In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix not cleanup led when bt_init fails bt_init() calls bt_leds_init() to register led, but if it fails later, bt_leds_cleanup() is not called to unregister it. This can cause panic if the argument "bluetooth-power" in text is freed and then another led_trigger_register() tries to access it: BUG: unable to handle page fault for address: ffffffffc06d3bc0 RIP: 0010:strcmp+0xc/0x30 Call Trace: <TASK> led_trigger_register+0x10d/0x4f0 led_trigger_register_simple+0x7d/0x100 bt_init+0x39/0xf7 [bluetooth] do_one_initcall+0xd0/0x4e0

In the Linux kernel, the following vulnerability has been resolved: xen-netfront: Fix NULL sring after live migration A NAPI is setup for each network sring to poll data to kernel The sring with source host is destroyed before live migration and new sring with target host is setup after live migration. The NAPI for the old sring is not deleted until setup new sring with target host after migration. With busy_poll/busy_read enabled, the NAPI can be polled before got deleted when resume VM. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xennet_poll+0xae/0xd20 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Call Trace: finish_task_switch+0x71/0x230 timerqueue_del+0x1d/0x40 hrtimer_try_to_cancel+0xb5/0x110 xennet_alloc_rx_buffers+0x2a0/0x2a0 napi_busy_loop+0xdb/0x270 sock_poll+0x87/0x90 do_sys_poll+0x26f/0x580 tracing_map_insert+0x1d4/0x2f0 event_hist_trigger+0x14a/0x260 finish_task_switch+0x71/0x230 __schedule+0x256/0x890 recalc_sigpending+0x1b/0x50 xen_sched_clock+0x15/0x20 __rb_reserve_next+0x12d/0x140 ring_buffer_lock_reserve+0x123/0x3d0 event_triggers_call+0x87/0xb0 trace_event_buffer_commit+0x1c4/0x210 xen_clocksource_get_cycles+0x15/0x20 ktime_get_ts64+0x51/0xf0 SyS_ppoll+0x160/0x1a0 SyS_ppoll+0x160/0x1a0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x41/0xa6 ... RIP: xennet_poll+0xae/0xd20 RSP: ffffb4f041933900 CR2: 0000000000000008 ---[ end trace f8601785b354351c ]--- xen frontend should remove the NAPIs for the old srings before live migration as the bond srings are destroyed There is a tiny window between the srings are set to NULL and the NAPIs are disabled, It is safe as the NAPI threads are still frozen at that time

In the Linux kernel, the following vulnerability has been resolved: NFC: nci: Bounds check struct nfc_target arrays While running under CONFIG_FORTIFY_SOURCE=y, syzkaller reported: memcpy: detected field-spanning write (size 129) of single field "target->sensf_res" at net/nfc/nci/ntf.c:260 (size 18) This appears to be a legitimate lack of bounds checking in nci_add_new_protocol(). Add the missing checks.

In the Linux kernel, the following vulnerability has been resolved: net: mvneta: Prevent out of bounds read in mvneta_config_rss() The pp->indir[0] value comes from the user. It is passed to: if (cpu_online(pp->rxq_def)) inside the mvneta_percpu_elect() function. It needs bounds checkeding to ensure that it is not beyond the end of the cpu bitmap.

In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: Fix potential use-after-free in hisi_femac_rx() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free.

In the Linux kernel, the following vulnerability has been resolved: net: mdio: fix unbalanced fwnode reference count in mdio_device_release() There is warning report about of_node refcount leak while probing mdio device: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@710700c0/ethernet@4 In of_mdiobus_register_device(), we increase fwnode refcount by fwnode_handle_get() before associating the of_node with mdio device, but it has never been decreased in normal path. Since that, in mdio_device_release(), it needs to call fwnode_handle_put() in addition instead of calling kfree() directly. After above, just calling mdio_device_free() in the error handle path of of_mdiobus_register_device() is enough to keep the refcount balanced.

In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: Fix potential use-after-free in hix5hd2_rx() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free.

In the Linux kernel, the following vulnerability has been resolved: ethernet: aeroflex: fix potential skb leak in greth_init_rings() The greth_init_rings() function won't free the newly allocated skb when dma_mapping_error() returns error, so add dev_kfree_skb() to fix it. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: rtc: cmos: Fix event handler registration ordering issue Because acpi_install_fixed_event_handler() enables the event automatically on success, it is incorrect to call it before the handler routine passed to it is ready to handle events. Unfortunately, the rtc-cmos driver does exactly the incorrect thing by calling cmos_wake_setup(), which passes rtc_handler() to acpi_install_fixed_event_handler(), before cmos_do_probe(), because rtc_handler() uses dev_get_drvdata() to get to the cmos object pointer and the driver data pointer is only populated in cmos_do_probe(). This leads to a NULL pointer dereference in rtc_handler() on boot if the RTC fixed event happens to be active at the init time. To address this issue, change the initialization ordering of the driver so that cmos_wake_setup() is always called after a successful cmos_do_probe() call. While at it, change cmos_pnp_probe() to call cmos_do_probe() after the initial if () statement used for computing the IRQ argument to be passed to cmos_do_probe() which is cleaner than calling it in each branch of that if () (local variable "irq" can be of type int, because it is passed to that function as an argument of type int). Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number of systems, because previously it only affected systems with ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that commit.

In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx() The bounds checks in snd_soc_put_volsw_sx() are only being applied to the first channel, meaning it is possible to write out of bounds values to the second channel in stereo controls. Add appropriate checks.

In the Linux kernel, the following vulnerability has been resolved: perf: Fix perf_pending_task() UaF Per syzbot it is possible for perf_pending_task() to run after the event is free()'d. There are two related but distinct cases: - the task_work was already queued before destroying the event; - destroying the event itself queues the task_work. The first cannot be solved using task_work_cancel() since perf_release() itself might be called from a task_work (____fput), which means the current->task_works list is already empty and task_work_cancel() won't be able to find the perf_pending_task() entry. The simplest alternative is extending the perf_event lifetime to cover the task_work. The second is just silly, queueing a task_work while you know the event is going away makes no sense and is easily avoided by re-arranging how the event is marked STATE_DEAD and ensuring it goes through STATE_OFF on the way down.

In the Linux kernel, the following vulnerability has been resolved: igb: Initialize mailbox message for VF reset When a MAC address is not assigned to the VF, that portion of the message sent to the VF is not set. The memory, however, is allocated from the stack meaning that information may be leaked to the VM. Initialize the message buffer to 0 so that no information is passed to the VM in this case.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Prevent buffer overflow in setup handler Setup function uvc_function_setup permits control transfer requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), data stage handler for OUT transfer uses memcpy to copy req->actual bytes to uvc_event->data.data array of size 60. This may result in an overflow of 4 bytes.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix u8 overflow By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@...

In the Linux kernel, the following vulnerability has been resolved: udf: Fix preallocation discarding at indirect extent boundary When preallocation extent is the first one in the extent block, the code would corrupt extent tree header instead. Fix the problem and use udf_delete_aext() for deleting extent to avoid some code duplication.

In the Linux kernel, the following vulnerability has been resolved: net: napi: Prevent overflow of napi_defer_hard_irqs In commit 6f8b12d661d0 ("net: napi: add hard irqs deferral feature") napi_defer_irqs was added to net_device and napi_defer_irqs_count was added to napi_struct, both as type int. This value never goes below zero, so there is not reason for it to be a signed int. Change the type for both from int to u32, and add an overflow check to sysfs to limit the value to S32_MAX. The limit of S32_MAX was chosen because the practical limit before this patch was S32_MAX (anything larger was an overflow) and thus there are no behavioral changes introduced. If the extra bit is needed in the future, the limit can be raised. Before this patch: $ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs' $ cat /sys/class/net/eth4/napi_defer_hard_irqs -2147483647 After this patch: $ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs' bash: line 0: echo: write error: Numerical result out of range Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned: include/linux/netdevice.h: unsigned int tx_queue_len; And has an overflow check: dev_change_tx_queue_len(..., unsigned long new_len): if (new_len != (unsigned int)new_len) return -ERANGE;

In the Linux kernel, the following vulnerability has been resolved: x86/mm/ident_map: Use gbpages only where full GB page should be mapped. When ident_pud_init() uses only GB pages to create identity maps, large ranges of addresses not actually requested can be included in the resulting table; a 4K request will map a full GB. This can include a lot of extra address space past that requested, including areas marked reserved by the BIOS. That allows processor speculation into reserved regions, that on UV systems can cause system halts. Only use GB pages when map creation requests include the full GB page of space. Fall back to using smaller 2M pages when only portions of a GB page are included in the request. No attempt is made to coalesce mapping requests. If a request requires a map entry at the 2M (pmd) level, subsequent mapping requests within the same 1G region will also be at the pmd level, even if adjacent or overlapping such requests could have been combined to map a full GB page. Existing usage starts with larger regions and then adds smaller regions, so this should not have any great consequence.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid overflow assignment in link_dp_cts sampling_rate is an uint8_t but is assigned an unsigned int, and thus it can overflow. As a result, sampling_rate is changed to uint32_t. Similarly, LINK_QUAL_PATTERN_SET has a size of 2 bits, and it should only be assigned to a value less or equal than 4. This fixes 2 INTEGER_OVERFLOW issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix access to uninitialised lock in fc replay path The following kernel trace can be triggered with fstest generic/629 when executed against a filesystem with fast-commit feature enabled: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 866 Comm: mount Not tainted 6.10.0+ #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x66/0x90 register_lock_class+0x759/0x7d0 __lock_acquire+0x85/0x2630 ? __find_get_block+0xb4/0x380 lock_acquire+0xd1/0x2d0 ? __ext4_journal_get_write_access+0xd5/0x160 _raw_spin_lock+0x33/0x40 ? __ext4_journal_get_write_access+0xd5/0x160 __ext4_journal_get_write_access+0xd5/0x160 ext4_reserve_inode_write+0x61/0xb0 __ext4_mark_inode_dirty+0x79/0x270 ? ext4_ext_replay_set_iblocks+0x2f8/0x450 ext4_ext_replay_set_iblocks+0x330/0x450 ext4_fc_replay+0x14c8/0x1540 ? jread+0x88/0x2e0 ? rcu_is_watching+0x11/0x40 do_one_pass+0x447/0xd00 jbd2_journal_recover+0x139/0x1b0 jbd2_journal_load+0x96/0x390 ext4_load_and_init_journal+0x253/0xd40 ext4_fill_super+0x2cc6/0x3180 ... In the replay path there's an attempt to lock sbi->s_bdev_wb_lock in function ext4_check_bdev_write_error(). Unfortunately, at this point this spinlock has not been initialized yet. Moving it's initialization to an earlier point in __ext4_fill_super() fixes this splat.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: Avoid a bad reference count on CPU node In the parse_perf_domain function, if the call to of_parse_phandle_with_args returns an error, then the reference to the CPU device node that was acquired at the start of the function would not be properly decremented. Address this by declaring the variable with the __free(device_node) cleanup attribute.