In the Linux kernel, the following vulnerability has been resolved: media: xc2028: avoid use-after-free in load_firmware_cb() syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tuner_remove <= free dvb_frontend ... request_firmware_work_func <= the firmware is ready load_firmware_cb <= but now the dvb_frontend has been freed To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is null, report a warning and just return. [1]: ================================================================== BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0 Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504 Call trace: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 process_one_work+0x770/0x1824 worker_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Allocated by task 6504: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 really_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 device_initial_probe+0x20/0x30 bus_probe_device+0x184/0x200 device_add+0x924/0x12c0 device_register+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Freed by task 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 i2c_device_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc device_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 The buggy address belongs to the object at ffff8000d7ca2000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 776 bytes inside of 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800) The buggy address belongs to the page: page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0 flags: 0x7ff800000000100(slab) raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [2] Actually, it is allocated for struct tuner, and dvb_frontend is inside.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null pointer deref in dcn20_resource.c Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip Recompute DSC Params if no Stream on Link [why] Encounter NULL pointer dereference uner mst + dsc setup. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 [how] dsc recompute should be skipped if no mode change detected on the new request. If detected, keep checking whether the stream is already on current state or not. (cherry picked from commit 8151a6c13111b465dbabe07c19f572f7cbd16fef)

In the Linux kernel, the following vulnerability has been resolved: drm/client: fix null pointer dereference in drm_client_modeset_probe In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is assigned to modeset->mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: serial: core: check uartclk for zero to avoid divide by zero Calling ioctl TIOCSSERIAL with an invalid baud_base can result in uartclk being zero, which will result in a divide by zero error in uart_get_divisor(). The check for uartclk being zero in uart_set_info() needs to be done before other settings are made as subsequent calls to ioctl TIOCSSERIAL for the same port would be impacted if the uartclk check was done where uartclk gets set. Oops: divide error: 0000 PREEMPT SMP KASAN PTI RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580) Call Trace: <TASK> serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576 drivers/tty/serial/8250/8250_port.c:2589) serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502 drivers/tty/serial/8250/8250_port.c:2741) serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862) uart_change_line_settings (./include/linux/spinlock.h:376 ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222) uart_port_startup (drivers/tty/serial/serial_core.c:342) uart_startup (drivers/tty/serial/serial_core.c:368) uart_set_info (drivers/tty/serial/serial_core.c:1034) uart_set_info_user (drivers/tty/serial/serial_core.c:1059) tty_set_serial (drivers/tty/tty_io.c:2637) tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791) __x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907 fs/ioctl.c:893 fs/ioctl.c:893) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Rule: add

In the Linux kernel, the following vulnerability has been resolved: memcg: protect concurrent access to mem_cgroup_idr Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") decoupled the memcg IDs from the CSS ID space to fix the cgroup creation failures. It introduced IDR to maintain the memcg ID space. The IDR depends on external synchronization mechanisms for modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace() happen within css callback and thus are protected through cgroup_mutex from concurrent modifications. However idr_remove() for mem_cgroup_idr was not protected against concurrency and can be run concurrently for different memcgs when they hit their refcnt to zero. Fix that. We have been seeing list_lru based kernel crashes at a low frequency in our fleet for a long time. These crashes were in different part of list_lru code including list_lru_add(), list_lru_del() and reparenting code. Upon further inspection, it looked like for a given object (dentry and inode), the super_block's list_lru didn't have list_lru_one for the memcg of that object. The initial suspicions were either the object is not allocated through kmem_cache_alloc_lru() or somehow memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but returned success. No evidence were found for these cases. Looking more deeply, we started seeing situations where valid memcg's id is not present in mem_cgroup_idr and in some cases multiple valid memcgs have same id and mem_cgroup_idr is pointing to one of them. So, the most reasonable explanation is that these situations can happen due to race between multiple idr_remove() calls or race between idr_alloc()/idr_replace() and idr_remove(). These races are causing multiple memcgs to acquire the same ID and then offlining of one of them would cleanup list_lrus on the system for all of them. Later access from other memcgs to the list_lru cause crashes due to missing list_lru_one.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix overflow in get_free_elt() "tracing_map->next_elt" in get_free_elt() is at risk of overflowing. Once it overflows, new elements can still be inserted into the tracing_map even though the maximum number of elements (`max_elts`) has been reached. Continuing to insert elements after the overflow could result in the tracing_map containing "tracing_map->max_size" elements, leaving no empty entries. If any attempt is made to insert an element into a full tracing_map using `__tracing_map_insert()`, it will cause an infinite loop with preemption disabled, leading to a CPU hang problem. Fix this by preventing any further increments to "tracing_map->next_elt" once it reaches "tracing_map->max_elt".

In the Linux kernel, the following vulnerability has been resolved: padata: Fix possible divide-by-0 panic in padata_mt_helper() We are hit with a not easily reproducible divide-by-0 panic in padata.c at bootup time. [ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI [ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1 [ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021 [ 10.017908] Workqueue: events_unbound padata_mt_helper [ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0 : [ 10.017963] Call Trace: [ 10.017968] <TASK> [ 10.018004] ? padata_mt_helper+0x39/0xb0 [ 10.018084] process_one_work+0x174/0x330 [ 10.018093] worker_thread+0x266/0x3a0 [ 10.018111] kthread+0xcf/0x100 [ 10.018124] ret_from_fork+0x31/0x50 [ 10.018138] ret_from_fork_asm+0x1a/0x30 [ 10.018147] </TASK> Looking at the padata_mt_helper() function, the only way a divide-by-0 panic can happen is when ps->chunk_size is 0. The way that chunk_size is initialized in padata_do_multithreaded(), chunk_size can be 0 when the min_chunk in the passed-in padata_mt_job structure is 0. Fix this divide-by-0 panic by making sure that chunk_size will be at least 1 no matter what the input parameters are.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check in resource_log_pipe_topology_update [WHY] When switching from "Extend" to "Second Display Only" we sometimes call resource_get_otg_master_for_stream on a stream for the eDP, which is disconnected. This leads to a null pointer dereference. [HOW] Added a null check in dc_resource.c/resource_log_pipe_topology_update.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Add error handling to pair_device() hci_conn_params_add() never checks for a NULL value and could lead to a NULL pointer dereference causing a crash. Fixed by adding error handling in the function.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: make apf token non-zero to fix bug In current async pagefault logic, when a page is ready, KVM relies on kvm_arch_can_dequeue_async_page_present() to determine whether to deliver a READY event to the Guest. This function test token value of struct kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a READY event is finished by Guest. If value is zero meaning that a READY event is done, so the KVM can deliver another. But the kvm_arch_setup_async_pf() may produce a valid token with zero value, which is confused with previous mention and may lead the loss of this READY event. This bug may cause task blocked forever in Guest: INFO: task stress:7532 blocked for more than 1254 seconds. Not tainted 5.10.0 #16 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack: 0 pid: 7532 ppid: 1409 flags:0x00000080 Call Trace: __schedule+0x1e7/0x650 schedule+0x46/0xb0 kvm_async_pf_task_wait_schedule+0xad/0xe0 ? exit_to_user_mode_prepare+0x60/0x70 __kvm_handle_async_pf+0x4f/0xb0 ? asm_exc_page_fault+0x8/0x30 exc_page_fault+0x6f/0x110 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x402d00 RSP: 002b:00007ffd31912500 EFLAGS: 00010206 RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0 RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0 RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086 R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000 R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000

In the Linux kernel, the following vulnerability has been resolved: hwmon: Handle failure to register sensor with thermal zone correctly If an attempt is made to a sensor with a thermal zone and it fails, the call to devm_thermal_zone_of_sensor_register() may return -ENODEV. This may result in crashes similar to the following. Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd ... Internal error: Oops: 96000021 [#1] PREEMPT SMP ... pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x18/0x60 lr : thermal_zone_device_update+0x40/0x2e0 sp : ffff800014c4fc60 x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790 x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000 x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000 x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040 x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd Call trace: mutex_lock+0x18/0x60 hwmon_notify_event+0xfc/0x110 0xffffdde1cb7a0a90 0xffffdde1cb7a0b7c irq_thread_fn+0x2c/0xa0 irq_thread+0x134/0x240 kthread+0x178/0x190 ret_from_fork+0x10/0x20 Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02) Jon Hunter reports that the exact call sequence is: hwmon_notify_event() --> hwmon_thermal_notify() --> thermal_zone_device_update() --> update_temperature() --> mutex_lock() The hwmon core needs to handle all errors returned from calls to devm_thermal_zone_of_sensor_register(). If the call fails with -ENODEV, report that the sensor was not attached to a thermal zone but continue to register the hwmon device.

In the Linux kernel, the following vulnerability has been resolved: ice: fix concurrent reset and removal of VFs Commit c503e63200c6 ("ice: Stop processing VF messages during teardown") introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is intended to prevent some issues with concurrently handling messages from VFs while tearing down the VFs. This change was motivated by crashes caused while tearing down and bringing up VFs in rapid succession. It turns out that the fix actually introduces issues with the VF driver caused because the PF no longer responds to any messages sent by the VF during its .remove routine. This results in the VF potentially removing its DMA memory before the PF has shut down the device queues. Additionally, the fix doesn't actually resolve concurrency issues within the ice driver. It is possible for a VF to initiate a reset just prior to the ice driver removing VFs. This can result in the remove task concurrently operating while the VF is being reset. This results in similar memory corruption and panics purportedly fixed by that commit. Fix this concurrency at its root by protecting both the reset and removal flows using the existing VF cfg_lock. This ensures that we cannot remove the VF while any outstanding critical tasks such as a virtchnl message or a reset are occurring. This locking change also fixes the root cause originally fixed by commit c503e63200c6 ("ice: Stop processing VF messages during teardown"), so we can simply revert it. Note that I kept these two changes together because simply reverting the original commit alone would leave the driver vulnerable to worse race conditions.

In the Linux kernel, the following vulnerability has been resolved: bpf: Add schedule points in batch ops syzbot reported various soft lockups caused by bpf batch operations. INFO: task kworker/1:1:27 blocked for more than 140 seconds. INFO: task hung in rcu_barrier Nothing prevents batch ops to process huge amount of data, we need to add schedule points in them. Note that maybe_wait_bpf_programs(map) calls from generic_map_delete_batch() can be factorized by moving the call after the loop. This will be done later in -next tree once we get this fix merged, unless there is strong opinion doing this optimization sooner.

In the Linux kernel, the following vulnerability has been resolved: CDC-NCM: avoid overflow in sanity checking A broken device may give an extreme offset like 0xFFF0 and a reasonable length for a fragment. In the sanity check as formulated now, this will create an integer overflow, defeating the sanity check. Both offset and offset + len need to be checked in such a manner that no overflow can occur. And those quantities should be unsigned.

In the Linux kernel, the following vulnerability has been resolved: io_uring: add a schedule point in io_add_buffers() Looping ~65535 times doing kmalloc() calls can trigger soft lockups, especially with DEBUG features (like KASAN). [ 253.536212] watchdog: BUG: soft lockup - CPU#64 stuck for 26s! [b219417889:12575] [ 253.544433] Modules linked in: vfat fat i2c_mux_pca954x i2c_mux spidev cdc_acm xhci_pci xhci_hcd sha3_generic gq(O) [ 253.544451] CPU: 64 PID: 12575 Comm: b219417889 Tainted: G S O 5.17.0-smp-DEV #801 [ 253.544457] RIP: 0010:kernel_text_address (./include/asm-generic/sections.h:192 ./include/linux/kallsyms.h:29 kernel/extable.c:67 kernel/extable.c:98) [ 253.544464] Code: 0f 93 c0 48 c7 c1 e0 63 d7 a4 48 39 cb 0f 92 c1 20 c1 0f b6 c1 5b 5d c3 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 48 89 fb <48> c7 c0 00 00 80 a0 41 be 01 00 00 00 48 39 c7 72 0c 48 c7 c0 40 [ 253.544468] RSP: 0018:ffff8882d8baf4c0 EFLAGS: 00000246 [ 253.544471] RAX: 1ffff1105b175e00 RBX: ffffffffa13ef09a RCX: 00000000a13ef001 [ 253.544474] RDX: ffffffffa13ef09a RSI: ffff8882d8baf558 RDI: ffffffffa13ef09a [ 253.544476] RBP: ffff8882d8baf4d8 R08: ffff8882d8baf5e0 R09: 0000000000000004 [ 253.544479] R10: ffff8882d8baf5e8 R11: ffffffffa0d59a50 R12: ffff8882eab20380 [ 253.544481] R13: ffffffffa0d59a50 R14: dffffc0000000000 R15: 1ffff1105b175eb0 [ 253.544483] FS: 00000000016d3380(0000) GS:ffff88af48c00000(0000) knlGS:0000000000000000 [ 253.544486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 253.544488] CR2: 00000000004af0f0 CR3: 00000002eabfa004 CR4: 00000000003706e0 [ 253.544491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 253.544492] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 253.544494] Call Trace: [ 253.544496] <TASK> [ 253.544498] ? io_queue_sqe (fs/io_uring.c:7143) [ 253.544505] __kernel_text_address (kernel/extable.c:78) [ 253.544508] unwind_get_return_address (arch/x86/kernel/unwind_frame.c:19) [ 253.544514] arch_stack_walk (arch/x86/kernel/stacktrace.c:27) [ 253.544517] ? io_queue_sqe (fs/io_uring.c:7143) [ 253.544521] stack_trace_save (kernel/stacktrace.c:123) [ 253.544527] ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515) [ 253.544531] ? ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515) [ 253.544533] ? __kasan_kmalloc (mm/kasan/common.c:524) [ 253.544535] ? kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567) [ 253.544541] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828) [ 253.544544] ? __io_queue_sqe (fs/io_uring.c:?) [ 253.544551] __kasan_kmalloc (mm/kasan/common.c:524) [ 253.544553] kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567) [ 253.544556] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828) [ 253.544560] io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828) [ 253.544564] ? __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) [ 253.544567] ? __kasan_slab_alloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) [ 253.544569] ? kmem_cache_alloc_bulk (mm/slab.h:732 mm/slab.c:3546) [ 253.544573] ? __io_alloc_req_refill (fs/io_uring.c:2078) [ 253.544578] ? io_submit_sqes (fs/io_uring.c:7441) [ 253.544581] ? __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uring.c:10096) [ 253.544584] ? __x64_sys_io_uring_enter (fs/io_uring.c:10096) [ 253.544587] ? do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [ 253.544590] ? entry_SYSCALL_64_after_hwframe (??:?) [ 253.544596] __io_queue_sqe (fs/io_uring.c:?) [ 253.544600] io_queue_sqe (fs/io_uring.c:7143) [ 253.544603] io_submit_sqe (fs/io_uring.c:?) [ 253.544608] io_submit_sqes (fs/io_uring.c:?) [ 253.544612] __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uri ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unregister flowtable hooks on netns exit Unregister flowtable hooks before they are releases via nf_tables_flowtable_destroy() otherwise hook core reports UAF. BUG: KASAN: use-after-free in nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142 Read of size 4 at addr ffff8880736f7438 by task syz-executor579/3666 CPU: 0 PID: 3666 Comm: syz-executor579 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] __dump_stack lib/dump_stack.c:88 [inline] lib/dump_stack.c:106 dump_stack_lvl+0x1dc/0x2d8 lib/dump_stack.c:106 lib/dump_stack.c:106 print_address_description+0x65/0x380 mm/kasan/report.c:247 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] __kasan_report mm/kasan/report.c:433 [inline] mm/kasan/report.c:450 kasan_report+0x19a/0x1f0 mm/kasan/report.c:450 mm/kasan/report.c:450 nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142 __nf_register_net_hook+0x27e/0x8d0 net/netfilter/core.c:429 net/netfilter/core.c:429 nf_register_net_hook+0xaa/0x180 net/netfilter/core.c:571 net/netfilter/core.c:571 nft_register_flowtable_net_hooks+0x3c5/0x730 net/netfilter/nf_tables_api.c:7232 net/netfilter/nf_tables_api.c:7232 nf_tables_newflowtable+0x2022/0x2cf0 net/netfilter/nf_tables_api.c:7430 net/netfilter/nf_tables_api.c:7430 nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] net/netfilter/nfnetlink.c:652 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] net/netfilter/nfnetlink.c:652 nfnetlink_rcv+0x10e6/0x2550 net/netfilter/nfnetlink.c:652 net/netfilter/nfnetlink.c:652 __nft_release_hook() calls nft_unregister_flowtable_net_hooks() which only unregisters the hooks, then after RCU grace period, it is guaranteed that no packets add new entries to the flowtable (no flow offload rules and flowtable hooks are reachable from packet path), so it is safe to call nf_flow_table_free() which cleans up the remaining entries from the flowtable (both software and hardware) and it unbinds the flow_block.

In the Linux kernel, the following vulnerability has been resolved: nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac() ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX) inclusive. So NFP_MAX_MAC_INDEX (0xff) is a valid id. In order for the error handling path to work correctly, the 'invalid' value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range, inclusive. So set it to -1.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix memory leak during stateful obj update stateful objects can be updated from the control plane. The transaction logic allocates a temporary object for this purpose. The ->init function was called for this object, so plain kfree() leaks resources. We must call ->destroy function of the object. nft_obj_destroy does this, but it also decrements the module refcount, but the update path doesn't increment it. To avoid special-casing the update object release, do module_get for the update case too and release it via nft_obj_destroy().

In the Linux kernel, the following vulnerability has been resolved: configfs: fix a race in configfs_{,un}register_subsystem() When configfs_register_subsystem() or configfs_unregister_subsystem() is executing link_group() or unlink_group(), it is possible that two processes add or delete list concurrently. Some unfortunate interleavings of them can cause kernel panic. One of cases is: A --> B --> C --> D A <-- B <-- C <-- D delete list_head *B | delete list_head *C --------------------------------|----------------------------------- configfs_unregister_subsystem | configfs_unregister_subsystem unlink_group | unlink_group unlink_obj | unlink_obj list_del_init | list_del_init __list_del_entry | __list_del_entry __list_del | __list_del // next == C | next->prev = prev | | next->prev = prev prev->next = next | | // prev == B | prev->next = next Fix this by adding mutex when calling link_group() or unlink_group(), but parent configfs_subsystem is NULL when config_item is root. So I create a mutex configfs_subsystem_mutex.