fuzzer. Fix this by open coding xlog_logrec_hblks and taking the fixed h_size into account for this calculation.

In the Linux kernel, the following vulnerability has been resolved: um: Add winch to winch_handlers before registering winch IRQ Registering a winch IRQ is racy, an interrupt may occur before the winch is added to the winch_handlers list. If that happens, register_winch_irq() adds to that list a winch that is scheduled to be (or has already been) freed, causing a panic later in winch_cleanup(). Avoid the race by adding the winch to the winch_handlers list before registering the IRQ, and rolling back if um_request_irq() fails.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix buffer size in gfx_v9_4_3_init_ cp_compute_microcode() and rlc_microcode() The function gfx_v9_4_3_init_microcode in gfx_v9_4_3.c was generating about potential truncation of output when using the snprintf function. The issue was due to the size of the buffer 'ucode_prefix' being too small to accommodate the maximum possible length of the string being written into it. The string being written is "amdgpu/%s_mec.bin" or "amdgpu/%s_rlc.bin", where %s is replaced by the value of 'chip_name'. The length of this string without the %s is 16 characters. The warning message indicated that 'chip_name' could be up to 29 characters long, resulting in a total of 45 characters, which exceeds the buffer size of 30 characters. To resolve this issue, the size of the 'ucode_prefix' buffer has been reduced from 30 to 15. This ensures that the maximum possible length of the string being written into the buffer will not exceed its size, thus preventing potential buffer overflow and truncation issues. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c: In function ‘gfx_v9_4_3_early_init’: drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name); | ^~ ...... 439 | r = gfx_v9_4_3_init_rlc_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30 379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name); | ^~ ...... 443 | r = gfx_v9_4_3_init_cp_compute_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30 413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In the Linux kernel, the following vulnerability has been resolved: riscv: prevent pt_regs corruption for secondary idle threads Top of the kernel thread stack should be reserved for pt_regs. However this is not the case for the idle threads of the secondary boot harts. Their stacks overlap with their pt_regs, so both may get corrupted. Similar issue has been fixed for the primary hart, see c7cdd96eca28 ("riscv: prevent stack corruption by reserving task_pt_regs(p) early"). However that fix was not propagated to the secondary harts. The problem has been noticed in some CPU hotplug tests with V enabled. The function smp_callin stored several registers on stack, corrupting top of pt_regs structure including status field. As a result, kernel attempted to save or restore inexistent V context.

In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_dpsub: Always register bridge We must always register the DRM bridge, since zynqmp_dp_hpd_work_func calls drm_bridge_hpd_notify, which in turn expects hpd_mutex to be initialized. We do this before zynqmp_dpsub_drm_init since that calls drm_bridge_attach. This fixes the following lockdep warning: [ 19.217084] ------------[ cut here ]------------ [ 19.227530] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 19.227768] WARNING: CPU: 0 PID: 140 at kernel/locking/mutex.c:582 __mutex_lock+0x4bc/0x550 [ 19.241696] Modules linked in: [ 19.244937] CPU: 0 PID: 140 Comm: kworker/0:4 Not tainted 6.6.20+ #96 [ 19.252046] Hardware name: xlnx,zynqmp (DT) [ 19.256421] Workqueue: events zynqmp_dp_hpd_work_func [ 19.261795] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 19.269104] pc : __mutex_lock+0x4bc/0x550 [ 19.273364] lr : __mutex_lock+0x4bc/0x550 [ 19.277592] sp : ffffffc085c5bbe0 [ 19.281066] x29: ffffffc085c5bbe0 x28: 0000000000000000 x27: ffffff88009417f8 [ 19.288624] x26: ffffff8800941788 x25: ffffff8800020008 x24: ffffffc082aa3000 [ 19.296227] x23: ffffffc080d90e3c x22: 0000000000000002 x21: 0000000000000000 [ 19.303744] x20: 0000000000000000 x19: ffffff88002f5210 x18: 0000000000000000 [ 19.311295] x17: 6c707369642e3030 x16: 3030613464662072 x15: 0720072007200720 [ 19.318922] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 0000000000000001 [ 19.326442] x11: 0001ffc085c5b940 x10: 0001ff88003f388b x9 : 0001ff88003f3888 [ 19.334003] x8 : 0001ff88003f3888 x7 : 0000000000000000 x6 : 0000000000000000 [ 19.341537] x5 : 0000000000000000 x4 : 0000000000001668 x3 : 0000000000000000 [ 19.349054] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff88003f3880 [ 19.356581] Call trace: [ 19.359160] __mutex_lock+0x4bc/0x550 [ 19.363032] mutex_lock_nested+0x24/0x30 [ 19.367187] drm_bridge_hpd_notify+0x2c/0x6c [ 19.371698] zynqmp_dp_hpd_work_func+0x44/0x54 [ 19.376364] process_one_work+0x3ac/0x988 [ 19.380660] worker_thread+0x398/0x694 [ 19.384736] kthread+0x1bc/0x1c0 [ 19.388241] ret_from_fork+0x10/0x20 [ 19.392031] irq event stamp: 183 [ 19.395450] hardirqs last enabled at (183): [<ffffffc0800b9278>] finish_task_switch.isra.0+0xa8/0x2d4 [ 19.405140] hardirqs last disabled at (182): [<ffffffc081ad3754>] __schedule+0x714/0xd04 [ 19.413612] softirqs last enabled at (114): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.423128] softirqs last disabled at (110): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.432614] ---[ end trace 0000000000000000 ]--- (cherry picked from commit 61ba791c4a7a09a370c45b70a81b8c7d4cf6b2ae)

In the Linux kernel, the following vulnerability has been resolved: dma-mapping: benchmark: handle NUMA_NO_NODE correctly cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark() resulting in the following sanitizer report: UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask [64][1]' CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) ubsan_epilogue (lib/ubsan.c:232) __ubsan_handle_out_of_bounds (lib/ubsan.c:429) cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline] do_map_benchmark (kernel/dma/map_benchmark.c:104) map_benchmark_ioctl (kernel/dma/map_benchmark.c:246) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Use cpumask_of_node() in place when binding a kernel thread to a cpuset of a particular node. Note that the provided node id is checked inside map_benchmark_ioctl(). It's just a NUMA_NO_NODE case which is not handled properly later. Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: dma-buf/sw-sync: don't enable IRQ from sync_print_obj() Since commit a6aa8fca4d79 ("dma-buf/sw-sync: Reduce irqsave/irqrestore from known context") by error replaced spin_unlock_irqrestore() with spin_unlock_irq() for both sync_debugfs_show() and sync_print_obj() despite sync_print_obj() is called from sync_debugfs_show(), lockdep complains inconsistent lock state warning. Use plain spin_{lock,unlock}() for sync_print_obj(), for sync_debugfs_show() is already using spin_{lock,unlock}_irq().

In the Linux kernel, the following vulnerability has been resolved: bpf: Allow delete from sockmap/sockhash only if update is allowed We have seen an influx of syzkaller reports where a BPF program attached to a tracepoint triggers a locking rule violation by performing a map_delete on a sockmap/sockhash. We don't intend to support this artificial use scenario. Extend the existing verifier allowed-program-type check for updating sockmap/sockhash to also cover deleting from a map. From now on only BPF programs which were previously allowed to update sockmap/sockhash can delete from these map types.

In the Linux kernel, the following vulnerability has been resolved: tracing/probes: fix error check in parse_btf_field() btf_find_struct_member() might return NULL or an error via the ERR_PTR() macro. However, its caller in parse_btf_field() only checks for the NULL condition. Fix this by using IS_ERR() and returning the error up the stack.

In the Linux kernel, the following vulnerability has been resolved: tpm_tis_spi: Account for SPI header when allocating TPM SPI xfer buffer The TPM SPI transfer mechanism uses MAX_SPI_FRAMESIZE for computing the maximum transfer length and the size of the transfer buffer. As such, it does not account for the 4 bytes of header that prepends the SPI data frame. This can result in out-of-bounds accesses and was confirmed with KASAN. Introduce SPI_HDRSIZE to account for the header and use to allocate the transfer buffer.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix loop termination condition in gss_free_in_token_pages() The in_token->pages[] array is not NULL terminated. This results in the following KASAN splat: KASAN: maybe wild-memory-access in range [0x04a2013400000008-0x04a201340000000f]

In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset() pci_alloc_irq_vectors() allocates an irq vector. When devm_add_action() fails, the irq vector is not freed, which leads to a memory leak. Replace the devm_add_action with devm_add_action_or_reset to ensure the irq vector can be destroyed when it fails.